Refine your search
- List
- Grid
-
513 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Trench box 24' x 5 1/2' x 4'.
Trench box 24' x 5 1/2' x 4'.
8" x 8' spreader bars for trench boxes.
4'6" x 6' sprader bar and plate for trench boxes.
Trench box 24' x 6 x 4 x 1/2.
Trench box 24' x 6 x 4 x 1/2.
8" x 7' spreader bars and plate for trench box.
(7) 20' x 12" dewater well casings, (1) 20' x 12" PVC dewater well caseing.
22" X 10' long steel well casings for dewatering.
5.631 Lbs. - Total 5 Steel plates: (1) 6' x 6'4" x 1"; (1) 6' x 8' x 3/8"; (1) 7' x 7' x 3/8"; (1)
{ Choice of lots: 285 } 5.631 Lbs. - Total 5 Steel plates: (1) 6' x 6'4" x 1"; (1) 6' x 8' x 3/8"; (1) 7' x 7' x 3/8"; (1) 7' x 9' x 3/8"; (1) 8' ...
9,792 LBS: Total of (6) Misc. steel plates, 10' x 8' x 1/2" thick, square tube reinforced.
2,205 LBS - Total (4) Misc. steel plate. (1) 6 X 6 X 1/2"; (3) 3 X 8 X1/2".
3,060 LBS: Total of (2) Trench box end plates, 15' long x 5' wide x 1/2" thick, square tube reinforced.
{ Choice of lots: 289,290 (P) } 6,198 LBS: Total of (6) Steel plates, 4'6" x 4'6"x1 1/4".
{ Choice of lots: 289,290 (P) } 6198 LBS.: Total of (6) Steel plates, 4'6" x 4'6"x1 1/4".
14,462 LBS: Total of (14) Steel plates: 4'6" x 4'6"x 1 1/4".
27,306 LBS: Total of (18) Steel plates 8'6" x 3'6" x 1 1/4".
2,500 LBS: Total of (5) Misc. steel plate, (2) 3'6" x 3'6" x 1 1/4"; (3) Irregular shaped 1 1/4".
2,500 LBS: Total of (5) Misc. steel plate, (2) 3'6" x 3'6" x 1 1/4"; (3) Irregular shaped 1 1/4".
1990 Stone Miser pipe bedding box, with tandem rear wheels.
1985 GME pipe bedding box, with tandem rear wheels.
Caterpillar gen set, the engine is a 3304PC, s/n 02816015, arrangement #8M5750, SR4 generator s/n 5AA03433, arrangement #5N7078, 60 KW standby, 1,...
Grizzly 12'x3" Screen, sn 648.
Grizzley model 12G.3", stationary, 12' width, non vibratory stationary grizzly feeder, the grizzly bars appear to be in very good condition, purch...
Read Screen RD-90-B, sn 1082.
Portable screen plant, Read RD90B, s/n 1082, 3-cylinder air cooled Deutz diesel engine, rear single axle transport set up with a truck tractor 5th...
Plains State Belt uniloader w/bin, 30" belt w/25 T. bin, 11' unload height, 8' flatbelt, 24'
Plains State Belt uniloader, 30" belt w/25 T. bin, 11' unload height, 8' flatbelt, 24' length. Consists of two pieces, the first piece is a Friese...
Caterpillar 3408DT, generator, sn 78Z02168, hrs. 5,377, fuel tank, power panel, 400 KW, mounted in
Caterpillar gen set, SR4, s/n 6DA01203, arrangement #5N8666, 500 KVA, 400 KW, standby, 3-phase, 10-wire, Wye connector series, generator is 480 vo...
Caterpillar 3304 generator, sn 2B16015, fuel tank, power panel, 155 KW, mounted in enclosed semi
Caterpillar gen set, SR4, s/n 5EA07371, arrangement #4W-8968, rating 194 KVA, 155 KW, primary, 3-phase, 12-wire, 1992 year model, Wye, generator i...
Portable cold feed blending bin system, custom built, consisting of (2) hoppers that are approximately 20-24 yard capacity each, made of mild stee...
Power Screen, model MK Series II, portable screen plant, s/n 27-48-991, stationary grizzly, approximately 9' left/right and 5'6" front/back, feed ...
1977 Timpte trailer, vin 40419, 40' dry van trailer, Timpte, tandem axle, appears to be in fair to poor condition. It is not DOT compliant.
Pioneer, jaw crusher, 20"x36", sn KNW1400, mounted on a portable frame, 5'x20' pan feeder with grizzly, the apron and dies appear to be in good co...
Telesmith 48" cone crusher sn 202M7581, mounted on a tandem axle carrier, ID tag 1219-91-CRSH48, the mantle was replaced (2) years ago by Rexco Eq...
Masaba, s/n 96548, conveyor, radial stacker, self contained hydraulics, hydraulic raise/lower, single axle pull pin flange radial, single tires, t...
Kolberg radial stacker, s/n 719-85, 24X80, 24" belt, 80' length, radial stacker with pull pin radial flanges, self contained hydraulics, hydraulic...
Kolberg radial stacker, pull pin radial flanges, single tires, tires 9.00R20, lattice cord frame 28"x36", (19) idlers 30º, 24x60, 10 hp motor, 230...
Masaba 60' radial stacker, sn 2000982, 36" belt, single pull pin radial flanges with an expandable axle, manual raise/lower, manual radial propuls...
Roll of new 36" conveyor belt, New
Shop made 50' stacker conveyor, Portable stacking conveyor, manual raise/lower with approximately 4' of height range adjustment, lattice cord fram...
Shop made 50' stacker conveyor, Portable stacking conveyor, manual raise/lower with approximately 4' of height range adjustment, lattice cord fram...
Masaba stacking conveyor, non radial, manual raise/lower, (15) special idlers, each idler has (5) rollers, rectangular tube steel frame, the tube ...
Shop Built 30' stacker conveyor.
Shop Built 30' Stacking conveyor, channel frame, the frame is 8", overall width 48", (12) idlers, single axle carrier, manual raise/lower, tires ...
34' magnetic conveyor, 36" belt. 30" magnetic belt 6' long, fixed height 8'. Recycle belt and magnet, this unit was custom assembled, the magnet i...
Dewatering pipe, alum, lengths up to 30' w/various fittings.
1990 Vermeer return conveyor, 22' long, 24" belt, hydraulic.
Shop built 32' stacker conveyor, 24" belt.
1964 Bantam T350 crane, runs and operates.
Trailer mounted 800 gal. Fuel tank, with pump, hose.
Monroe Sno-Bully snow pusher, 12'.
Monroe Sno-Bully snow pusher, 10'.
Loading...-
513 item(s)/page