You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 756 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 13

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

ABAR VR-60x72 Vertical furnace, Sq. D motor control center. NOTE: the PLC has been removed, uniformity rack and stand, Pennwalt mechanical pump, ...

GM GM-HVF 701-XXB Horizontal Furnace, 480v/30/60hz, heating 700kva, motor and control 225kva, max. load 3500lbs. Max. temperature 2500F, temperatu...

Lot 3

CNC

K&T Milwaukee-Matic III 5x5, axis X:45", Y:64",Z:50" B:360degrees, A:90 degrees, GE Fanuc control center upgraded to Fanuc 15i-M in 2007. SAFTEY F...

Lot 4

CNC

FEMCO VL-12 Turntable, dia. 49.25", max. swing 63", max. turning dia. 63", table rpm 25-280rpm, 37kW main motor, Fanuc series 18-T control cente...

Flow International Corporation M2-4020b WaterJet High Pressure Cutting Machine, Date of Manufacture 10-2011, Touch Screen Control Console With Flo...

Betenbender Manufacturing 6' Sheet Metal Shear, Capacity 63/8. SN# 62689. Asset# RO-00000654. HIT# 2241798. Bldg. 29 Make It Lab/ Furnace Room (c...

(Lot of 1) Corrosion Resistant Lab Counter/Cabinets, 8' ft. x 24" in. d x 36" in. Tall (Contents Shown on/in Cabinets Are Not Included). HIT# ...

Cleveland Tramrail 2-Ton Capacity Overhead Bridge Crane, Approx. 46' ft. Span, Triple Rail Support With Electric 2-Ton Capacity Cable Hoist. Brid...

Cleveland Tramrail 5-Ton Capacity Overhead Bridge Crane, Approx. 46' ft. Span, Triple Rail Support With Electric 5-Ton Capacity Cable Hoist. Brid...

5-Ton Capacity Overhead Bridge Crane, Approx. 46' ft. Span, Triple Rail Support With Electric 5-Ton Capacity Cable Hoist. Bridge With Powered Fo...

5-Ton Capacity Overhead Bridge Crane, Approx. 46' ft. Span, Triple Rail Support With Electric 5-Ton Capacity Cable Hoist. Bridge With Powered Fo...

Accu-Louden 5-Ton Capacity Overhead Bridge Crane, Approx. 46' ft. Span, Triple Rail Support With P&H Heavy Lift Electric 5-Ton Capacity Cable Hoi...

5-Ton Capacity Overhead Bridge Crane, Approx. 46' ft. Span, Triple Rail Support With Electric 5-Ton Capacity Cable Hoist. Bridge With Powered Fo...

5-Ton Capacity Overhead Bridge Crane, Approx. 46' ft. Span, Triple Rail Support With CM Series 662 Electric 5-Ton Capacity Cable Hoist. Bridge W...

American Crane & Hoist Corporation 10-Ton Capacity Overhead Bridge Crane, Approx. 46' ft. Span x 12' ft. w, Two Side Rail Support With 10-Ton Cap...

American Crane & Hoist Corporation 10-Ton Capacity Overhead Bridge Crane, Approx. 46' ft. Span x 12' ft. w, Two Side Rail Support With 10-Ton Cap...

American Crane & Hoist Corporation 10-Ton Capacity Overhead Bridge Crane, Approx. 46' ft. Span x 12' ft. w, Two Side Rail Support With 10-Ton Cap...

American Crane & Hoist Corporation 10-Ton Capacity Overhead Bridge Crane, Approx. 46' ft. Span x 12' ft. w, Two Side Rail Support With 10-Ton Cap...

American Crane & Hoist Corporation 10-Ton Capacity Overhead Bridge Crane, Approx. 46' ft. Span x 12' ft. w, Two Side Rail Support With 10-Ton Cap...

Paint Spray Booth With Rear Exhaust, Approx. 14' ft. Wide x 13' ft. Height x 54" in. depth Workspace (94" in. Front to Back). HIT# 2241796. Bl...

Heavy Duty Airline GTF Engine Mount Test Stand & Structure For Series. HIT# 2241790. Bldg. 29 Machine Shop. Asset Located at 850 Lagoon Drive,...

