302
Auctioneer has chosen not to publish the price of this lot
Bordentown, New Jersey
0.00%
18.00%
Description
NEW Tetra TBA19 Parts (Section A, Box 3) - Total New Cost = $7,028.98, Including: (1) ROLLER: 1548284, DRIVE, 1-1/2" X 6", (1) ROLLER: TETRA, MAN309 ,SM SQUEEGEE, FILLER/RESURFACE, (2) ROLLER: TETRA, MAN310, LG SQUEEGEE, FILLER/RESURFACE, (1) SHIM: METAL, TETRA PAK, 90270-0345, SET OF 2, (1) VALVE, CHECK: TETRA, 90459-2362, (1) LID: TETRA, 533234-0000, (2) CYLINDER, PNEUMATIC: REXROTH, 1322008000, 20MM BORE, 80MM STROKE, DOUBLE ACTING, TETRA 90923-0847, (6) SCREW: M8 DIA, 45MM LG, JAW GUIDE, TETRA PAK INC, 312105-0460, (1) RING: TETRA, 90091-0170, 25MM X 30MM X 4.2MM, PRESSURE JAW GUIDE, (3) KEY: TETRA, 315701-0271, 8MM X 7MM X 45 MM, PARALLEL, ROUND ENDS, (3) KEY: TETRA, 315701-0263, 8MM X 7MM X 20 MM, PARALLEL, ROUND ENDS, (4) ROLLER: TETRA PAK, 22475-0000, CURVE, (1) DOWEL: TETRA PAK, 256461-0000, FFU PRESSURE DEVICE, (4) BUSHING: FLANGED, 8/14x8-18x3 mm, TETRA PAK, 321101-0143, TEXT: Photocell unit, (1) GASKET: TETRA, 90091-0159 ,30MM X 330MM X 9MM THK, HYDRAULIC SYSTEM, (2) GASKET: TETRA, 577773-0000, PEROXIDE PUMP, (1) PLUG: BLIND, 12MM, TETRA, 342715-0105, AIR DISTRIBUTION, (1) PLATE: TETRA, 23769-0000, STOP, FLAP SEALING UNIT, (2) KEY: TETRA, 90458-0508,TSA-21,8MM X 7MM X 16 MM, PARALLEL, ROUND ENDS, (5) BEARING, BALL: SKF, 6202-2RSH, 15MM ID, 35MM OD, 11MM WD, DEEP GROOVE, SGL ROW, 2 SEAL, TETRA 321313-0102, (10) SCREW: M6 DIA, 60MM LG, PEROXIDE PUMP, TETRA, 312105-0382, (10) NUT, LOCK: M6 DIA, TETRA, 312811-0316, PEROXIDE PUMP, (4) PIPE: TETRA, 534634-0000, H202 FILLING STATION VALVE, (1) GUIDE: TETRA,1273581-0000, (1) BEARING: TETRA 90214-0237, BALL, 30/62x20, Spherical, SKF 2206E-2RS1/TN9/GFF, (1) GASKET: TETRA PAK, 90217-0313, WATER SEPARATOR, FLOAT CUP, (1) SHAFT: TETRA, 2522249-0000, WEB TENSION, (1) CAM: TETRA,030-1490237-0000, VOLUME, L5 TBA125, (1) CAM: TETRA,040-1490238-0000, VOLUME, L5 TBA125, (1) CAM: TETRA, 010-1490235-0000, VOLUME, L5 TBA125, (5) NUT, HEX: M8 DIA, STAINLESS, HEX NUT/HELI COIL, TETRA, 312811-0318, (7) SCREW: M8 DIA, 90MM LG, SS, TETRA 312105-0469, (1) KNIFE: TETRA, 580321-0000, STRIP SPLICING, (1) RING, RETAINING: SCRUBBER, TETRA, 571087-0000, (1) ADAPTER, HOSE TO PIPE: SS, PARKER HANNIFIN CORP, SH4-63, CONNECTOR, (22) INSERT, THREADED: HELI-COIL, M6 INTERNAL, TETRA, 312911-0118, (4) BEARING, BALL: SKF, 6200-2RSH, .750 ID, 1.250 OD, TETRA 321313-0100, (3) SWITCH, SAFETY:, SCHMERSAL, AZ-15-ZVRK-M20-2254, (1) PULLEY: TIMING BELT-BEARING UNIT, CAST, TETRA PAK, 1273573-0000, (2) VALVE, CHECK: TETRA, 90230-0017, NON RETURN, (1) VALVE: BELL & GOSSETT, 117415, CIRCUIT SETTER, 0.75", 3/4 IPS, (14) SEAL: TETRA, 90459-5936, BEARING, 12MM ID X 16MM OD X 3MM THK, FOLDING FLAP, (1) PIN: AXLE, 979579-0000, (25) BEARING, PLAIN/SLEEVE: TETRA, 321120-0102, BUSHING, 6MM ID, 8MM OD, 10MM LG, STL, (2) RING: TETRA PAK, 315220-0167, 27 X 35 X 10.5mm, V30S, (8) RING: TETRA, 