18
Lot
18
FIDES MDC-80 AUTOMATIC SPRING COILING MACHINE FOR BONNELL SPRINGS
Operation
The machine MDC-80 produces bi-conical Bonnell springs, works without compressed air and is driven by several servo motors. A steel wire is lo-cated at a swift. This wire gets unwounded, coiled and cut to a raw spring. This raw spring is afterwards knotted at both ends, heat treated and guid-ed as a final spring onto the storage tray ready for being stored or assem-bled. The standard equipment includes all the components necessary for the production, such as wire swift for up to 1000 kg, tooling and spare parts set. A noise-reduction and safety housing is also included in this ma-chine. The hard metal parts, manufactured with great precision, guaranty a long service life.
Output
Up to 80 springs/min. Coils with tall height or unstable geometry lead to a reduced performance of the machine.
Working range
Spring end ring, inner Ø Dfi: 65 - 90 mm
Spring wire Ø: 1.9 - 2.3 mm (for Dfi: 65 - 70 mm)
1.9 - 2.4 mm (for Dfi: 70 - 90 mm)
Spring height 4 coils: 55 - 75 mm (on special request)
4 coils: 75 - 120 mm
5 coils: 120 - 150 mm
6 coils: 140 - 160 mm
7 coils: 160 - 190 mm (reduced speed / on special request)
Technical data
Power requirements: 400 V, 3 phases, 50 A or
220 V, 3 phases, 90 A
main motor: 3.0 kVA
knotting motors: 1.5 kVA each
swift motor: 1.5 kVA
heat treatment: 10.0 KVA
Weight: net approx. 2000 kg
Item is located in Goshen, IN.
Contact Brian @ 574.268.4940 with any questions
For Hahn Auctioneers Inc. delivery information please telephone 574-536-7682.
All successful bidders are required to contact auction company immediatly upon completion of auction to arrange payment and removal.
Brian 574-268-4940
BidSpotter Customer Service Support Department
To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone, email or LiveChat
TERMS & CONDITIONS:
1. All sales final. No bidder
may retract a bid made during
the sale for any reason.
2. Payment is due immediately
upon completion of the
Auction. All payments must be
in the form of wire transfers,
or certified funds unless
other arrangements have been
approved in advance of the
auction. Credit Cards are
subject to an additional 3%
fee. Cash payments will
be reported according to U.S.
Federal Government
Requirements.
3. All sales are ?AS IS? and
?Where Is?. Bidder is
responsible for inspections
and verification of condition,
authenticity, and completeness
of any item purchased. No
warranties or representations
of any type whatsoever are
made by Hahn Auctioneers, Inc.
Statements printed in
catalogs, brochures, online,
signs, and verbal statements
made by auctioneers or staff
are representations made by
the Seller and Hahn
Auctioneers, Inc. has no
obligation to verify or
authenticate any such claims
or representations. Any
announcements made at the time
of the sale supersede any
earlier printed matter or
statements.
4. Buyer is responsible for
all risk of loss or damage
immediately upon purchase of
the item. All items purchased
must be removed from the
auction site at the buyer?s
expense by posted removal
date. Removal DATE: By appointment only.
5. Final bid price does not
include buyer?s premium or
applicable taxes on each lot.
Buyer is responsible to pay
all city, state or other taxes
due on inventory for which the
buyer does not qualify as
exempt. Proof of exemption is
buyer?s responsibility.
No lots may be removed until
the conclusion of the Auction,
although invoices are
available for payment at any
time. COMPLETE PAYMENT IS
REQUIRED ON SALE DAY. NO
EQUIPMENT OR RELATED ITEMS MAY
BE REMOVED UNTIL COMPLETE
PAYMENT IN FULL IS RECEIVED.
All items are offered AS IS,
WHERE IS, WITHOUT WARRANTIES
WHATSOEVER, WHETHER EXPRESSED,
IMPLIED OR STATUTORY in units
of measure as announced at the
time of sale. No claim will be
considered for allowance,
adjustment or rescission of
any sale based upon the
failure of the property to
correspond to any particular
standards or expectations of
the buyer. Our catalog and
other advertising material are
provided for continuity of the
Auction. The description in
the catalog or oral opinions
are provided for informational
purposes only. It is the
responsibility of the buyer to
ascertain, by his own means,
the correctness of year and
model and equipment
options/accessories prior to
bidding.
Persons attending are notified
that an Auction Site is a
potentially dangerous place.
