5-Port S/S Flowverter Stations with End Caps, Clamps and (2) Jumpers - Rigging Fee: $150

Anderson AJ-300 Chart Recorder - Rigging Fee: $100

Anderson AJ-300 Chart Recorder - Rigging Fee: $100

Assorted S/S Air Valves (This Room Only) - Rigging Fee: $140

S/S Piping: 160’+, Fittings and Clamps - Rigging Fee: $250 ...[more]

Hot Water Station with Hose, Nozzle, Filter and Valves - Rigging Fee: $100

Hope Industrial Touch Screen HMI with Keyboard and S/S Enclosure - Rigging Fee: $250

(4) 4-Port S/S Flowverters with End Caps, Clamps and (5) Jumpers - Rigging Fee: $600

Walker 10,000 Gallon Jacketed 316 S/S Silo: 121” O/D, Model: VSHT, S/N: SPG-28846 with Vertical Agitation, Sensors and Gauge - Rigging Fee: $7,500

APV S/S Tank Valves - Rigging Fee: $200

Walker 10,000 Gallon Jacketed 316 S/S Silo: 121” O/D, Model: VSHT, S/N: SPG-28847 with Vertical Agitation, Sensors and Gauge - Rigging Fee: $7,500

APV S/S Tank Valves - Rigging Fee: $200

Anderson AJ-300 Chart Recorder - Rigging Fee: $200

Allen-Bradley PLC with (3) I/O Cards, Festo Valve Manifold, (2) Festo Pneumatic Valves and S/S Enclosure - Rigging Fee: $200

Ampco Centrifugal Pump, Model: SP220-250TC, S/N: 2046706-5-1 with Baldor 15 HP 1,765 RPM Motor: Mounted on S/S Base - Rigging Fee: $150

Fristam Centrifugal Pump, Model: FPX712-100, S/N: FPX1722102046 with Weg 2 HP 3,475 RPM Motor: Mounted on S/S Base - Rigging Fee: $150

Hot Water Station with Hose, Nozzle, Filter and Valves - Rigging Fee: $100

S/S Piping: 175’+, Fittings and Clamps (This Room Only) - Rigging Fee: $300 ...[more]

Ampco Positive Displacement Pump, Model: ZP3-130, S/N: 2046663-5-1 with Baldor 5 HP 1,750 RPM Motor, Alfa Laval S/S Air Valve with Control Top and...

9-Port S/S Flowverter Stations with End Caps, Clamps and (2) Jumpers - Rigging Fee: $300

Alfa Laval S/S Air Valves in Manifold with Control Tops and S/S Rack - Rigging Fee: $210

Ampco Positive Displacement Pump, Model: ZP3-018, S/N: 2164911-5-2 with Baldor 2 HP 1,755 RPM Motor, Alfa Laval S/S Air Valve with Control Top and...

Alfa Laval S/S Air Valves with Control Tops in Manifold: Mounted on S/S Rack with Endress+Hauser Cerabar M Pressure Gauge - Rigging Fee: $375 ......

Alfa Laval S/S Air Valves with Control Tops in Manifold: Mounted on S/S Rack with Endress+Hauser Cerabar M Pressure Gauge - Rigging Fee: $375 ......

BULK BID (Lots 332-338B): 3-Tank CIP System with (2) 1,000 Gallon Walker APV 1,200 Gallon S/S Tanks Shell & Tube Heat Exchangers, Pumps, Controls,...

Walker 1,000 Gallon Dome-Top Dish-Bottom 316L S/S Tank, Model: PZ-SP, S/N: 8758 with Level Sensor (Subject to BULK BID: Lot 331) - Rigging Fee: $1...

Walker 1,000 Gallon Dome-Top Dish-Bottom 316L S/S Tank, Model: PZ-SP, S/N: 8759 with Level Sensor (Subject to BULK BID: Lot 331) - Rigging Fee: $1...