90091-0214, 16MM X 20.9MM X 2.2MM, PRESSURE JAW SEALING, (4) RING: TETRA, 90091-0216, 7.1MM X 12MM X 2.2MM, CUTTING JAW SEALING, (2) RING: TETRA, 90091-0091, 10MM X 14MM X 1.7MM, CUTTING JAW SEAL, (7) RING: TETRA, 90091-0169, 12MM X 15MM X 3.2MM, CUTTING JAW GUIDE, (4) RING: TETRA, 90091-0215, 25MM X 32.5MM X 3.2MM, PRESSURE JAW SEALING, (1) ASSEMBLY: AUTOMATIC RESET, HYDAC, VD5B.1, F/ HYDRAULIC FILTER HOUSING, (1) COUPLING, PIPE: FILLER FLAP HEATER, 342920-0122 , TETRA PAK, (1) ROLL: TETRA, 257306-0000, (1) MOTOR: PEROXIDE TRANSFER , PUMP, TETRA, 90045-0161, FILLER (1) PUMP, ROTARY: GEAR, TETRA PAK INC, 90321-0101, PEROXIDE TRANSFER, FILLER, and (4) CHART, CIRCULAR: RECORDER, 10-1/2" DIA,0-300 SCALE, 24 HR, COMMANDER 1900, 500P1225-73
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
NEW Tetra TBA19 Parts (Section A, Box 3) - Total New Cost = $7,028.98, Including: (1) ROLLER: 1548284, DRIVE, 1-1/2" X 6", (1) ROLLER: TETRA, MAN309 ,SM SQUEEGEE, FILLER/RESURFACE, (2) ROLLER: TETRA, MAN310, LG SQUEEGEE, FILLER/RESURFACE, (1) SHIM: METAL, TETRA PAK, 90270-0345, SET OF 2, (1) VALVE, CHECK: TETRA, 90459-2362, (1) LID: TETRA, 533234-0000, (2) CYLINDER, PNEUMATIC: REXROTH, 1322008000, 20MM BORE, 80MM STROKE, DOUBLE ACTING, TETRA 90923-0847, (6) SCREW: M8 DIA, 45MM LG, JAW GUIDE, TETRA PAK INC, 312105-0460, (1) RING: TETRA, 90091-0170, 25MM X 30MM X 4.2MM, PRESSURE JAW GUIDE, (3) KEY: TETRA, 315701-0271, 8MM X 7MM X 45 MM, PARALLEL, ROUND ENDS, (3) KEY: TETRA, 315701-0263, 8MM X 7MM X 20 MM, PARALLEL, ROUND ENDS, (4) ROLLER: TETRA PAK, 22475-0000, CURVE, (1) DOWEL: TETRA PAK, 256461-0000, FFU PRESSURE DEVICE, (4) BUSHING: FLANGED, 8/14x8-18x3 mm, TETRA PAK, 321101-0143, TEXT: Photocell unit, (1) GASKET: TETRA, 90091-0159 ,30MM X 330MM X 9MM THK, HYDRAULIC SYSTEM, (2) GASKET: TETRA, 577773-0000, PEROXIDE PUMP, (1) PLUG: BLIND, 12MM, TETRA, 342715-0105, AIR DISTRIBUTION, (1) PLATE: TETRA, 23769-0000, STOP, FLAP SEALING UNIT, (2) KEY: TETRA, 90458-0508,TSA-21,8MM X 7MM X 16 MM, PARALLEL, ROUND ENDS, (5) BEARING, BALL: SKF, 6202-2RSH, 15MM ID, 35MM OD, 11MM WD, DEEP GROOVE, SGL ROW, 2 SEAL, TETRA 321313-0102, (10) SCREW: M6 DIA, 60MM LG, PEROXIDE PUMP, TETRA, 312105-0382, (10) NUT, LOCK: M6 DIA, TETRA, 312811-0316, PEROXIDE PUMP, (4) PIPE: TETRA, 534634-0000, H202 FILLING STATION VALVE, (1) GUIDE: TETRA,1273581-0000, (1) BEARING: TETRA 90214-0237, BALL, 30/62x20, Spherical, SKF 2206E-2RS1/TN9/GFF, (1) GASKET: TETRA PAK, 90217-0313, WATER SEPARATOR, FLOAT CUP, (1) SHAFT: TETRA, 2522249-0000, WEB TENSION, (1) CAM: TETRA,030-1490237-0000, VOLUME, L5 TBA125, (1) CAM: TETRA,040-1490238-0000, VOLUME, L5 TBA125, (1) CAM: TETRA, 010-1490235-0000, VOLUME, L5 TBA125, (5) NUT, HEX: M8 DIA, STAINLESS, HEX NUT/HELI COIL, TETRA, 312811-0318, (7) SCREW: M8 DIA, 90MM LG, SS, TETRA 312105-0469, (1) KNIFE: TETRA, 580321-0000, STRIP SPLICING, (1) RING, RETAINING: SCRUBBER, TETRA, 571087-0000, (1) ADAPTER, HOSE TO PIPE: SS, PARKER