John Gillen Company - Featuring Screw Machines & More!
Auction Date: lots start closing on Thursday, February 13th at 10:00 am CST
Location: 2450 South 50th Avenue, Cicero, IL
Preview: February 12th from 9:00 am to 3:00 pm
National Acme Screw Machines & Attachments
Acme Gridley 1-5/8” 6 Spindle Model RB-6 Automatic Screw Machine, s/n 41707, Threading Attachment, Bar Feed
Acme Gridley 1” 6 Spindle Model RAN-6 Automatic Screw Machine, s/n B-23662-N, Threading Attachment, Bar Feed
Thread Rolling Attachment*Threading Attachment*Gears*Cams*Etc.
Davenport Screw Machines & Attachments
Davenport 3/4” Model B Long Bed 5 Spindle Automatic Screw Machine, s/n 12979L, Slotting/Milling Attachment, Pick-Off, Noise-Tamer Enclosure, Qucchi Automatic Bar Feed Loader, s/n 92DA608 with Control
Davenport 3/4” Model B 5 Spindle Automatic Screw Machine, s/n 12963, Noise-Tamer Enclosure, Threading Attachment, Back Finish, Bar Feed
Davenport 3/4” Model B 5 Spindle Automatic Screw Machine, s/n 10767, Threading Attachment, Pick-Off, 4th Position Slide, Bar Feed
Davenport 3/4” Model B 5 Spindle Automatic Screw Machine, s/n 9707, Threading Attachment, Pick-Off, 4th Position Slide, Bar Feed
Davenport 3/4” Model B 5 Spindle Automatic Screw Machine, s/n 8327, Pick-Off, 4th Position Slide, Bar Feed
2 – 4th Position Cross Drilling Attachments*3rd Position Slide*Gears*Cams*Etc
CNC Screw Machines
Tornos Bechler Model ENC162 CNC Screw Machine, s/n 58686 & 58697 (Parts Machine), 6-Slides, GE Fanuc O-T Control
Brown & Sharpe Screw Machines
Brown & Sharpe 1-5/8” No. 2 Ultramatic Automatic Screw Machine, s/n 542-2-7816, Vertical Slide
Brown & Sharpe 3/4” No. 2 Automatic Screw Machine, s/n 542-2-5951, 2 Vertical Slides, 2 Speed
2 – Brown & Sharpe 1/2” No.00 Push Button Automatic Screw Machines, s/n 542-00-5777 & 542-00-5304, Vertical Slide
Traub Screw Machines
Traub Model A-42 Screw Machine, s/n A42/3658
9 – Traub Model A-15 Screw Machines, s/n 15/02635, 15/04910/4, 15/05396, 15/05524/4, 15/03147, 15/05153/4, 15/04866/6, 15/04915/4 & 15/16594
Lipe Magazine Loading Bar Feeds
Lipe Model 100-AML Bar Feed, s/n 7218
Lipe Model 87-AML Bar Feed, s/n 5552
2 – Lipe Model 62-AML Bar Feeds, s/n 11290 & 9425
Lipe Model 56-AML Bar Feed, s/n 6008
Ty Miles 12 Ton Model MBLD24-48-120R Vertical Hydraulic Broach, s/n 960310, 48” Stroke
Colonial Broach 8 Ton Model RS8-54 Vertical Hydraulic, 54” Stroke
Oilgear 6 Ton Model XS-6X30 Vertical Hydraulic Broach, s/n 49631, 30” Stroke
Detroit 5 Ton Model VS-5-30-6 Vertical Hydraulic Broach, S/N M-73996, 30” Stroke
Saws & Cut-Offs
Fenn 5/8” Model 62 Impact Hydraulic Automatic Cut-Off Machine, s/n 52737, with Stock Feed
DoAll 13”x13” Model C-3300NC Programmable Automatic Feed Horizontal Band Saw, s/n 521-96157
Ramco Model RS-90P Horizontal Band Saw. s/n 01052
Grinders & Accessories
Blanchard 36” No. 18 Rotary Surface Grinder, s/n 10728, with Segmented Grinding Wheel
Lapointe 36” Broach Grinder, s/n 52161, with 30” Tilting Magnetic Chuck
5 – Cincinnati No. 2 Centerless Grinders, s/n 2M2H5A-430, 2M2H1L-1191, & N/A, 1-Hydraulic Wheel Dresser, 1-Manual Wheel Dresser
Brown & Sharpe 6”x18” Model Micromaster Hydraulic Surface Grinder, s/n 523-6181-2723, with Electro Magnetic Chuck