Every person at the Auction
Site before, during and after
the auction sale shall be
deemed to be there at his or
her own risk with notice of
the condition of the premises.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
FIDES MDC-80 AUTOMATIC SPRING COILING MACHINE FOR BONNELL SPRINGS
Operation
The machine MDC-80 produces bi-conical Bonnell springs, works without compressed air and is driven by several servo motors. A steel wire is lo-cated at a swift. This wire gets unwounded, coiled and cut to a raw spring. This raw spring is afterwards knotted at both ends, heat treated and guid-ed as a final spring onto the storage tray ready for being stored or assem-bled. The standard equipment includes all the components necessary for the production, such as wire swift for up to 1000 kg, tooling and spare parts set. A noise-reduction and safety housing is also included in this ma-chine. The hard metal parts, manufactured with great precision, guaranty a long service life.
Output
Up to 80 springs/min. Coils with tall height or unstable geometry lead to a reduced performance of the machine.
Working range
Spring end ring, inner Ø Dfi: 65 - 90 mm
Spring wire Ø: 1.9 - 2.3 mm (for Dfi: 65 - 70 mm)
1.9 - 2.4 mm (for Dfi: 70 - 90 mm)
Spring height 4 coils: 55 - 75 mm (on special request)
4 coils: 75 - 120 mm
5 coils: 120 - 150 mm
6 coils: 140 - 160 mm
7 coils: 160 - 190 mm (reduced speed / on special request)
Technical data
Power requirements: 400 V, 3 phases, 50 A or
220 V, 3 phases, 90 A
main motor: 3.0 kVA
knotting motors: 1.5 kVA each
swift motor: 1.5 kVA
heat treatment: 10.0 KVA
Weight: net approx. 2000 kg
Item is located in Goshen, IN.
Contact Brian @ 574.268.4940 with any questions
For Hahn Auctioneers Inc. delivery information please telephone 574-536-7682.
All successful bidders are required to contact auction company immediatly upon completion of auction to arrange payment and removal.
Brian 574-268-4940
BidSpotter Customer Service Support Department
To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone, email or LiveChat
TERMS & CONDITIONS:
1. All sales final. No bidder
may retract a bid made during
the sale for any reason.
2. Payment is due immediately
upon completion of the
Auction. All payments must be
in the form of wire transfers,
or certified funds unless
other arrangements have been
approved in advance of the
auction. Credit Cards are
subject to an additional 3%
fee. Cash payments will
be reported according to U.S.
Federal Government
Requirements.
3. All sales are ?AS IS? and
?Where Is?. Bidder is
responsible for inspections
and verification of condition,
authenticity, and completeness
of any item purchased. No
warranties or representations
of any type whatsoever are
made by Hahn Auctioneers, Inc.
Statements printed in
catalogs, brochures, online,
signs, and verbal statements
made by auctioneers or staff
are representations made by
the Seller and Hahn
Auctioneers, Inc. has no
obligation to verify or
authenticate any such claims
or representations. Any
announcements made at the time
of the sale supersede any
earlier printed matter or
statements.
4. Buyer is responsible for
all risk of loss or damage
immediately upon purchase of
the item. All items purchased
must be removed from the
auction site at the buyer?s
expense by posted removal
date. Removal DATE: By appointment only.
5. Final bid price does not
include buyer?s premium or
applicable taxes on each lot.
Buyer is responsible to pay
all city, state or other taxes
due on inventory for which the
buyer does not qualify as
exempt. Proof of exemption is
buyer?s responsibility.
No lots may be removed until
the conclusion of the Auction,
although invoices are
available for payment at any
time. COMPLETE PAYMENT IS
REQUIRED ON SALE DAY. NO
EQUIPMENT OR RELATED ITEMS MAY
BE REMOVED UNTIL COMPLETE
PAYMENT IN FULL IS RECEIVED.
All items are offered AS IS,
WHERE IS, WITHOUT WARRANTIES
WHATSOEVER, WHETHER EXPRESSED,
IMPLIED OR STATUTORY in units
of measure as announced at the
time of sale. No claim will be
considered for allowance,
adjustment or rescission of
any sale based upon the
failure of the property to
correspond to any particular
standards or expectations of
the buyer. Our catalog and
other advertising material are
provided for continuity of the
Auction. The description in
the catalog or oral opinions
are provided for informational
purposes only. It is the
responsibility of the buyer to
ascertain, by his own means,
the correctness of year and
model and equipment
options/accessories prior to
bidding.
Persons attending are notified
that an Auction Site is a
potentially dangerous place.
Every person at the Auction
Site before, during and after
the auction sale shall be
deemed to be there at his or
her own risk with notice of
the condition of the premises.