Lot

2

SEARS CRAFTSMAN 16-Gallon Wet/Dry Vacuum

In Logan Pattern & Engineering Company - EXTREMEL...

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 800-899-8182 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
Bidding has ended
Auctioneer has chosen not to publish the price of this lot
Port Huron, Michigan
6.00%
18.00%
SEARS CRAFTSMAN 16-Gallon Wet/Dry Vacuum
SEARS CRAFTSMAN 16-Gallon Wet/Dry Vacuum

Logan Pattern & Engineering Company - EXTREMELY CLEAN TOOLROOM, WOOD & METALWORKING MACHINERY

Ends from
Venue Address
3211 Atlantic Drive
Port Huron
Michigan
48060
United States

We are making things easier for you, auction specific shipping information coming soon. For now, please visit the Important Information / Terms & Conditions tab [next tab to the right] for auction specific removal dates, preferred vendors and more.

For general shipping information from the auctioneer please see below:

For Westbrook Engineering delivery information please telephone 800-899-8182.

Important Information

Important information: 

Logan Pattern & Engineering Company Online Auction

EXTREMELY CLEAN TOOLROOM, WOOD & METALWORKING MACHINERY INCLUDING LOW HOUR  FADAL VMC, BRIDGEPORT MILLS, LATHES, WOODWORKING, TOOLING & SUPPORT EQUIP

INSPECTION DATES AND TIMES:

Thursday August 8th and Monday August 19th, 2019, From 9am-4pm

AUCTION END DATE:

Lots begin closing on Wednesday August 21st, 2019 at 1:00 pm EST 

REMOVAL DATES FOR HAND CARRY ITEMS:

Removal Dates and Times For Hand Carry Items: Monday August 26th, Tuesday August 27th, and Wednesday August 28th, 2019 From 9:00am to 4:00pm

REMOVAL FOR MACHINERY: TUESDAY AUGUST 27TH AND WEDNESDAY AUGUST 28TH. PLEASE CONTACT WINFIELD MACHINE AT 596-771-0010 TO MAKE ARRANGEMENTS TO LOAD YOUR MACHINES. YOU ARE RESPONSIBLE FOR LINING UP YOUR OWN (FLAT BED OR STAKE) TRUCK(S).

PICKUP LOCATION:

Logan Pattern & engineering Company 3211 Atlantic Drive Port Huron, Michigan 48060

RIGGER:

Contact: Winfield Machine 586-771-0010. Ask for David Winfield for Pricing Quotations. Email: winfieldmachine@ameritech.net

 For more information, email marty@westbrook-eng.com or call 1-586-576-2150.

Featuring:

Fadal 3016 Vertical Machining Center

NASA II CNC Vertical Milling Machine

(5) Bridgeport Milling Machines

(3) Lathes

(3) Drill Presses

Miller Welder 

Large Assortment of Tooling and Support Equipment 

PAYMENT:

Each Buyer is required to make full payment within 48-hours of the close of the auction in U.S. funds in cash, cahiers check, wire transfer, certified funds or company check with your bank's letter of guarantee to Westbrook Engineering, for the full amount of the bid price plus buyers premium and any applicable sales taxes prior to removal of any lots purchased. Credit cards (Visa or Mastercard) will be accepted for payments not to exceed $1,000.00.

 

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Thursday, 8:00 AM EST – 10:00 PM EST
  • Friday, 8:00 AM EST – 6:30 PM EST 