Heavy Duty Airline Engine Mount Test Stand & Structure For KC-390 V2500. HIT# 2241791. Bldg. 29 Machine Shop. Asset Located at 850 Lagoon Driv...

Cincinnati 175 AS x 14 Ft. 175 Ton Autoshape CNC Forming Center Press Brake With Part Orientation Guide & System Controller. Max. Stroke 10" in., ...

Farnham 1506 H4X Contour Forming Roll Press Machine, 15 ft. Hydraulic Roll Ram Press, 60,000 psi Tensile Test To A Max. Radius of 3" in., Max. Rec...

Diversified Machine Systems 5T5-5-12-48TCOLRx 5-Axis Skin Router System, With Operator Workstation Controller, 10' ft. x 12' ft. Sliding Worktable...

Sheridan TC-L300/90-R CNC Stretch Forming Press Machine With DeMott Model 3423 CNC Controller Refurbishment, 18-Jaw Grips On Left & Right Side Ram...

Lot 127

Hardness Tester

Instron Wilson Rockwell 2002TB Hardness Tester, 150 kg Capacity With Pendant Controller. SN# C2886. Asset# RO-00003094. HIT# 2273804. Bldg 1 (Dept...

Lot 128

Hardness Tester

Wilson Rockwell 2002 Hardness Tester, 150 kg Capacity With Pendant Controller. SN# R2000P4632. Asset# 2006285. HIT# 2273805. Bldg 1 (Dept-26) Colu...

Williams-White 1,000 ton Capacity Hydraulic 4-Column Press, 8' ft. x 4' ft. Upper & Lower Platens. Asset# 2000047/2000048/2000049. HIT# 2273807....

Chambersburg Cecostamp Hydraulic Press With 42,500 ft/lbs Max. Energy, Omron-STI Access Safety Fence, Minimum Die: 68" x 42.5". SN# 10383-6. HIT#...

Yamazaki MAZAK Corporation FH-8800 4-Axis CNC Machine Center With 80-Tool, Tool Changer With Approx. 70 Tool Holder Collets & Cutter Tooling, Clea...

Fadal Engineering 907-1 VMC 8030HT CNC 88HS Vertical Machine Center With 22-Tool Rotary Turret With Assorted Tool Holders & Tooling, Chiller Tank,...

Lot 136A

Tooling Cabinet

Vidmar 7 drawer tool cabinet w/ contents, cutters, collets, clamps, handles used with Fadal CNC. HIT# 2275952. Bldg. 1, C-27. Asset Located at ...

Lot 136B

Tooling Cabinet

Vidmar 3 drawer tool cabinet W/ contents, bits, cutters, tooling, used with Fadal CNC. HIT# 2275953. Bldg. 1, C-27. Asset Located at 850 Lagoon...

Fadal Engineering 904-1 VMC 3016 CNC 88HS Vertical Machine Center With 22-Tool Rotary Turret With Assorted Tool Holders & Tooling, Chiller Tank, Y...

Lot 137A

Tooling

Lot: (1) two door 10 drawer cabinet w/ contents, drill bits, cutters, collets, includes other tooling not listed. (1) five drawer tooling cabine...

Clausing Colchester-21" Engine Lathe With Tool Holder Slide, Tailstock & (1ea) 15" in. 3-Jaw & 15.5" 4-Jaw Chucks, 20" in. Backplate. 8' ft. x 14"...

Hardinge HLV-H Super Precision Toolroom Lathe With 1.5-HP Drive Motor, Power Feed Tool Holder & Tailstock. 460V, 3-Ph, 60Hz. SN# HLV-H-14115-T. As...

Hardinge CHNC Series 7370 Super Precision Toolroom Lathe With 8-Station Tool Turret & Delta TAU Data Systems Workstation Controller. 460V, 3-Ph, 6...

Kearney & Trecker Marwin Limited Bridge 16 Heavy Duty Two Spindle CNC Bridge Mill With Hydraulic Pump, Coolant Pump/Recirculator, Approx. 6' ft. x...

Lagun FTV-2S Vertical Milling Machine, 3-HP Drive Motor, 2-Speed With Maxi Torque-Rite Drive Controller, 50" in. x 10" in. Table With Powerfeed, A...

