Lot

0

FULL LOT CATALOG COMING FEBRUARY 20TH!

In DAY 1 - NSI NEWLANDS SYSTEMS & ACCENT STAINLES...

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 905-669-8893 for more information.
You are the current highest bidder! To be sure to win, log in for the live auction broadcast on or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/6
Auctioneer has chosen not to publish the price of this lot
Abbotsford, British Columbia
12.00%
18.00%

Date & TIme:  Tuesday, February 26, 2019 at 10:00 am pst

Sale Location: Auction Center - 30731 Simpson Road, Units 5010 - 505, Abbotsford, BC

Inspection Date:  Monday February 25th, 9AM-4PM or By Appointment

Industry: Stainless Steel Vessel Fabrication & Engineering

Sales Tax: 12% 

18% Buyers Premium applies on all online purchases.   

 A $2000 refundable security deposit is required upon online registration.  See Terms & Conditions Below. 

Featuring: 

PLASMA CUTTING TABLE CUTTING TABLE

2017 Rhino plasma cutting table 9'x29' Shop Series downdraft, S/N17000401, W/ Victor DMC-3000 cutting head, Infinity Linatrol controls w/2017 Thermal Dynamics Ultra Cut 100XT plasma power source

SHEAR & PRESS BRAKE

2013 12'x1/4" Accurshear, hyd. Power squaring shear, Mod. 625012, s/n 6433, CNC back gauge

Accurpress Mod. 7017512, 175-ton x 12" hyd., s/n 5696, ETS power back gauge, Light curtains, 4-way die & rack of dies (sold separate)

HYDRAULIC TUBE BENDER

Baileigh Mandrel tube bender mod. MB-90-NCE-2, 3.54” cap., Y & Z axis 25 program plane positioning sequencing, 190° bending angle, 12” centerline bending radius, full hyd. clamping, 10’, 575V, S/N BL-7178, Schneider Magells programable PLC controls

PLATE ROLLS

2006 FW Faccin hyd. rolls, Mod. DP3, 8'x 8.5" dia., 10hp, Type 2021, s/n 06103058-3113 • Power rolls, 64"

(2) Ecco Hand rolls 3', Mod. X-3614

ANGLE ROLLS

2012 Durma PBH100, CNC hyd. profile angle rolls, s/n 410012157, 4” x 4” x ½” cap., 4.33” top shaft dia., (2) 3.94” planetary shaft dia., 12.4” roll dia., 0 – 26 FPM turning speed, hyd., ESA S530 CNC control, complete w/ extra dies & tooling

Curvatrici Mod. BS 50 profile angle rolls, Type H, 2” x 2” x ¼” cap.

DECOILER & SUPPORT

Ironside coil stock decoiler Mod. 10729, 6' cap., Hypertherm Powermax 35 plasma unit, Diversitech Mini-vac II fume extractor, vari-frequencey drive, pendant control

HD coil storage stands

Mussell 5 tonne under hook coil lifter

4 x 10’ roll-ball-top table

IRONWORKERS

2013 Edwards 75-ton hyd., 5"x5"x3/8 - 90 shearing cap., s/n 11937513A

2006 Fabmaster IW-66K, 66 ton, 4x4x5/16 - 90 shearing cap., hyd., s/n 360243

BANDSAWS

2012 Hydmech VW-18 Sem-Automatic Vertical Bandsaw, s/n JWA0312379B

2015 Ecco horizontal bandsaw Mod. W13185 w/ I/F & O/F rollcase

2001 Doall horizontal bandsaw C-9165,9” x 16” cap. w/ O/F rollcase

General 6.5, 90-040-MI vertical wood saw, 12”

LATHES

Modern Linmac lathe, taper, 680x2000 mm, gap, 3 & 4 jaw chucks, follow & steady, quick change tool post, Fagor 2-axis DRO, s/n 11212

2006 Modern lathe 14x36, 3 jaw, gap, steady rest, s/n 200604

MILLING MACHINES & SUPPORT

2014 Sharp Vertical Milling Machine Mod. 259HD401, S/N 10049, 72"x12" table, Mititoyo 3-Axis DRO

Modern Vertical Milling Machine Mod. YS-2VS-949, 50"x10" table, 3HP, Mititoyo 2-Axis DRO, S/N 070131

2004 Mill Drill Mod. 45, 9” x 31” table

2012 Ecco Mill Drill, Mod MD-930HL-3

(2) 6” machine vise

Inspection tools

SANDING & PIPE EQUIPMENT

Gallant Rotobelt, mod 1, 4? X 132? BELT – 7000 S.F.P.M.

