MTS Rotary Labeler, Model: Cantech R-32, S/N: 296 with Hot Melt Applicator - Rigging Fee: $3,000

MTS Rotary Labeler, Model: Cantech R-32, S/N: 295 with Hot Melt Applicator - Rigging Fee: $3,000

INSPX S/S X-Ray System, Model: 430 with Reject Table - Rigging Fee: $1,250

Zambelli Packaging 3-Lane Belt Accumulation Table with (3) Belts: 40' x 20" and Drives - Rigging Fee: $2,500

Zambelli Tray Overwrapper with Shrink Tunnel, Model: LFT90/V, S/N: 4609 and Hot Melt Glue - Rigging Fee: $4,000

HK Systems Belt Conveyor, Including: Straight Section, Inclined Section: 60", (2) 90° Turns and Belt: 40' x 12" - Rigging Fee: $2,200

Belt Conveyor: 36" x 15", 80" x 18", 13' x 10" with Drives - Rigging Fee: $1,200

Alvey Roller Conveyor: 25' x 12" with Adjustable Rails - Rigging Fee: $750

Belt Conveyor: 120" x 12" with Drive - Rigging Fee: $750

Alvey Case Palletizer, Model: 680, S/N: 01-EK8L116 with Pallet Dispenser - Rigging Fee: $9,500

Samuel Pallet Wrapper, Model: SRR650, S/N: 650-1108041615 with Caged Control Panel - Rigging Fee: $4,500

Hydraulic Pallet Stacker with Hydraulic Power Pack with Oil Surge Tank and Control Panel - Rigging Fee: $1,250

Sections: Powered Roller Conveyor: 45' x 52" Overall and Drives - Rigging Fee: $2,200

800 Gallon S/S Insulated Dome-Top, Dish-Bottom Vertical Mix Tank with Top Manway - Rigging Fee: $1,250

300 Gallon S/S Jacketed Dome-Top, Cone-Bottom Vertical Mix Tank with Vertical Agitation and Top Manway - Rigging Fee: $1,000

Feldmeier 500 Gallon S/S Dome-Top, Dish-Bottom Vertical Mix Tank, S/N: E-876-08 with Vertical Agitation and Top Manway - Rigging Fee: $1,250

Feldmeier 300 Gallon S/S Dome-Top, Dish-Bottom Vertical Mix Tank, S/N: E-867-08 with Vertical Agitation - Rigging Fee: $1,000

Feldmeier 200 Gallon S/S Dome-Top, Dish-Bottom Vertical Tank, S/N: E-1348-06 - Rigging Fee: $1,000

Feldmeier S/S Hydraulic Tote Dumper with Tank - Rigging Fee: $1,250

Feldmeier S/S Hydraulic Tote Dumper, S/N: E-0378-09 with Tank - Rigging Fee: $1,250

Feldmeier S/S Hydraulic Tote Dumper with Tank - Rigging Fee: $1,250

Feldmeier S/S Tote Dumper with Tank - Rigging Fee: $1,250

APV Crepaco S/S Plate Heat Exchanger, Model: R5ITH with (150) Plates - Rigging Fee: $1,500

APV Crepaco S/S Plate Heat Exchanger, Model: CR5HYD55, S/N: 24453 with Integral Hydraulic Tightening System and (150) Plates - Rigging Fee: $1,750

Sigma S/S Plate Heat Exchanger, Model: 90VSAV, S/N: PA72081 with High Pressure Tie-Bolt Frame and (120) Plates - Rigging Fee: $1,500

APV Crepaco S/S Plate Heat Exchanger, Model: R5ITH, S/N: 31767 with (48) Plates - Rigging Fee: $1,500

TACO Skidded Hot Water Set, S/N: D09453 with TACO Shell & Tube Heat Exchanger: 12” 48”, 10 HP 3,450 RPM Circulating Pump, Steam Trap and Less Stea...

Skidded Hot Water Set, S/N: 96B78236-01 with Shell & Tube Heat Exchanger: 60” x 12”, Recirculating Pump and Steam Valves - Rigging Fee: $400

Shell & Tube Heat Exchanger: 8” x 48” with I-Line S/S Fittings - Rigging Fee: $200

Anderson Pressure Transmitter, Model: SR066A00501100, S/N: 1124997, CAL Range 0-30 PSIG, 2" Tri-Clamp Connection with 6” S/S Fittings and Clamps -...

S/S Incline Auger with Integral S/S Auger: 120” Length x 12" Diameter, Top Mounted S/S Auger: 72: x 60” x 30” with Drive Unit - Rigging Fee: $1,250

Merrick S/S Powder Hopper with Vibratory Feeder and Gate Valve - Rigging Fee: $200

Merrick S/S Powder Hopper with Vibratory Feeder and Gate Valve - Rigging Fee: $200

Merrick S/S Powder Hopper with Vibratory Feeder and Gate Valve - Rigging Fee: $200

Merrick S/S Powder Hopper with Vibratory Feeder and Gate Valve - Rigging Fee: $200

Hayes and Stolz S/S Ribbon Conveyor: 8’ Length with (2) REMBE GmbH Safety+Control Filter Units and Baldor 3 HP 1,760 RPM Motor - Rigging Fee: $500

Hayes and Stolz S/S Ribbon Conveyor: 8’ Length with Baldor 3 HP 1,760 RPM Motor - Rigging Fee: $500

Air Pro Fan Unit, Model: BIHS 122-105, S/N: 1672 - Rigging Fee: $200

New York Blower Company Fan Unit, Model: 153-40F - Rigging Fee: $200

Tranter Painted Frame Plate Heat Exchanger - Rigging Fee: $150

ABS S/S Chopper - Rigging Fee: $150

SPX Positive Displacement Pump, Model: 13001 with Baldor 10 HP Motor: Mounted on S/S Base - Rigging Fee: $350

Assorted Positive Pump, Motor, Gear Reducing Drives and Bases - Rigging Fee: $500

S/S Powder Mixer and Stand - Rigging Fee: $150

Fike Explosion Proof Pressure Tanks and Controls - Rigging Fee: $100

Emulsifier (Parts Machine) - Rigging Fee: $250

S/S Frame Weight Belt: 60” Length - Rigging Fee: $250

API Schmidt S/S Plate Heat Exchanger - Rigging Fee: $1,500

Nash Vacuum Pump with Siemens 3.5 KV Motor - Rigging Fee: $250

S/S Frame Platform: 84” x 30” with Grating and Stairs - Rigging Fee: $200

Arrowhead Painted Frame Product Conveyor: 138” x 18” with 90° Turn and Drive - Rigging Fee: $250

Assorted S/S Frame Product Conveyor Sections, Straight Runs, Painted Frame Sections and Power Belt Conveyor - Rigging Fee: $500

Dual Lane S/S Frame Product Conveyor: 211” x 17” with 90° Turn - Rigging Fee: $350

Assorted MK and other S/S Frame Product Conveyor Sections - Rigging Fee: $500

Sections: Clean Move S/S Frame Inclined Product Conveyors: 105” x 12" with (1) Drive - Rigging Fee: $250

Assorted S/S Frame Product Conveyor Sections and Roller Conveyor Sections - Rigging Fee: $500

Assorted Conveyor Sections with (2) 45° Turns - Rigging Fee: $500

50’+ Assorted S/S Straight Product Conveyor Sections on Skid - Rigging Fee: $350

Assorted Arrowhead and other S/S Frame Product Conveyor Sections on Skid - Rigging Fee: $400