Rolling tool chest, craftsman tool chest, (2) sawhorses { Rigging Fee: $150 }

Amerex portable fire extinguisher cart, Model 334, 100lb. carbon dioxide extinguishers { Rigging Fee: $50 *Skidded* }

Jupiter Pneumatic portable air compressor, Model 35002020HTJP, SN 02432010-0770, 120V, 15 Amp, 60Hz, 2 hp, 175 psi { Rigging Fee: $50 *Skidded* }

Cabinet and contents, including assorted welding supplies, welding wire, welding rod, torch tips, 48 in. long x 24 in. wide x 84 in. tall { Riggin...

Cabinet and contents, metal detector faces, lights, 48 in. long x 24 in. wide x 84 in. tall { Rigging Fee: $100 *Skidded* }

Mild steel cart, 36 in. long x 18 in. wide x 72 in. tall, with welding helmets and face shields { Rigging Fee: $50 *Skidded* }

Mild steel table with contents, assorted nuts, bolts, concrete anchors, table 60 in. long x 28 in. wide x 35 in. tall { Rigging Fee: $100 *Skidded...

Wire metro rack and contents, assorted electrical plug ends, breakers, assorted electrical hardware { Rigging Fee: $50 *Skidded* }

Stanley Vidmar 7 drawer cabinet and contents, including brass fittings, copper fittings, lead fittings, pressure gauges, pvc fittings { Rigging Fe...

Stanley Vidmar 7 drawer cabinet and contents, including friction rings, plastic sprockets, bearings { Rigging Fee: $150 *Skidded* }

Stanley Vidmar 7 drawer cabinet and contents, sprockets, including oil seals, chain links, torque limiters, love joys { Rigging Fee: $150 *Skidded...

Stanley Vidmar 7 drawer cabinet and contents, including key stock, bushings, sprockets, pulleys { Rigging Fee: $150 *Skidded* }

Stanley Vidmar 7 drawer cabinet and contents, including gp relays, AB contractors, cable tie and tape, cord sets, Markem parts { Rigging Fee: $150...

Lot of 5 mild steel cabinets and contents { Rigging Fee: $200 *Skidded* }

Lot of 2 Chicago Pneumatic air wrench impact guns, 3/4 in. drive, with air gun { Rigging Fee: $10 *Skidded* }

Pallet of Fastenal drawers and contents, machine screws and washers, wire nuts, thumb screws, socket head cap screws, socket screws, nuts, washers...

Pallet of Fastenal drawers and contents, flat head and Philips machine screws, wire tires, wire nuts, set screws, washers, wall anchors, and misc....

Pallet of Fastenal drawers and contents, brass fittings, stay cons, rivets, shaft collars, o rings, taper pins, retainer rings, air fittings, snap...

Shelf and contents, assorted drill bits, assorted non adjustable pipe wrenches, mild steel work table { Rigging Fee: $50 *Skidded* }

Cart with assorted hollow rod, 45 in. long pieces { Rigging Fee: $25 *Skidded* }

Wire metro rack and contents, assorted chains { Rigging Fee: $50 *Skidded* }

Rack and contents, 81 in. long x 22 in. wide x 75 in. tall { Rigging Fee: $100 *Skidded* }

Lot of (3) pigeon hole cabinets, bolts, nuts, washers, SS and grade 8 { Rigging Fee: $50 *Skidded* }

Leblond gap engine bed lathe, SN 1204, 19 in. x 54 in., 12 in. 3 haw, 2 in. through spindle, 460V, 3 phase { Rigging Fee: $250 }

2016 Pan and box brake, SN A16100437, 81 in. long { Rigging Fee: $250 }

Profitmaster milling machine, Type 1.mill, SN 1275, 220 volt { Rigging Fee: $250 }

IPS milling machine, Model YFT-M-2, SN JMT2543, year 1986 { Rigging Fee: $250 }

Dayton drill press, Model 2X440A, foot operated { Rigging Fee: $200 *Skidded* }

Amada break, Model S-2532, SN 25321433, up to 96 in. long and 0.1181 inches, 3 phase 230V/400V/460V, foot operated { Rigging Fee: $300 }

Pallet of assorted drill bits, chucks, milling bits { Rigging Fee: $25 *Skidded* }

Systemone parts washer, SN 50132147, 31 in. long x 25 in. wide x 41 in. tall, 115 volt { Rigging Fee: $50 *Skidded* }

