Refine your search

Estimate

Filter by Price Range

Auction Details

There are 55 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240

Results for live webcast and timed auctions may not have been verified by the auctioneer. If you are in any doubt of the accuracy of the prices provided, please call the auction house to confirm.

Lot 1

Rockwell Mod.3JR Hardness Tester- S/N 3JR3668, w/ weights

More details

Lot 2

Ro-Tap Sieve Shaker- w/ Sound Proof Enclosure, Approx. (10) No.200 Full Height Testing Sieves, 110 Volt

More details

Lot 3

12" Kalamazoo Disc Grinder-w/ Tilt Table, Vacuum Base, 1HP Baldor Motor,110/1/60

More details

Lot 4

12" Kalamazoo Disc Grinder-w/ Tilt Table, Vacuum Base, 1HP Baldor Motor,110/1/60

More details

Lot 5

12" Kalamazoo Disc Grinder-w/ Tilt Table, Vacuum Base, 1HP Baldor Motor,110/1/60

More details

Lot 6

Gardner Denver 5HP Horizontal Air Compressor

More details

Lot 7

Teledyne Pines Series 660-00 Tube & Rod End Finishing Machine- 7/16"-2" Cap, Asst. Tooling, 3/4HP AC Motor, 115/208-230/1/60

More details

Lot 8

Torrington Mod.211 2-Die Rotary Swager-3/16" Solid Work Cap., 1/2" Tubing Cap., 0.687"W x 0.937"H x 1.5"L Die Size, 0.687" W x 1.060"H x 1.5"L Bac...

More details

Lot 9

G & E 16" Universal Toolroom Shaper- complete with 15-200 SPM Cutting Speeds, .005-.091 Table Feeds, 7" Verical Head Movement, Vise, Swivel T-Slot...

More details

Lot 10

Mitsubishi Mod.HL-300 13" x 19.5" Geared Lathe-S/N273, 13.75" Actual Swing , Spindle Speeds 70-3200 RPM, Inch/Metric Threading, 1.375" Spindle Bor...

More details

Lot 11

Monarch Mod.16C 18.5" x 54" Geared Lathe- S/N 10167, Spindle Speeds 20-850 RPM, 1-3/4" Spindle Bore, (60) 2-120 TPI, Threading Dial, Taper Attachm...

More details

Lot 12

Clausing Colchester 15" x 50" Geared Head Lathe-S/N 6/0015/14813 , Spindle Speeds 25-2000 RPM, 15" Swing Over Bed, 9-1/2" Swing Over Cross-Slide,...

More details

Lot 13

P & W Mod.C 16" x 30" Geared Toolroom Lathe-Spindle Speeds 14-1000 RPM, 10" Swing over C/S, Threading 1-60 TPI, Taper, 4 Jaw Chuck, D1-6 Camlock S...

More details

Lot 14

Index Mod.645 1HP Vertical Milling Machine- Spindle Speeds 80-2700 RPM, 9" x 40" Table, Vise, 10" Cross Travel, 26" Longitudinal Travel, (8)Table ...

More details

Lot 15

Lagun Mod.FT-1 2 HP Vertical Milling Machine - S/N SE16899, Spindle Speeds 55-2940 RPM, 9" x 42" Table, Bijur Spraymist, Lube, R8 Spindle Taper, H...

More details

Lot 16

Bridgeport Series 1 2HP Milling Machine-S/N 12BR188798, Spindle Speeds 60-4200 RPM, 9" x 48" Table, Chrome Ways, Lube, 230/3/60

More details

Lot 17

Bridgeport Series 1 2HP Milling Machine- S/N 12BR197742, Spindle Speeds 80-4200 RPM, 9" x 42" Powerfeed Table, Digital Read-Out, Chrome Ways, AC M...

More details

Lot 18

6" Abwood Swivel Milling Vise

More details

Lot 19

6" Abwood Swivel Milling Vise

More details

Lot 20

Grieve Mod.AA500 Electric Oven- S/N 330408, 500 Degree Max Temp, 24" x 24" x 24" Chamber Dimension, 42" FB x 38"LR x 70"H Overall Dimensions, Blow...

