Refine your search
Primary Category
Category
Brand
Item Type
- Conveyor (11)
- Belt Conveyor (5)
- Motor (5)
- Saw (4)
- Van Trailer (4)
- transformer (4)
- Log Deck (3)
- Trailer (3)
- Belt Sander (2)
- Fork (2)
- Forklift (2)
- Loader (2)
- Material Handling (2)
- Planer (2)
- Roller (2)
- Sander (2)
- Sawmill (2)
- Air Compressor (1)
- Band Mill (1)
- Bearing (1)
- Blower (1)
- Compressor (1)
- Conduit (1)
- Converter (1)
- Counter (1)
- Counter Sink (1)
- Cyclone (1)
- Drill (1)
- Drill Press (1)
- Electric Motor (1)
- Electrical Box (1)
- Flatbed Trailer (1)
- Head Saw (1)
- Kiln (1)
- Knife (1)
- Log Turner (1)
- Metal Detector (1)
- Motor Control (1)
- Rollcase (1)
- Saw Blade (1)
- Skidder (1)
- Storage Unit (1)
- Table Saw (1)
- Trim Saw (1)
- Truck (1)
- Wheel Loader (1)
- Wire (1)
State/Province
Town/City
- List
- Grid
-
62 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Information Lot
On October 21, 2024, Beal Lumber suffered a fire at the Jonesville, SC plant. We are selling at auction the assets located at this location, this...
Titled Vehicles
Once your payment is received and clears our bank, you will be contacted to confirm your information regarding the title registration. Estimated t...
Preview and Inspection
Buyers are responsible to do their own inspection of equipment to determine the condition and usefulness of the items that they purchase. Preview ...
Removal Deadline: BUYERS ARE RESPONSIBLE TO REMOVE AND LOAD ALL ITEMS PURCHASED. Loadout of smalls and uninstalled equipment: Immediately upon a P...
Rigging Information
Rigging is the responsibility of the buyer. All contractual agreements are made between the buyer and a rigger. If you choose to rig your own eq...
Payment Information
All payment are due immediately upon receipt of your invoice. Payment Terms: 18% online buyers premium are in effect for all purchases. Cash, Comp...
Sales Tax
7% South Carolina Sales tax applies without proper tax exempt forms INFO@GWKITTRELLAUCTIONS.COM 931-698-8462
Fire went through hydraulic system, control booth burned, and electric motor burned. Frame, Bull wheels and Head did NOT get burned includes suppo...
HMC 16' 4 Strand Log Deck
4 arm stop & loader, hydraulic Tulsa winch drive, H78 chain, support steel to the ground. No fire damage. No hydraulic supply.
to include carriage, log turner, track, husk frame, carriage drive and Hurdle frame. Does not include main motor or outfeed roll case. Extensive ...
24' 3 Strand Log Deck
3 Arm Stop & Loader nose skids, Refnek hydraulic drive, looks like fire charred the logs on the deck. Did not get hot enough to burn hydraulic hos...
(12) 30x12" bevel gear rolls, 5' 3 strand air operated jump up transfer, Does not seem to have any fire damage except for melted spot on wire feed...
2 moveable saws, infeed roll case and single belt tailing, fire burnt the belt of tailing device. Burned belt off motors, burned the push button c...
6'4 Strand Transfer to Edger
includes motor and drive. Only fire damage appears to be motor as the fire runs through wires, but does freely spin.
3 Strand H-78 Roof Top Chain, 1 strand H-78 chain motor and drive. Very minimal fire damage, only due to lighting falling and causing fire to plas...
includes (2) 20 HP individually driven motors, hydraulic power supply, push button controls, block and waste bolt conveyor and supports to the gro...
18" bottom, 10" flared sides, 7.5 hp drive. Fire damage from fire dripping off Debarker hydraulic. 1st 10' section pain scorched and 1 set of fibe...
Dual Truck Loadout System
with 2 overhead 40' x auger, (2) motor and drives and supports. No motor controls, no fire damage.
to auger system, just replaced 30" cleated belt. Motor and reduction drive, no motor controls, no fire damage.
Precision Complete Chip Pack
to include Precision 58-15,  6 knife Big Mouth Chipper, Precision 6x6 (sn: S2423_ shaker screen, Precision cyclone, 125 HP main motor, No motor ...