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

Terms and Conditions

1)All Bidders and attendees of this auction sale agree that 
they have read and fully understand the Terms and Conditions of this auction sale. Westbrook Engineering and seller make no warranties as to descriptions or usefulness of the items purchased. The Buyer accepts all faults and that all items are bought As Is with all faults and no Warranties of Marketability or Use.
2)IDENTIFICATION: All participants are required to register 
prior to becoming an Approved Bidder. All Participants 
are required to give full name; permanent street address 
(P.O. Boxes will NOT be accepted or approved); phone 
number(s); email address, valid credit card and business 
name. Subsequent to registration on Bidspotter, approval to bid is at our discretion. Purchases may be removed only on presentation of paid bill. Removal shall be at the expense, risk and liability of the purchaser. Westbrook Engineering shall not be responsible for goods not removed within the time allowed.
3)PAYMENT: Each Buyer is required to make full payment 
within 48-hours of the close of the auction in U.S. funds in cash, cashiers check, wire transfer, certified funds or company check with your banks letter of guarantee to 
Westbrook Engineering, for the full amount of the bid price 
plus buyers premium and any applicable sales taxes prior 
to the removal of any lots purchased. Credit cards (Visa or Mastercard) will be accepted for payments not to exceed $1,000.00.
4)A BUYERS PREMIUM WILL BE CHARGED AT THIS SALE: The 
buyers premium rate for this auction sale is Eighteen
Percent 18%.
5)SAFETY DEVICES: Articles purchased may not incorporate 
approved activating mechanisms, operating safety devices or 
safety guards, as required by OSHA or otherwise. It is 
purchasers responsibility that articles purchased be so 
equipped and safeguarded to meet OSHA and any other 
requirements before placing such articles into operation
6)INDEMNIFICATION: Purchaser shall defend and indemnify and hold Westbrook Engineering and seller harmless from and 
against all claims and liabilities relating to the condition of, removal of, or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state, and local laws applicable to such articles, including OSHA requirements, and Environmental Protection Agency requirements, or for proximate or consequential damages, costs or legal expenses arising there from.
7)CONDITION OF ARTICLES SOLD: AS-IS, WHERE-IS, with all 
faults and without recourse. ALL SALES ARE FINAL! Bidder 
acknowledges they have had the OPPORTUNITY TO INSPECT the 
item(s) prior to the sale and hereby releases Westbrook 
Engineering and seller from any and all responsibility with 
respect to description or condition of the item(s) being 
offered at this auction.
8)ADDITION TO OR WITHDRAWAL FROM SALE: Westbrook Engineering and seller reserve the right to withdraw from the sale any property listed and also add property not listed to this sale. Westbrook Engineering may group lots or subdivide lots in order to benefit the seller. Westbrook Engineering reserves the right to sell the property listed in bulk, or to alter the order of sale. All items are subject to prior sale.
9)CLAIMS: No claim of any nature against Westbrook 
Engineering or seller will be allowed after removal of the 
assets from the premises, including but not limited to any 
claims for personal injury, property damage, or for 
incidental or consequential damages.
10)RESPONSIBILITY FOR NON-DELIVERY: Westbrook Engineering 
and seller are not liable, in any event, for the non-
delivery to a buyer of any lot purchased. The buyers sole 
remedy in the event of non-delivery shall be a return of the buyers payment. Westbrook Engineering and seller shall 
not be responsible for any other damages of any kind.
11)RISK TO PERSON AND PROPERTY: Persons responsible for 
removal of goods assume all risks of damage of or loss to 
person and property and specifically release Westbrook 
Engineering and seller from liability therefore. Neither 
Westbrook Engineering nor the seller shall be liable by 
reason of any defect in or condition of the premises on 
which the sale is held.
12)CONTRACT MOVERS: If purchaser wishes to hire or contract with a machinery mover, rigger or other type of outside contractor, proof of PROPER INSURANCE must be forwarded to Westbrook Engineering protecting Westbrook Engineering and the people or company that Westbrook Engineering are conducting the sale for against any or all claims arising from personal injury and/or property damage created by their actions. This requirement is for Westbrook Engineerings protection - NOT FOR THE PURCHASERS therefore Westbrook Engineering suggests that the purchaser review the insurance policies of the machinery mover regarding the coverage that they have protecting the purchaser and damage or loss of the 
equipment they may be moving for the purchaser.
13)ADDITIONAL TERMS AND CONDITIONS: Westbrook Engineering 
may add other terms and conditions of sale, such additional 
terms and conditions to be announced prior to the auction.
14)RESERVE: Westbrook Engineering reserves the right to 
reject any and all bids. On lots upon which there is a 
reserve, Westbrook Engineering, shall have the right to bid 
on behalf of the seller.
15)CONSENT TO SUIT IN MICHIGAN: The buyer acknowledges that 
this agreement shall be interpreted in accordance with the 
laws of the State of Michigan, and shall bind and inure to 
the benefit of the parties hereto, their respective heirs, 
executors, administrators, successors and assigns. The 
exclusive venue for any controversy or claim between the 
parties will be Macomb County, Michigan.

 

See Full Terms And Conditions

Tags: Craftsman, Wet Dry Vacuum, Vacuum