APV 1,200 Gallon Dome-Top Cone-Bottom Jacketed 316L S/S Tank, S/N: K-2138 with Level Sensor (Subject to BULK BID: Lot 331) - Rigging Fee: $1,500

(2) Enerquip 7' S/S Shell & Tube Heat Exchangers with Steam Valves and S/S Rack (Subject to BULK BID: Lot 331) - Rigging Fee: $750 ...[more]

Alfa Laval Centrifugal Pump with Baldor 7.5 HP 3,520 RPM Motor and SEW 7.5 HP 3,520 RPM Motor (Subject to BULK BID: Lot 331) - Rigging Fee: $150

Hope Industrial Touch Screen HMI with S/S Enclosure (Subject to BULK BID: Lot 331) - Rigging Fee: $250

(2) Anderson AJ-300 Chart Recorders (Subject to BULK BID: Lot 331) - Rigging Fee: $200

(22) Assorted S/S Valves, Including: Air, Air Actuated, Check and Butterfly Valves (CIP System Only) (Subject to BULK BID: Lot 331) - Rigging Fee:...

S/S Piping: 100’+, Fittings and Clamps (CIP System Only) (Subject to BULK BID: Lot 331) - Rigging Fee: $300 ...[more]

RMC Boot Sanitizer, Model: F-29 - Rigging Fee: $1,500

S/S Hand Sink with Foot Controls - Rigging Fee: $150

Hot Water Station with Hose, Filter and Valves - Rigging Fee: $100

Allen-Bradley PLC with Ethernet/IP and Bihl+Wiedemann AS-Interface Master Cards, PLC with (8) I/O Cards, (2) SMC Valve Manifolds and S/S Enclosure...

S/S Brush Racks - Rigging Fee: $50

Bradley Eye Wash and Shower Station - Rigging Fee: $100

S/S Piping: 500’+, Fittings and Clamps - Rigging Fee: $1,250 ...[more]

S/S Check Valves (This Room Only CIP Not Included) - Rigging Fee: $385

S/S Insulated Sliding Door: 110" x 76" - Rigging Fee: $750 ...[more]

Bradley Eye Wash and Shower Station - Rigging Fee: $100

(2) LMI Dosing Pumps, (3) Poly Diaphragm Pumps, S/S Wall Mounted Shelf: 56" x 1’, Valves and Piping - Rigging Fee: $125 ...[more]

S/S Insulated Sliding Door: 110" x 76" - Rigging Fee: $750 ...[more]

2008 Walker 30,000 Gallon Jacketed 316L S/S Silo, Model: VSHT, S/N: WEP-68958 with Horizontal Agitation, Sensor and Gauge - Rigging Fee: $10,000

Tuchenhagen 316L S/S Tank Valves with Control Tops (For Lot 351) - Rigging Fee: $200

Tuchenhagen 316L S/S Tank Valves with Control Tops (For Lot 352) - Rigging Fee: $200

2008 Walker 30,000 Gallon Jacketed 316L S/S Silo, Model: VSHT, S/N: WEP-68957 with Horizontal Agitation, Sensor and Gauge - Rigging Fee: $10,000

Tuchenhagen 316L S/S Tank Valves with Control Tops (For Lot 353) - Rigging Fee: $200

Tuchenhagen 316L S/S Air Valves in Manifold with S/S Rack - Rigging Fee: $175

Tuchenhagen 316L S/S Air Valves in Manifold with S/S Rack - Rigging Fee: $175

Ampco Centrifugal Pump, Model: APS220-22-25, S/N: CC-54139-1-4 with Baldor 15 HP 1,765 RPM Motor: Mounted on S/S Base - Rigging Fee: $150

Tuchenhagen 316L S/S Air Valves in Manifold with S/S Rack - Rigging Fee: $210

Tuchenhagen 316L S/S Air Valves in Manifold with S/S Rack - Rigging Fee: $105

Ampco Centrifugal Pump, Model: APS220-22-25, S/N: CC-54139-1-5 with Baldor 15 HP 1,765 RPM Motor: Mounted on S/S Base - Rigging Fee: $150

Tuchenhagen 316L S/S Air Valves in Manifold with S/S Rack - Rigging Fee: $245

Tuchenhagen 316L S/S Air Valves in Manifold with S/S Rack - Rigging Fee: $105

S/S Silo Door CIP Setup - Rigging Fee: $50