Gallmeyer & Livingston 6”x18” Model 350 Hydraulic Surface Grinder, s/n 350488, with Electro Magnetic Chuck
DoAll 6”x18” Model D6-1 Surface Grinder, s/n 39611093, with Permanent Magnetic Chuck
Harig 6”x12” Ballway Surface Grinder, s/n B-18330, with Permanent Magnetic Chuck
Boyar Schultz 6”x12” Deluxe Surface Grinder, s/n 3417H, with Permanent Magnetic Chuck
Norton Tool & Cutter Grinder, s/n 6319
Agathon Double End Carbide Tool Grinder
Hager Double End Carbide Tool Grinder
Magna-Lock 12”x60” Electro Magnetic Chuck with Control
Leblond 16”x54” Servo-Shift Toolroom Lathe, s/n 10C329,1800 Spindle RPM, with 3-Jaw Chuck, Steady Rest, Inch/MM Threading
Kent 3 HP Model KTM-3VK CNC Variable Speed Ram Type Vertical Mill, s/n 845510, 48” Table, Power Draw Bar, Analim Control
Sharp Variable Speed Ram Type Vertical Mill, s/n 84110638, 48” Power Feed Table, with Power Draw Bar, Sony DRO
Powermatic Variable Speed Model 1200 Drill, s/n V920881, with Production Work Table
South Bend 10”x24” Cabinet Base Lathe, s/n 16322RKL16, with Chuck, Collets
Ramco 55 Ton Model RP55 H-Frame Hydraulic Shop Press, 30” Between Frames
Snow Model DR-1-A Drill, s/n 354697
Bohle Model FW75 Programmable Horizontal Production Mill, s/n 75025, with 5 – Table Mounted Kurt Vises
Cincinnati Simplex Production Mill, s/n 31121H74-0008
5 – Sundstrand No.1 Production Mills, s/n 41-927, 31-2000, 31-1358, 31-928, & 31-693
2 – Sundstrand No. 0 Production Mills, s/n 40-1137 & 40-566
Ultra-Matic Automatic Deburring System Consisting of Inclined Parts Feeding Conveyor, 48” Vibratory Bowl Type Vibratory Finishing Mill, Magnetic Extracting Parts Conveyor
RMG .200”-.500” Model SB-KS1207-02 Double Plane Stock Straightener, s/n 9304339
Minster 32 Ton No. 4 OBI Press, s/n 4-12764, with Air Clutch
Littell 4,000LB. Model 40-12 Single End Stock Uncoiler, s/n 88535-86
Denison Multipress 6 Ton Hydraulic C-Frame Hydraulic Press, s/n 26280
Waterbury Farrel Horizontal Thread Roller
4’x8’ Bridge Type Router, s/n 0408-V6-0901 (No Computer)
2 – Patterson Wire Straightener & Cut-Off Machines
Assorted Parts Deburring Machines
Enerpac 10000 PSI Hydraulic Pump Unit, 12.5 HP
Starrett 16” Model HE400 Optical Comparator with Quadra-Chek 2000 Readout
Clark Model MDT8 Digital Rockwell Hardness Tester, s/n 85DT408M
Wilson Model ACC-8708 Rockwell Hardness Tester
Chip Washers & Sump Retreiver
Master Chemical Model Yellow Bellied Sump Sucker, s/n 4658
Barrett 17” Chip Wringer with Clarifuge, s/n 1251698, Extra Basket
McKenzie Chip Washer with Hopper, s/n L-2474
Nobles Parts Spinner
Manor 10” Model JS-550B14 Pass Thru Parts Washer, s/n 1184
Toyota 4.900 LB. Model 42-6FGCU25 LP Gas Forklift Truck, s/n 68433, 189” Max. Lift, Side Shift, 7700 Hours on Meter
Toyota 3,500 LB. Model 426FGCU18 LP Gas Forklift Truck, s/n 62646, 171” Max. Lift, 4100 Hours on Meter
Kalmar 3,500 LB. Model C40 LP Gas Forklift Truck, 172” Max. Lift
Large Quantity Steel Bar Stock
Ingersoll-Rand 50 HP Model SSR-E-50SE Screw Type Air Compressor, s/n 66015U97202
Sullair 50 HP Model 12BS-50H-ACAC Screw Type Air Compressor, s/n 0037804, 6591 Hours on Meter
Sullair 25 HP Model 10-25 Screw Type Air Compressor, s/n 00391247
10 HP “Y-Type” Tank Mounted Air Compressor
Corty Model 3100A Pressure Washer*Assorted Tooling*Inspection*Offices Etc.