Bridgeport Series-2 SPECIAL Vertical Milling Machine, 2-HP Drive Motor, 2-Speed With Sony Millman X-Y D.R.O. Unit, 11" in. x 58" in. Power Feed Ta...

Fadal Engineering 907-1 VMC 8030HT CNC 88HS Vertical Machine Center With 22-Tool Rotary Turret With Assorted Tool Holders & Tooling, Chiller Tank,...

Lot 144A

Tooling Cabinet

Vidmar 3 drawer cabinet and contents, collet holders. PLEASE INSPECT. HIT# 2275991. Bldg. 1, C-29. Asset Located at 850 Lagoon Drive, Chula Vis...

Lot 144B

Tooling Cabinet

Vidmar 10 drawer cabinet with contents, cutters, holders, bolts, washers, other items included but not listed. PLEASE INSPECT. HIT# 2275992. Bl...

Fosdick 4-Spindle Inline Drill Press, 1.5-HP Each Spindle, RPM Settings: 110/225/325/650/900/1800, 62" in. x 24" in. Table. 208-220/440V. Asset#...

Kearney & Trecker Marwin Limited Heavy Duty Four Spindle CNC Bridge Mill With Hydraulic Pump, Coolant Pump/Recirculator, Approx. 6' ft. x 12.5' f...

Wysong 10' ft. / 10-HP Powered Sheet Metal Shear. 460V, 3-Ph, 60Hz. Asset# RO-00002204. HIT# 2273823. Bldg 1 (Dept-73 Maintenance. Shop) Colum A...

Chicago 1218 12' ft. Manual Steel Bending Brake. 18 Ga. Max. SN# 8760. HIT# 2273824. Bldg 1 (Dept-73 Maintenance. Shop) Colum Asset Located at 85...

Whitney-Jensen 412 4' ft. Manual Steel Bending Brake. SN# 245-963. HIT# 2273825. Bldg 1 (Dept-73 Maintenance. Shop) Colum Asset Located at 850 La...

Chicago L-31 4' ft. Manual Steel Finger Brake. SN# 112909. HIT# 2273826. Bldg 1 (Dept-73 Maintenance. Shop) Colum Asset Located at 850 Lagoon Dri...

Roper Whitney 18-C 18-Station Manual Turret Press. SN# 433097. Asset# 2003519. HIT# 2273827. Bldg 1 (Dept-73 Maintenance. Shop) Colum Asset Locate...

Do-All 26-3 Contour-Matic 26" in. Vertical Band Saw With 26" Throat, 32" in. x 41" in. Table, Butt Welder, Band Length Max. 186", 440V, 3-Ph, 60Hz...

Yates American Machine Co. Heavy Duty Vertical Band Saw With 35" Throat, 36" in. x 36" in. Table, Including 9' ft. x 8' ft. Wooden Extension Tabl...

DeWalt Approx. 15" in. Radial Arm Saw With Approx. 24" in. Cut Depth. Includes 1-HP 55-Gallon Capacity Dust Collector Vacuum System. HIT# 22738...

Acme Machine & Tool Heavy Duty Table Saw With 12" Blade, 48" in. x 38" in. Table. Including 1-HP 55-Gallon Capacity Dust Collector Vacuum System ...

Hammond Machinery Heavy Duty Table Saw With 10" Blade, 36" in. x 27" in. Table. Including 1-HP 55-Gallon Capacity Dust Collector Vacuum System & ...

Buffalo Forge Co. Heavy Duty Vertical Floor Type Drill Press With 22" in. x 23" in. Table. HIT# 2273833. Bldg 1 (Dept-73 Maintenance. Shop) Col...

Master 24" in. Heavy Duty Disc Sander/Grinder. HIT# 2273834. Bldg 1 (Dept-73 Maintenance. Shop) Colum Asset Located at 850 Lagoon Drive, Chula ...

Summit Machine Tool Manufacturing Corp. 3 XHD Heavy Duty Floor Model Drill Press With Approx. 17" x 17" in. Adjustable Table. SN# 1289/190. Asset#...

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240
Page of 13

Recently Viewed Lots