18" bottom, 10" flared sides, 5' fiberglass sections, 9' sawdust screen, 10 HP drive, no motor controls, Fire damage: Paint scorched a little over...
no apparent fire damage.
under the head saw, 18" bottom, 10" flared sides, 5 HP drive, No motor controls, Fire damage to pan, paint scorched, sides did warp and fiberglas...
18" bottom, 10" flared sides, 5 HP drive. Fire damage: scorched paint & 5 fiberglass paddles.
44" wide, motor and drive. Fire damage: Scorched paint & some warped sides (pictures). May have damage in drive motor.
32" wide, motor and drive. Fire damage the worst of all the conveyors, belt burned, most rollers are frozen.
with motor. Fire damage: Fire dripped on motor and back of blower. Blower seems ok but motor looks bad.
to rail cars, 32" wide, motor & drive. Supports to ground and catwalk. No motor controls, Fire Damage: Belt burned, Tail Pully burned, (7) set of ...
includes (2) 40' augers, motor and drive, no motor controls. No fire damage.
30" cleated belt motor & drive. No motor controls, no fire damage.
and (5) 15" Edger Blades. All got hot but are good for signs if nothing else.
20' Eaves, Fire Damage: Roof looks ok from inside, the side mostly warped, main structure beams look fine. Several of the side pearlings are warpe...
to include main electrical boxes against wall, air compressor system, 110 Boxes with transformer, main Westinghouse motor at head saw and any salv...
includes a set of steps to the ground, trimmer, crossover steps under the sawmill, all apron slides. Does not include frame for Hurdle mill, catwa...
went on the old edger.
SN: 95-3674BM, Uninstalled, Wheels were ground once prior to removal. Purchased with plans to install and decided to go another direction. Loca...
Baxter S-370 Planer
helical head with 40hp motor 32in wide S/N18274. Located at 28655 SR 128, Clifton, TN 38425
WoodMizer 1000 kiln
1000 BDFT capacity 220V S/N 1285035 owner states it may need blankets and freon. Located at 28655 SR 128, Clifton, TN 38425
Sandingmaster Belt sander
double head 43in belt sander (1) 100Hp drive motor (1) 50Hp motor (1) .75 KW motor
(4) Phase converters
25hp 230V. Located at 28655 SR 128, Clifton, TN 38425
24in Woodmaster belt sander
Located at 28655 SR 128, Clifton, TN 38425
6in powermatic planer
S/N 680069 Model 180. Located at 28655 SR 128, Clifton, TN 38425
Located at 28655 SR 128, Clifton, TN 38425
to include: (2) Homemade swing machine sever motor; (2) Weg Counter Sink Drills on each machine, Baldon Counter sink drills on each machine; 12" R...
(SN: S-H6-21484), Cummins enginewas installed 2 years ago, , 8'x12" forks, side shift, Dual Front Tires, Enclosed cab, all glass intact, showing 1...
Cat T80D 8000 lb forklift
propane, (sn: 5LBD0435) single mast, 4' forks, shows 4208 hours Located in Frenchville, PA Call Zach for more details 931-698-7058
VIN: HZL1810316, Engine Model DEF20CAF4, Operating weight 5300 kg, rated loader 2000 kg, engine power 50kW, Diesel Engine. Located at 576 Powell L...
2004 John Deere Loader
Check back for full details. Located at 576 Powell Loop, Andrews, SC 29510
(sn: DW748GX597580), 10' grapple with winch, Winch SN: TOWM112514912, Tire side 30.5x16.5, showing 10,072 hours. Located at 1915 Hwy 49 East, Char...
VIN: 1TTF482017202495, Super beam, spread axle, 295/75R22.5 Tires
VIN: 1Z92A4520ET199270, has tarp system, tip guided swing gate, 11R24.5 tires
VIN: 1Z92A4520ET199269,has tarp system ,top guided swing gate, 11R24.5 tires
VIN: 1Z92E4220ET199360, top guided swing gate with factory hole for blowing chips
VIN: 1Z92E4220ET199315, top guided swing gate with factor hole for blowing chips, 11R24.5 Tires.
Loading...-
62 item(s)/page