1979 GMC Model 6000 V-8 Flat Bed Truck, VIN: T16DA9V615595, Manual Transmission, 12’ Steel Deck, Approx. 86,000 Miles on Odometer
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Thursday, 8:00 AM EST – 10:00 PM EST
- Friday, 8:00 AM EST – 6:30 PM EST
Office: (253) 858-6777 Toll Free: (866) 597-2437
Frequently Asked Questions
Please note our deposit requirements for bidders with no bidspotter bidder history or bidder history with any negative feedback:
Insufficient Bidspotter history
Due to your insufficient Bidspotter history we may require a deposit up to $500.00 USD (refundable) before you can be approved to bid. By registering to bid for this sale, you are giving us the right to pre-authorize a deposit of $500.00 USD. This pre-authorization is immediately refundable if you do not purchase anything, or if you choose to make other payment arrangements. Once you have established a sufficient positive Bidspotter history you will not have to deposit in order to get approved.
Bidspotter history with negative feedback
Due to your Bidspotter history we will require a $2,500.00 USD deposit (refundable) before you can be approved to bid. By registering to bid for this sale, you are giving us the right to pre-authorize a deposit of $2,500.00 USD. This pre-authorization is immediately refundable if you do not purchase anything, or if you choose to make other payment arrangements. Once you have established a sufficient positive Bidspotter history you will not have to deposit in order to get approved.
Everything will be sold to the highest bidders for cash, in accordance with our standard Terms of Sale which can be found on our web site at www.heathindustrial.com or by requesting a copy of our terms and conditions of sale by email to email@example.com.
Your bid is a contract: Place a bid only if you are serious about buying the item. If you are the high bidder, you will enter into a legally binding contract with Heath Industrial. All bids are in US dollars.
A Buyers Premium will be added to all items sold. Heath Industrial makes every attempt to accurately describe all items at the auction sale, there are always possibilities of errors occurring which is out of our control. It is important to know this fact if you plan on placing a Proxy Bid or if you plan on bidding via bidspotter.com.
Please inspect before you bid and remember, everything is sold AS IS, WHERE IS with absolutely no warranty or guarantee of any kind, either written or implied.
Payments can be via company check, cash, or wire transfer. Credit Cards are accepted for an additional fee. All successful bidders will receive their invoices via email from Heath Industrial after the last day of the auction sale.
All successful bidders will be responsible for sales taxes which may be added to your invoice unless an exemption certificate is supplied prior to invoicing.
Heath Industrial reserves the right to automatically charge payment card on file with bidspotter.com, for any and all outstanding invoices not paid within 48 hours after the close of the auction.
Rigging and removal is the responsibility of the buyer. Small items that can be carried out should be removed immediately after the auction or at the latest, the day after the auction. All riggers or buyers who will be removing items using any powered vehicle will need to provide a certificate of insurance that is acceptable to Heath Industrial. Removal will begin when the auction sale has been completed and payment in full has been received.
If you need assistance please call us at our corporate offices @ 847-380-1755 or via email at firstname.lastname@example.org