HANNIFIN CORP, SH4-63, CONNECTOR, (22) INSERT, THREADED: HELI-COIL, M6 INTERNAL, TETRA, 312911-0118, (4) BEARING, BALL: SKF, 6200-2RSH, .750 ID, 1.250 OD, TETRA 321313-0100, (3) SWITCH, SAFETY:, SCHMERSAL, AZ-15-ZVRK-M20-2254, (1) PULLEY: TIMING BELT-BEARING UNIT, CAST, TETRA PAK, 1273573-0000, (2) VALVE, CHECK: TETRA, 90230-0017, NON RETURN, (1) VALVE: BELL & GOSSETT, 117415, CIRCUIT SETTER, 0.75", 3/4 IPS, (14) SEAL: TETRA, 90459-5936, BEARING, 12MM ID X 16MM OD X 3MM THK, FOLDING FLAP, (1) PIN: AXLE, 979579-0000, (25) BEARING, PLAIN/SLEEVE: TETRA, 321120-0102, BUSHING, 6MM ID, 8MM OD, 10MM LG, STL, (2) RING: TETRA PAK, 315220-0167, 27 X 35 X 10.5mm, V30S, (8) RING: TETRA, 90091-0214, 16MM X 20.9MM X 2.2MM, PRESSURE JAW SEALING, (4) RING: TETRA, 90091-0216, 7.1MM X 12MM X 2.2MM, CUTTING JAW SEALING, (2) RING: TETRA, 90091-0091, 10MM X 14MM X 1.7MM, CUTTING JAW SEAL, (7) RING: TETRA, 90091-0169, 12MM X 15MM X 3.2MM, CUTTING JAW GUIDE, (4) RING: TETRA, 90091-0215, 25MM X 32.5MM X 3.2MM, PRESSURE JAW SEALING, (1) ASSEMBLY: AUTOMATIC RESET, HYDAC, VD5B.1, F/ HYDRAULIC FILTER HOUSING, (1) COUPLING, PIPE: FILLER FLAP HEATER, 342920-0122 , TETRA PAK, (1) ROLL: TETRA, 257306-0000, (1) MOTOR: PEROXIDE TRANSFER , PUMP, TETRA, 90045-0161, FILLER (1) PUMP, ROTARY: GEAR, TETRA PAK INC, 90321-0101, PEROXIDE TRANSFER, FILLER, and (4) CHART, CIRCULAR: RECORDER, 10-1/2" DIA,0-300 SCALE, 24 HR, COMMANDER 1900, 500P1225-73
(6) Tetra Pak Aseptic Brik Filling & Packaging Lines formerly of Nestle
Sale Date(s)
Venue Address
201 Elizabeth St.
Bordentown
New Jersey
United States
For Harry Davis & Company delivery information please telephone 412.765.1170.
Important Information
A Harry Davis & Company ONLINE and ON-SITE auction of (6) Tetra Pak Aseptic Brik Filling and Packaging Lines formerly of Nestle. Three lines are for 200ml Slim packages, two lines are 125ml Slim and one line is for 32 Ounce. S/S Processors, an 8,000 Gal. Blend System, Sterilization skid and additional equipment will also be sold.
Terms and Conditions
TERMS: Online bidding requires a $2,500.00 REFUNDABLE DEPOSIT. BIDDERS OUTSIDE THE UNITED STATES MUST POST A $5000.00 REFUNDABLE DEPOSIT IN ADVANCE OF THE AUCTION.
Please send check to: Harry Davis & Company, 1725 Boulevard of the Allies, Pittsburgh, PA 15219.
Deposits accepted by CHECK or WIRE TRANSFER. Deposit can NOT be charged to a credit card.
Funds may also be wire transferred to the account of Harry Davis & Company. CALL (412) 765-1170 to COMPLETE WIRE TRANSFER!
To insure approval as a bidder, please make deposit arrangements as far in advance of the auction as possible.
INTERNET BUYERS PREMIUM IS 18%.
Total purchases to be paid within 48 hours following the auction in cash, cashiers check or wired funds. All
purchases must be removed within period announced by auctioneer. All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.
Additional Terms of Sale posted on our Web site: www.harrydavis.com