More details

Lot 21

Clausing Mod. 5914 12" x 36" Vari-Speed Lathe- S/N 509170, Spindle Speeds 52-2000 RPM , 3 & 4 Jaw Chucks,Threading, 5C Collet Closer, Micro-Stop, ...

More details

Lot 22

Clausing Colchester 13" x 36" Geared Toolroom Lathe- S/N F3/50522, Spindle Speeds 40-1800 RPM ,Taper Attachment, 3 & 4 Jaw Chucks, Threading, Hard...

More details

Lot 23

KO Lee Mod.S618H2 6" x 18" 3-Axis Programmable Hyd/Manual Surface Grinder-S/N27646 (1994), 6" x 18" Surburban Magnetic Chuck, Vari Speed Hydraulic...

More details

Lot 24

Boyar Schultz Mod.H612 "Challenger" Hand Feed Surface Grinder-S/N 25720, 6" x 12" Magnetic Chuck, Dust Collector, Lube, 208-230/3/60 ...[more]

More details

Lot 25

Boyar Schultz Mod. H612 Hand Feed Surface Grinder-w/ Hanchette ElectroMagnetic Chuck, 208-230/3/60

More details

Lot 26

Elite Mod.75 Tool & Cutter Grinder-S/N 133, 4" x 32 1/2" Table, Powerfeed, Coolant, 220/3/60

More details

Lot 27

Verson Mod. T3-6 8' x 65 Ton Press Brake - S/N 4068, 8' x 10 Ga. Bending Cap., 96" Overall Bed & Ram Length, 78" btw Housings, Motorized Ram, Back...

More details

Lot 28

Large Amount of Press Brake Dies

More details

Lot 29

Wysong No.1296 8' x 12 Ga. Power Squaring Shear- S/N P2-150, Squaring Arm, (2) Support Arms, 24" Manual Back Gage, 5 HP AC Motor ...[more]

More details

Lot 30

Amada Mod. Pega 244 22 Ton Turret Punch-S/N AP440207 (2000),10 Ga. Capacity, 24 Station Thick Turret, (2) 1 1/4" Auto Index Stations, 40" X-Axis, ...

More details

Lot 31

Amada Mod. 344Q Pega 30 Ton CNC Turret Punch-S/N P3440090, 56 Station Thick Turret, 40" x 81" Table Size, 40" x40" Sheet Size, Auto Repositioning,...

More details

Lot 32

Koike-Aronson "Servograph BP-96" 8' x 10' CNC Plasma Cutter-Complete Retro-Fit 2010, Equipped with Thermal Dynamics Cutmaster 120A Plasma System,...

More details

Lot 33

ESAB Heath Oxy-Fuel CNC 8' x 20' Flame Cutter- S/N H52161, Burny 3 CNC Control, 3 Torch Stations, Equipped with (1) Oxy-Fuel Torch, Water Table

More details

Lot 34

LeBLOND "REGAL" SERVO-SHIFT 19" x 54" GEARED LATHE- S/N 12E-880(1984), 19-1/4" Actual Swing, 12-1/4" Swing Over Cross-Slide, Spindle Speeds 40-16...

More details

Lot 35

LeBlond Regal 32" x 192" Geared Lathe- S/N 3H-594,(24) Spindle Speeds 6-480 RPM, 24-1/4" Swing Over Bed, 2-3/16" Spindle Bore, (48) 2-112 TPI, T...

More details

Lot 36

LeBLOND "REGAL" SERVO-SHIFT 21" x 72" GEARED LATHE- S/N 6F793, 24" Actual Swing, 15" Swing Over Cross-Slide, Spindle Speeds 40-1600 RPM , 2 1/8" ...

More details

Lot 37

Ryman Engineering Mod.513 5" Motorized Abrasive Belt Grinder- S/N 179-5502, Mounted on Lathe Compound for Grinding Rolls

More details

Lot 38

Sheffield Cordax Mod.1808-MM 3-Axis Co-Ordinate Measuring Machine-S/N C899-5699, 80" x 25" x 20" Measuring Range; Asst. Renishaw Probes; G&L 3-Axi...

