Refine your search
Panther Machine #2 - Custom Machine Shop
- Ended Nov 20, 2019 2:38pm CST (8:38pm GMT)
- 3601 Morton Drive
- East Moline
- United States
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Assorted mill cutters, various sizes and types, various conditions.
Sanding belts, assorted sizes and types, belt type, pad, rounds, various sizes various grit, mixed lot.
Transformer 50.5 kVA, three phase, type P, primary voltage is 230/460, also included is a coolant pump condition unknown
New Grinding cups, Norton grinding wheels used for either tool and cutter grinder or tool post grinder.
Assorted Grinding wheels various sizes and types all are new in the box include shoulder type wheels, straight face, various types and conditi...
Fixture plates, approximate 17“ x 32", approximate 2 inch thick material, condition unknown
Assorted sanding belts, brand new in the box, various sizes and types, various brand-name, various grit size.
Lathe Chuck and face plate, 4 jaw, 16 3/4” inch diameter, approximately 3 5/8" bore, camlock, 13 1/4 inch faceplate with camlock.
New Grinding wheel, two boxes with two grinding wheels per box.
Assorted grinding wheels and belts, various sizes and types, all are new, significant quantity of grinding disks for metal and stainless, 7 1/4”
Kitagawa Lathe chuck, 10 1/2 inch diameter, three jaw, model KTF8864
T slide layout table, approximate 22“ x 24“ with an irregular shape static type approximately 2 1/2 inches thick.
Enco Carbide grinder model TC302, new in 1985, 6 inch diameter, conditions unknown, 110 V.
Assorted lot of drill bits, reamers, collets various sizes and types.
Perishable tooling, assorted lot of drillbits and reamers, various sizes and types, various conditions.
Assorted lot grinding wheels miscellaneous, Various sizes and types.
Tube steel, 1 in.², 18 gauge, 144 inches length, new and in strapped bundle, 216 pieces per bundle.
DoAll surface grinder, model D618 -7, serial number 219–66292, 440 V, three phase, 6“ x 18“ magnetic chuck, hydraulic type, manual downfeed, semi...
Metal grating, 12’ x 18”, two pieces.
Approximately 11 boxes of Milwaukee bandsaw blades, new and in the box, fit a portable bandsaw.
Rotary table, Air controls, 20 inches in diameter, brand-name unknown, condition unknown.
Lathe Jaws and Chuck, The chuck is 315LHMAC -three -88FS, serial number 182913R
Aloris tool post holder attachments, approximately 20 holders, (1) tool post changer. The tool post changer does not fit the holders
Assorted tool holders, various sizes and types.
Lincoln Plasma cutter, model Pro Cuts 60 code number 9819 -one, serial number U193-071-0058, single phase, 208/230/460 V, condition is unknown...
Blackhawk One shot bender, design for rigid pipe, incomplete, no power unit, assorted shoes up to 4 inch.
(2) Tooling fixtures, design for horizontal machining center, brand-name unknown, approximate 10 1/2” x 10 1/2” x 21 1/4”.
Assorted vises, (2) bench vices, (1) machinist vise.
Hauser Rotary table, 16 1/2 inch diameter, single axis, condition unknown
Perishable tooling, Assorted reamers, various sizes and types.
Perishable tooling, adjustable reamers, various sizes and types.
Assorted Insert tool holders
Tool holders, assorted sizes and types, various condition.
Assorted tool holders, Various types and sizes.
Perishable tooling, assorted reamers and mill cutters, various types and sizes.
 Tool holders, CAT 50, various types.
Square tube, 1 in.² 18 gauge 144 inches length 216 pieces per bundle.
Assorted lathe and general tooling, various types, quantities, sizes, and conditions.
Assorted tool holders, various sizes and types.
Nutting Pallet jack, capacity is unknown, handle has been broken and repaired 36 inch forks.
Gray Mills Fluid pump, 115 V, condition unknown
Tool fixture, 10“ x 8“ x 19“.
(2) Kurt machine vises 6 inch, with special fixture jaws, no rotary table, no handles.
Airtek Air dryer, model SCM 100, serial number unknown, 115 V, single phase, capacity 100 SCFM, not under power, smart cycle with dual mode, co...
DeVlieg rotary table, this table has been modified does not have the air mechanism, manual clamps, 30 in.², condition unknown.
Cast-iron layout table, web type, approximate 35 1/2“ x 72 x 72“, mounted on a three legged design, 6 inches thick.
 Chain hoist consisting of (1) Dayton chain hoist, (1) Wrightway half ton chain hoist, condition is unknown.
Lift Rite Pallet jack, 48 inch forks, model ERGO 3000, extended height hydraulic ram. Approximately 32 inch in height.
Cushman chuck, model 91 - 653, 18 -200S, serial number S -02999, 18 inch, three jaw with no jaws, seven and three-quarter inch back bore, six ...
 Chick Machinist Vise model BL850, sale number 000260, double jaw, 8 inch, no handles, condition unknown,
Assorted tool holders, various types and sizes, most are adjustable boring head type.
Perishable tooling, assorted drillbits, various sizes and types, or tapered shank, various conditions.
Kennametal Insert tool holders, various sizes and types.
Walter Surfox Weld cleaning system, model Surfox 202, The torch head is damaged, condition is unknown.
Layout plate, webbed type, approximate 36“ x 72“ x 6“, bonnet on steel frame. Eight leg frame.
Square tube, 1 in.², 18 gauge, 144 inch length, 216 pieces per bundle