Ridgid 1224 power threader

Ridgid 300-12 power threader

(2) Orbitalum GF4 pipe cutter/notcher

Almi AC150 pipe sander/notcher

Sharp pipe notcher Mod. PN-1505, 5hp

(21) Ridgid tri-stand

SHOP PRESSES

2013 Edwards 40-ton shop press w/shear attach.

50-ton hyd. shop press w/dies

COMPRESSORS

Ingersoll Rand Mod. IRN20H-TAS-HV 20hp screw air compressor, approx. 4,000 hrs., s/n CBV323838

Ingersoll Rand Mod. UP6-7.5TAS-125WD 7.5hp screw air compressor, 5,464 hrs., S/N CBV430806

Ingersoll Rand 1.5hp portable air compressor

WELDING EQUIPMENT & SUPPORT

(30) WELDERS

(4) Miller 350MP (1 BRAND NEW IN BOX)

Miller Millermatic 250MP Welder w/ Spoolmatic 30P Gun

Lincoln Electric power mig 350mp wire feed

(2) Miller Maxstar 280DX (NEW IN BOX)

(10) Miller Maxstar 210

(11) Miller Maxstar 200

Midwest CD100 stud welder

(8) Miller Maxstar 200 in need of repair

(18) Diversitech Fred Mini-Vac II fume extractor

Piranha III tungsten electrode grinder

TEST EQUIPMENT

Turbidity meter – 2016 Pentair Haffman VOS Rota Turbidity 90/25

Haffmans Nibem-TPH meter

Haffmans OPTI inline 02 meter, optihaze meter

Crystal Gauge Cal HP pressure comparator, 15000 PSI/1000 bar

Spectrovision 365 strobe light etc.

TANK HANDLING EQUIPMENT

(2) 2011 J Irizar tank turning roll set, 2.5-ton cap. w/idler, 150 – 3200 mm dia. cap.

(5) tank rotator systems - dual end rotation structure w/ gearmotors and elec. control

STEEL PLATE/COIL HANDLING EQUIPMENT

(2) 2018 Anver VPEI-Gen 2 vac pack, 1,500 lb. 20'x8' load

Anver VLS-08 vac lift, 10'x6' load, 300 lb.

Mussell 5 tonne coil lifter

Spreader bar - 12T x 27'

(2) Caldwell 2T x 12’ & 4’ spreader bar

Plate lifting clamps

OVERHEAD CRANES & SUPPORT

Mussell 5 tonne approx. 55’ span, top rail ride, underslung hoist, single girder, 6-way pendant control

Mussell 2 x 2 tonne gantry crane, 20’ span x 25’ long (dismantled), hoists sold separate

360 degree 15’ jib boom w/base, hoist sold separate

A-frame structure

(3) electric 2T hoist w/ pendant control

 

Sale held in conjunction with Joiner Sales Corp

Auctioneer:

Infinity Asset Solutions Inc

Date & TIme:  Tuesday, February 26, 2019 at 10:00 am pst

Sale Location: Auction Center - 30731 Simpson Road, Units 5010 - 505, Abbotsford, BC

Inspection Date:  Monday February 25th, 9AM-4PM or By Appointment

Industry: Stainless Steel Vessel Fabrication & Engineering

Sales Tax: 12% 

18% Buyers Premium applies on all online purchases.   

 A $2000 refundable security deposit is required upon online registration.  See Terms & Conditions Below. 

