- List
- Grid
-
274 item(s)/page
Results for live webcast and timed auctions may not have been verified by the auctioneer. If you are in any doubt of the accuracy of the prices provided, please call the auction house to confirm.
Milwaukee impact wrenches, 18V, 1/2", new.
Makita impact driver, 7.2V, new.
Makita impact driver, 7.2V, new.
(2) Ratchet socket wrenches, 3/4" and 5/8" drive.
Assorted steel marking stamps, letters and numbers, various sizes and quantity.
Milwaukee Sawzall, Catalog number:55200-21, new.
Power rotary table, 24” diameter, hydraulic type, condition is unknown.
Steady rest for lathe, 20" maximum diameter.
Giddings & Lewis, rotary table.
Giddings & Lewis, rotary table, SN: 1916212, 36” square, power type
Power rotary chuck, 22” diameter.
Power rotary chuck, 22” diameter, 8 3/4 “ hole in chuck, custom design, can act as indexer.
Devlieg rotary table.
Devlieg rotary table, SN: 99210, 40" T-slotted table, hydraulic type, condition is unknown
Companion, 5th wheel hitch.
Companion, 5th wheel hitch, Model RVB3400, SN: 4364, purchased new, never used, sliding type.
Post guards flange bottom with 4 bolt holes, 36" height.
Assorted tarps for semi trailer.
Assorted tarps for semi trailer.
Cloth covers to go under semi tarps.
Cloth covers to go under semi tarps.
Chevrolet Tahoe parts.
Chevrolet Tahoe parts; steps, parts, tail lights, muffler.
Lennox Furnace.
Lennox Furnace, Model PLB-91496, SN: SAM9B6SB, not gas, limited usage.
Ramco hydraulic press.
Ramco hydraulic press, Model RP50, SN: 0929, H frame, no ram, 29 1/2" BH, rated at 50T, hydraulic pump is not functioning.
Back rack window guard for pickup.
Back rack window guard for pickup, 68" width.
Aronson tank turner.
Aronson tank turner, SN: 72116, drawing #HS6-116, 60” between wheel centers, rubber wheels, 2 idlers, not been used for some time.
A-frame gantry.
Shop Built, A frame gantry, on 4 casters, includes hoist dolly, 129" overall height, 118" overall width.
Marshalltown, OBI punch press.
Marshalltown, OBI punch press, Model 6, SN:2384, flywheel type, single crank, air activated mechanical clutch, lube system, palm buttons, Rockford...
Blanchard, Rotary surface grinder.
Blanchard, Rotary surface grinder, Model 11D20, SN:B35-4-462, 1/2" chuck remaining, standard machine with neutrifier magnet control, load indicato...
Chicago Dries & Krump, Press Brake, Model 334, SN:L1227, maximum die height 2-3/4", 52" overall, 42" between the uprights, 2-1/2" stroke, air acti...
Jones & Lamson, Turret lathe, Model 5-4.5, SN: 201969, ram type, 16" 3-jaw chuck, 440 volt, 3-phase, has a taper attachment, condition is unknown,...
Monarch, Geared head lathe.
Monarch, Geared head lathe, SN: 34843, Catalog #16", 24.5" actual swing, 30" between the centers, unit is not under power, condition is unknown.
1972 Aronson welding positioners.
1972, Aronson, Welding positioners, Model TS6, SN: 7270, order #12576, these have been modified for specific use, (1) power drive, (1) idler, 30” ...
Cincinnati Milacron, NC horizontal mill, DM, Model Cintimatic 5H2500, SN: 55131H5-74-3, 31"x102" table, original Cincinnati control, approximately...
Kalamazoo grinder, Model ND-14.
Kalamazoo, Grinder, Model ND-14, SN:1018, heavy duty, Type ND, 440 volt, 3-hp, 3-phase, 14"x2", grinding wheel, wire wheel, condition is unknown.
Post mounted jib crane, approximately 11’ length, 180° swing, with Yale 1 ton chain hoist. *BUYER REMOVES AT BUYERS EXPENSE*
Shop built, Jib crane, 360° swing, mounted on floor plate and in ceiling truss, 1 ton rated capacity, arm is approximately 13’ length, no chain ho...
Haas machining center, model VF3.