More details

Lot 39

14" Mitutoyo Mod. PH-3500 Optical Comparator-S/N 410180, 14" Screen Diameter, 17.7" x 5.7" Table Size, 100 Lb. Weight Capacity on Table, 10" Horiz...

More details

Lot 40

Hwacheon Mod.Hi-Tech 100B 2-Axis CNC Turning Center- New 2001, Spindle Speeds 30-7,000 RPM, 15.7" Swing over Bed, 11.8" Max. Turning Dia., 15.7" M...

More details

Lot 41

Methods Mod. Slant 50 2-Axis CNC Slant Bed Turning Center- S/N 94126 (1995), Spindle Speeds 35-3500 RPM, 19.68" Bed Swing, 12.99" Cross-Slide Swin...

More details

Lot 42

Kasto Mod. BBS 360/660U 26" x 14" x 157" Semi-Automatic Vertical Block Band Saw- S/N 6307-101-048(1995), 14" Work Height, 26" Throat, 157" Length,...

More details

Lot 43

Fadal Mod.4020HT Vertical Machining Center- New 1997, Spindle Speeds to 10,000 RPM, 48" x 20" Table Size, 40" X-Axis Travel, 20" Y-Axis Travel, 20...

More details

Lot 44

Bridgeport Series II Special 2HP Milling Machine-S/N 5088S , Spindle Speeds 60-4200 RPM, 11" x 58" Table, 1500# Table Cap., 33-1/2" Manual Longitu...

More details

Lot 45

Bridgeport Series II 4HP Vertical Milling Machine- S/N 5811 , Spindle Speeds 50-3500 RPM, 11" x 58" Working Table Surface, 30" Longitudinal Travel...

More details

Lot 46

Kent Mod. KGS-250AHD 8" x 18" Fully Automatic 3-Axis Hyd. Surface Grinder-S/N 87010103, 19" Max. Spindle to Table Top, 20" Longitudinal Travel, 10...

More details

Lot 47

Takisawa Mod. TSL-D-1000 14" x 39" Geared Head Lathe - S/N 800195, Spindle Speeds 55 to 1800 RPM, 8-1/4" Swing over Cross-Slide, Inch/Metric Threa...

More details

Lot 48

Forte Mod. SBA- 240 Automatic Horizontal Band Saw- S/N 2508, 9.4" Square & Round Cap, 15.7" Length, Automatic Feed, Coolant, 1" Blade, 6 HP AC Mot...

More details

Lot 49

Wells Mod. 8-M 8"x 16" Horizontal Band Saw- S/N 7974, 3/4 " Blade, 50-275 FPM, Work Vise, 1/2 HP AC Motor

More details

Lot 50

HARDINGE MOD. ASM-5C AUTOMATIC SECONDARY LATHE- S/N ASM5C-533, Spindle Speeds 250-4200 RPM, 8" Max. Distance btw Spindle Nose and Turret, Vertical...

More details

Lot 51

HARDINGE MOD. AHC AUTOMATIC CHUCKER- Spindle Speeds 125-3000 RPM, 1 1/16" Bar Capacity, 13" Swing, 9" Max. Distance btw Spindle Nose and Turret, 5...

More details

Lot 52

ARTOS TYPE CS6E AUTOMATIC WIRE STRIPPER & CUT OFF MACHINE - 10 GA. MAX STRANDED WIRE, 12 GA. WIRE SOLID, 1" - 194" LEAD LENGTH, 1"-1-1/25" STRIP L...

More details

Lot 53

KENSOL MOD. K-15 HOT STAMP FOIL MACHINE- S/N 1709, 325 WATT, 115/1/60

More details

Lot 54

Mazak Mod. V10N Vertical CNC Machining Center-S/N 51208 , Spindle Speeds 28-6,000 RPM, 48.8" x 19.7" Table Size, 40" X-Axis, 20" Y-Axis, 20" Z-Ax...

More details

Lot 55

Mazak Mod. V10N Vertical CNC Machining Center-S/N 50804 , Spindle Speeds 28-6,000 RPM, 48.8" x 19.7" Table Size, 40" X-Axis, 20" Y-Axis, 20" Z-Axi...

More details
Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240

Recently Viewed Lots