Featuring: 

PLASMA CUTTING TABLE CUTTING TABLE

2017 Rhino plasma cutting table 9'x29' Shop Series downdraft, S/N17000401, W/ Victor DMC-3000 cutting head, Infinity Linatrol controls w/2017 Thermal Dynamics Ultra Cut 100XT plasma power source

SHEAR & PRESS BRAKE

2013 12'x1/4" Accurshear, hyd. Power squaring shear, Mod. 625012, s/n 6433, CNC back gauge

Accurpress Mod. 7017512, 175-ton x 12" hyd., s/n 5696, ETS power back gauge, Light curtains, 4-way die & rack of dies (sold separate)

HYDRAULIC TUBE BENDER

Baileigh Mandrel tube bender mod. MB-90-NCE-2, 3.54” cap., Y & Z axis 25 program plane positioning sequencing, 190° bending angle, 12” centerline bending radius, full hyd. clamping, 10’, 575V, S/N BL-7178, Schneider Magells programable PLC controls

PLATE ROLLS

2006 FW Faccin hyd. rolls, Mod. DP3, 8'x 8.5" dia., 10hp, Type 2021, s/n 06103058-3113 • Power rolls, 64"

(2) Ecco Hand rolls 3', Mod. X-3614

ANGLE ROLLS

2012 Durma PBH100, CNC hyd. profile angle rolls, s/n 410012157, 4” x 4” x ½” cap., 4.33” top shaft dia., (2) 3.94” planetary shaft dia., 12.4” roll dia., 0 – 26 FPM turning speed, hyd., ESA S530 CNC control, complete w/ extra dies & tooling

Curvatrici Mod. BS 50 profile angle rolls, Type H, 2” x 2” x ¼” cap.

DECOILER & SUPPORT

Ironside coil stock decoiler Mod. 10729, 6' cap., Hypertherm Powermax 35 plasma unit, Diversitech Mini-vac II fume extractor, vari-frequencey drive, pendant control

HD coil storage stands

Mussell 5 tonne under hook coil lifter

4 x 10’ roll-ball-top table

IRONWORKERS

2013 Edwards 75-ton hyd., 5"x5"x3/8 - 90 shearing cap., s/n 11937513A

2006 Fabmaster IW-66K, 66 ton, 4x4x5/16 - 90 shearing cap., hyd., s/n 360243

BANDSAWS

2012 Hydmech VW-18 Sem-Automatic Vertical Bandsaw, s/n JWA0312379B

2015 Ecco horizontal bandsaw Mod. W13185 w/ I/F & O/F rollcase

2001 Doall horizontal bandsaw C-9165,9” x 16” cap. w/ O/F rollcase

General 6.5, 90-040-MI vertical wood saw, 12”

LATHES

Modern Linmac lathe, taper, 680x2000 mm, gap, 3 & 4 jaw chucks, follow & steady, quick change tool post, Fagor 2-axis DRO, s/n 11212

2006 Modern lathe 14x36, 3 jaw, gap, steady rest, s/n 200604

MILLING MACHINES & SUPPORT

2014 Sharp Vertical Milling Machine Mod. 259HD401, S/N 10049, 72"x12" table, Mititoyo 3-Axis DRO

Modern Vertical Milling Machine Mod. YS-2VS-949, 50"x10" table, 3HP, Mititoyo 2-Axis DRO, S/N 070131

2004 Mill Drill Mod. 45, 9” x 31” table

2012 Ecco Mill Drill, Mod MD-930HL-3

(2) 6” machine vise

Inspection tools

SANDING & PIPE EQUIPMENT

Gallant Rotobelt, mod 1, 4? X 132? BELT – 7000 S.F.P.M.

Ridgid 1224 power threader

Ridgid 300-12 power threader

(2) Orbitalum GF4 pipe cutter/notcher

Almi AC150 pipe sander/notcher

Sharp pipe notcher Mod. PN-1505, 5hp

(21) Ridgid tri-stand

SHOP PRESSES

2013 Edwards 40-ton shop press w/shear attach.

50-ton hyd. shop press w/dies

COMPRESSORS

Ingersoll Rand Mod. IRN20H-TAS-HV 20hp screw air compressor, approx. 4,000 hrs., s/n CBV323838

Ingersoll Rand Mod. UP6-7.5TAS-125WD 7.5hp screw air compressor, 5,464 hrs., S/N CBV430806

Ingersoll Rand 1.5hp portable air compressor

WELDING EQUIPMENT & SUPPORT

(30) WELDERS

(4) Miller 350MP (1 BRAND NEW IN BOX)

Miller Millermatic 250MP Welder w/ Spoolmatic 30P Gun

Lincoln Electric power mig 350mp wire feed

(2) Miller Maxstar 280DX (NEW IN BOX)