Haas, Machining Center, Model VF3, SN:19258, 18"x48" table, (20) tool carousel mounted parallel to the table, 22 tool holders, Kurt double jaw vis...
Cincinnati Bickford, Radial arm drill, Model Super Sensitive, SN:3E-880, 13" column, 48" arm, dual sided T-slotted base, power clamping, PDF, incl...
Pratt Whitney jig bore, Model 3B.
Pratt Whitney, Jig Bore, Model 3B, SN:437, 24"x56" table, has an Acu-Rite 2-axis programmable digital readout, readout model VUE-2XM, s/n 36473180...
WF Wells, Horizontal band saw, Model F15, SN:A1224 791286, wet type, is manual or automatic down feed and retract, does not have any automatic fee...
Magliner portable ramp.
Magliner, Ramp, portable, mobile loading ramp, hydraulic system does not function, manual raise and lower, transportation wheels, 64" width, appro...
Yale, Forklift, Model GLCC30CDNUHL077, SN: N494053, 3,000 lb. capacity, 172" mast height, indoor type, triple stage, free lift, side shift, cushio...
Mubea mechanical ironworker.
Mubea, Ironworker, Model KBL88-8F, SN: 135-29513-1972, will cut a 90º angle of 6"x6"x1/2" or 4"x4"x1/2", will shear a 2-1/2" round, shear a 2 ¼” s...
JLG boom lift, Model 40-45.
JLG, Boom lift, Model 40-45, SN: 709083, 2WD, gas power, 4-cylinder Continental engine, tire size 12.5L-15SL, 40' boom, 3'x6' basket, towing tongu...
Wysong power sheer, Model 10-144.
Wysong, Power shear, Model 10-144, SN:P30-108, 10 gauge capacity, 12' overall, mechanical type, under driven, 5' squaring arm, 7-1/2 hp motor, 208...
2000 Panasonic CNC robotic welder.
2000 Panasonic, CNC robotic welder, Model VR-006AL2, Series Panarobo, SN:E-0119M, robotic manipulator, this was set up for robotic welding, additi...
Roura forklift hopper
Roura forklift hoppers, approximately 1 yd. capacity each, good condition ...[more]
1994 Atlas Copco air compressor.
1994 Atlas Copco, Air compressor, Model GA22, SN: AII211731, 30hp.
Pacific hydraulic press brake.
Pacific, Hydraulic press brake, Model K500-12, SN: 5682, capacity of 3/4"x10'6", original leveling tape system, single stroke, set up stroke, cont...
Louden bridge crane.
Louden, Bridge crane, approximately 27’ span, single girder, under slung, 6000lb capacity, cable hoist, pendant control, power trolley, raceway is...
Caterpillar, Forklift, Model 2C6000, SN: AT83F30540, 187" mast height, rated at 5,750 lbs, truck weight approximately 10,610 lbs., attachment of S...
Section of racking.
Section of racking, (4) uprights, (38) bars of various sizes.
XL trailer, Model XL80SD.
XL, Trailer, Model XL80SD, VIN: 4U3B04823YL002495, Step deck trailer, 91,380 lb. GVWR, 20,280 lb. GAWR, concentrated load rating 50,000 lb. in 10'...
JLG scissor lift, Model 2630-ES.
JLG, Scissor lift, Model 2630-ES, SN: 0200118438, 24 volt, 25.4' maximum platform height, maximum rated work load 300 lb., indoor type, non skid t...
Royal T400B forklift.
Royal, Forklift, Model T400B, SN: 190L246, machine weighs 41,750 lbs., machine capacity 40,000lbs., maximum mast height 80”, manual transmission, ...
Custom built trailer, non-finished.
Custom Built, Trailer, non-finished, currently in the sub-frame assembly, made of tube steel, approximately 32' length, approximately 8'6" width, ...
Versa-Kut cold saw.
Versa-Kut, Cold saw, 16" diameter blade, mitering base, automatic in-feed, approximate vertical capacity of 7", manual/hydraulic vise.
Case 1845C skidloader.
Case, Skidloader, Model 1845C, SN: JAF0179362, manual quick coupler with GP bucket, 72" width, auxiliary hydraulics, 3,883 hours on the meter, foo...
Vestil Manufactring forklift jib.
Vestil Manufacturing, Forklift jib, extendable type, 12”, low profile, in very good condition
Loading...-
274 item(s)/page