Pallet of cabinets and contents, springs, key stock, welding rod { Rigging Fee: $25 *Skidded* }

Wilton horizontal/vertical band saw, Model 3410,7 in. x 12 in., 3/4 HP, on cart { Rigging Fee: $150 }

Van Mark trim-a-brake II, Model T1050, SN 1022473, 126 in. long, light duty { Rigging Fee: $150 }

Steeltree 5 shelf metal rack and contents, angle iron, conduit, square tubing, pvc pipe, copper tubing { Rigging Fee: $250 }

Crown electric stand on pallet jack, Model PE4500-60, SN 6A305148, 6000 lb capacity, 115 in. long forks, 24 volt, 36.9 Hours { Rigging Fee: $150 }

LTD 24 volt charger, Model FERR0510-12, SN 299LTD7359, 12 cell { Rigging Fee: $50 *Skidded* }

Hyster propane forklift, Model H50XL, SN A177B34248K, 4850 lb capacity, 187 in. lift height, 3 stage mast, 42 in. forks, side shift, 3920 hours, c...

Nissan 48 volt electric forklift, Model MCP1B2L25S, SN D766364, 4400 lb capacity, 187 in. lift height, 42 in. forks, side shift, battery dead/cond...

Raymond 24 volt order picking forklift, Model 261-OPC30TT, SN 261-01-01537, 3000 lb capacity, 240 in. lift height, 106 in. tall overall, solid tir...

Barrett 24 volt electric pallet jack, Model EWT2, SN F46-1E0869, 4500 lb capacity, on board charger, battery dead/condition unknown { Rigging Fee:...

Toyota 24 volt riding jack, Model 6TB50, SN 21076 { Rigging Fee: $100 }

Toyota 24 volt riding jack, Model 6TB50 { Rigging Fee: $100 }

Toyota 24 volt riding jack, Model 6TB50, SN 21077 { Rigging Fee: $100 }

Tennant riding 7100 floor scrubber, Model M7100, SN 7100-10155521, 36 volt, 574 hours, with Lester charger { Rigging Fee: $150 }

Tennant walk behind floor scrubber, Model 614164, SN 614164-10227935, 24 volt, with Pro Charging Systems charger { Rigging Fee: $150 }

Toyota 36 volt electric forklift, Model 5FBCU15, SN 62377, 2870 lb capacity, 189 in. lift height, 3 stage mast, 42 in. forks, side shift, battery ...

Prime-Mover, Model PE45W48RU, SN 12878, 12 volt walk behind pallet jack, 12 volt, 4500 lbs. capacity { Rigging Fee: $75 }

Toyota 36 volt electric pallet jack, Model 5FBCU15, SN 61864, 3200 lb capacity, 131 in. lift height, 2 stage mast, 42 in. forks, side shift, dead ...

Nissan 48 volt electric forklift, Model CP15B2L25S, SN 670117, 4400 lb capacity, 187 in. lift height, 42 in. forks, side shift, battery dead/condi...

JLG scissor lift, Model 1932F2, 500 lb capacity, 19 ft. lift height { Rigging Fee: $100 }

Legacy 48 volt batter charger, Model DLG3B24-750, 24 cells, 3 phase, 208/240/480V { Rigging Fee: $50 *Skidded* }

CD Technologies 36 volt battery charger, Model FR18HK1000, 18 cells, 3 phase, 208/240/480V { Rigging Fee: $50 *Skidded* }

Hertner 48 volt auto 1000 battery charger, Model TN-24-775, 24 cells, 3 phase, 208/240/480V { Rigging Fee: $50 *Skidded* }

Crown 48 volt battery charger, Model CR24FR3B-680, 24 cells, 3 phase, 208/240/480V { Rigging Fee: $50 *Skidded* }

LTD 24 volt charger, Model FERR0510-12, 12 cells, 1 phase, 120V { Rigging Fee: $50 *Skidded* }

CD Technologies 24 volt battery charger, Model SFR12A510, 12 cells, 1 phase, 120V { Rigging Fee: $50 *Skidded* }

Crown 48 volt battery charger, Model CR24FR3B-680. 208/24-/480 volt, 3 phase { Rigging Fee: $50 *Skidded* }

90 degree belt conveyor, 36 in. wide SS rod belt, overall 96 in. long x 84 in. wide x 36 in. tall, SS frame, mild steel legs, motor and drive { Ri...

Lot of assorted length safety cages, 60 in. tall { Rigging Fee: $50 }