(10) Miller Maxstar 210

(11) Miller Maxstar 200

Midwest CD100 stud welder

(8) Miller Maxstar 200 in need of repair

(18) Diversitech Fred Mini-Vac II fume extractor

Piranha III tungsten electrode grinder

TEST EQUIPMENT

Turbidity meter – 2016 Pentair Haffman VOS Rota Turbidity 90/25

Haffmans Nibem-TPH meter

Haffmans OPTI inline 02 meter, optihaze meter

Crystal Gauge Cal HP pressure comparator, 15000 PSI/1000 bar

Spectrovision 365 strobe light etc.

TANK HANDLING EQUIPMENT

(2) 2011 J Irizar tank turning roll set, 2.5-ton cap. w/idler, 150 – 3200 mm dia. cap.

(5) tank rotator systems - dual end rotation structure w/ gearmotors and elec. control

STEEL PLATE/COIL HANDLING EQUIPMENT

(2) 2018 Anver VPEI-Gen 2 vac pack, 1,500 lb. 20'x8' load

Anver VLS-08 vac lift, 10'x6' load, 300 lb.

Mussell 5 tonne coil lifter

Spreader bar - 12T x 27'

(2) Caldwell 2T x 12’ & 4’ spreader bar

Plate lifting clamps

OVERHEAD CRANES & SUPPORT

Mussell 5 tonne approx. 55’ span, top rail ride, underslung hoist, single girder, 6-way pendant control

Mussell 2 x 2 tonne gantry crane, 20’ span x 25’ long (dismantled), hoists sold separate

360 degree 15’ jib boom w/base, hoist sold separate

A-frame structure

(3) electric 2T hoist w/ pendant control

 

Sale held in conjunction with Joiner Sales Corp

DAY 1 - NSI NEWLANDS SYSTEMS & ACCENT STAINLESS STEEL MANUFACTURING - THE DME GROUP OF COMPANIES

Sale Date(s)
Venue Address
30731 Simpson Road
Units 501 - 505
Abbotsford
British Columbia
V1M 3L7
Canada

We are making things easier for you, auction specific shipping information coming soon. For now, please visit the Important Information / Terms & Conditions tab [next tab to the right] for auction specific removal dates, preferred vendors and more.

For general shipping information from the auctioneer please see below:

For Infinity Asset Solutions Inc delivery information please telephone 905-669-8893.

Important Information

Date & TIme:  Tuesday, February 26, 2019 at 10:00 am pst

Sale Location: Auction Center - 30731 Simpson Road, Units 5010 - 505, Abbotsford, BC

Inspection Date:  Monday February 25th, 9AM-4PM or By Appointment

Industry: Stainless Steel Vessel Fabrication & Engineering

Sales Tax: 12% 

18% Buyers Premium applies on all online purchases.  

 

 A $2000 refundable security deposit is required upon online registration.  See Terms & Conditions Below. 

 

Sale held in conjunction with Joiner Sales Corp

 

 

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Thursday, 8:00 AM EST – 10:00 PM EST
  • Friday, 8:00 AM EST – 6:30 PM EST 

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

Terms and Conditions

PAYMENT:

Full payment is required the day following sale by cash, debit, certified cheque, bank draft or credit card(to a maximum of $2000 on credit card). If the buyer wishes to pay by Bank draft or Wire transfer the full payment or deposit charged to buyer`s credit card will be refunded upon receipt of payment in full monies.

TAXES

All buyers are subject to GST 5% (UNLESS EXEMPTION # IS PROVIDED). Foreign buyers will be provided forms that can be sent to the appropriate Canadian Government authority for a refund.

REMOVAL: 

Removal of small non-installed items must be completed by by Sat., March 2nd, 2019. Removal of major items must be completed by by Tues., March 12th, 2019Joiner staff will be on site daily as needed, to facilitate removal.  Joiner Sales Corp will provide names of removal contractors as available and will co-operate to facilitate removal by the purchaser or agent. Cost and responsibility of removal remains with the purchaser.

No removal prior to payment in full. Purchaser shall be liable for any rent incurred or damages suffered by Joiner Sales Corp in the event that the purchaser fails to remove purchase(s)within time allotted or by damaging the premises during removal.  Purchaser or agent may be required to provide proof of adequate insurance prior to removing lots requiring dismantling, rigging or hot cutting. All descriptions are deemed to be correct, however, they are presented for guide purposes only. Prospective purchasers are encouraged to inspect all items prior to bidding. It should be noted that photos of items for sale may not fully display any or all faults. It is the buyer`s sole responsibility to satisfy(him/her)self as to the worthiness or fitness for use of each item bid on and to pay for such purchase(s).

All items are sold "as is, where is" with all faults and all sales are final.

FURTHER TERMS AND CONDITIONS OF SALE:

Each person participating in the Auction shall be bound by ALL of the following terms and conditions ("T&Cs"). Please be advised that these T&Cs are subject to amendments and modifications made solely by the Auctioneer at the time of Auction. On-line bidders are bound by the same terms and conditions as on-site bidders.

1. The listing catalog is meant merely as a guide. The Auctioneer believes the descriptions contained therein to be correct, but makes no warranty in connection therewith. Descriptions shall not be relied on for accuracy or completeness. Bidders/Buyers shall be deemed to have inspected all items sold at Auction ("Items") before bidding and to have relied solely on their own inspections and investigations. Auctioneer and seller shall not be liable for any inaccurate description of any Item or lot whether contained in a catalogue, advertisement or otherwise.

2. Items incorrectly described on the buyer’s invoice are subject to the “Errors & Omissions Excepted” abbreviation (E. & O. E.) at the bottom of auctioneer’s invoice and the auctioneer will not be held liable for such errors and omissions.  

3. The auctioneer reserves the right to refuse any applicant the privilege of bidding or attending the Auction and may revoke such privilege at any time. Bidder acknowledges and agrees that Bidder's paddles are non-transferable. All bids made by the holder of the paddle are the responsibility of the registered bidder.  A successful bid at Auction constitutes a legally binding contract of sale, subject to the T&Cs set forth herein.

4. All Items will be sold to the highest bidder conforming to the bid process, provided that Auctioneer reserves the right to sell Items by individual, group lots and "in bulk," as Auctioneer deems appropriate. Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneer's discretion, be immediately put up again and resold. Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the Clerk of Sale, shall in all cases be accepted by the bidder as final.

5. All sales shall be concluded as indicated by Auctioneer and no Bidder/Buyer may thereafter revoke his bid. Title shall not pass until payment in full of the purchase price is received.

6. All sales are FINAL. No refunds, returns, credits or exchanges.

All Items are sold on an "AS IS" " WHERE IS" AND "WITH ALL FAULTS BASIS" WITHOUT EXCEPTION and WITH REMOVAL AT BUYER'S SOLE RISK AND EXPENSE. THE AUCTIONEER AND SELLER MAKE NO REPRESENTATIONS, WARRANTIES, PROMISES, COVENANTS OR GUARANTEES OF ANY KIND, EXPRESSED OR IMPLIED, AS TO THE NATURE, QUALITY, DURABILITY, CAPABILITY, FUNCTION, PERFORMANCE, VALUE OR CONDITION OF THE ITEM(S) BEING AUCTIONED OR ITS SUITABILITY FOR ANY USE. THE AUCTIONEER AND SELLER EXPRESSLY AND SPECIFICALLY DISCLAIM, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

7. The balance of the purchase price less any deposit made, must be paid in full before or immediately after the conclusion of the Auction. All payments shall be made by way of cash, certified checks, letter of credit payable to Joiner Sales Corp, debit card or possibly credit card (credit cards not accepted at all sales). Deposits on account of purchases may be made in advance of the Auction and the balance thereof will be paid immediately after the Auction. Auctioneer reserves the right to put Items back up for auction if deposit is not received at or before the time of sale.

8. No Item shall be removed unless paid for in full and Items purchased shall be removed within the guidelines and terms stipulated. Buyer shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Buyers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased Items.

9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of Auctioneer, will be provided to the Buyer following the Auction or as soon thereafter as such documents are available.

10. Buyer may not assign, transfer or dispose of his rights in any Item purchased before payment of the purchase price in full.

11. Buyer shall pay all relevant taxes. All relevant taxes shall be Buyer's sole responsibility. 

12. Time is of the essence. If Buyer fails to make payment or remove Item(s) within the time periods provided herein, the Auctioneer may resell the Item(s) purchased by Auction, private contract or otherwise, as Auctioneer in his discretion deems advisable, and Buyer shall be liable for the shortfall and all costs, expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $4.00/sq. ft. per month) and commissions incurred for such resale.

13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Buyers are advised to prearrange for insurance coverage of their purchase. Title will revert to the Seller in the event Buyer does not remove Item(s) within the time specified.

14. If the Auctioneer is unable to deliver an Item sold to a Buyer due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse Buyer for all monies paid to the Auctioneer in respect of the Item and the Auctioneer shall have no further liability to Buyer arising from or relating to such loss, including without limitation, any damages or loss of profits.

15. Bidder acknowledges that the location at which the auction is held (the "Auction Site") is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the Auction shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the Auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.

 EQUIPMENT REMOVAL PROCEDURES / TERMS & CONDITIONS

Removal of small non-installed items must be completed by by Sat., Sept. 22nd, 2018. Final removal of major items must be completed by by Thurs., Sept. 27th, 2018. Joiner staff will be on site daily as needed, to facilitate removal.  Joiner Sales Corp will provide names of removal contractors as available and will co-operate to facilitate removal by the purchaser or agent. Cost and responsibility of removal remains with the purchaser.

The following are the controlling procedures and Terms and Conditions for the removal of Items purchased at a Joiner Sales Corp sale:

1. All invoices must be paid in full prior to removal of any Item. Each invoice must be marked "Paid in Full" and initialed by an authorized Joiner Sales Corp representative.

2. No business cards are to be placed on Items purchased until after they are sold and paid for in full.

3. All Buyers are solely responsible for the removal of Items purchased.

4. Buyers are responsible for, at their expense:

            (a) proper and safe disconnection and termination of all electrical, gas, water and/or air lines to machines as instructed or directed by an authorized Joiner Sales Corp representative;

            (b) shearing flush to the floor of all anchor bolts or fasteners;

            (c) erecting safety barriers around pits and holes in the floor created by removal of equipment until repaired (see next);

            (d) repair, in a first class, proper workmanlike manner, all holes in the floor or roof created by the removal of items purchased;                                                               

            (e) removing, off premises, all hazardous materials (including all contaminants) contained in Items purchased;          

            (f) repairing, in a first class, proper workmanlike manner, all damage caused to the premises by a Buyer, its representative or any other party hired by a Buyer for the removal of Items purchased;

            (g) leaving the work area in a clean, broom-swept condition;                      

            (h) any other specific terms and conditions communicated by Joiner Sales Corp before, during or after the Auction sale; (i) removal of Items purchased by the time and date set by Joiner Sales Corp before, during or after the Auction sale; and      

            (j) the safety of all of a Buyer's employees, agents or representatives including all movers/riggers hired by such buyer. 5. Prior to removal, all Buyers, or any movers or riggers hired by a Buyer, must provide to Joiner Sales Corp a certificate of insurance evidencing at least $1,000,000 in comprehensive liability insurance coverage (including workers compensation and automobile) per person, per occurrence.

6. Prior to removal, an authorized Joiner Sales Corp representative must examine and approve the removal of all Items purchased at the Auction. Such approval shall be indicated by this representative initialing all invoices.

7. No items shall be removed until after the Auction sale. Removal hours are weekdays only between 8:00 a.m. to 5:00 p.m. unless otherwise announced and agreed to by Joiner Sales Corp.

8. Buyers and their movers/riggers are jointly and severally liable for all damages, costs and expenses to the premises or any other assets which were caused by any of them, their employees, agents or representatives whether through negligence or otherwise. Buyer indemnifies and saves Joiner Sales Corp harmless from any and all costs, expenses and claims suffered or incurred by Joiner Sales Corp as a result of any act or omission of such buyer and/or any mover or rigger retained by a Buyer.  NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO JOINER SALES CORP’S SATISFACTION.

NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.

WE HOPE YOU WILL ENJOY OUR METHOD OF SALE AND THE OPPORTUNITIES OFFERED TO YOU AS A BUYER.

See Full Terms And Conditions