Refine your search
Primary Category
Category
Brand
Item Type
- Furnace (31)
- Die Casting Machine (28)
- Spindle (26)
- Die (24)
- Lathe (15)
- Turning Center (10)
- Filtration System (9)
- Motor (8)
- Ballscrew (7)
- Bolts (7)
- Clamp (7)
- Cable (4)
- Milling Machine (4)
- Connector (3)
- Indexer (3)
- Oven (3)
- 4th Axis (2)
- Drilling Machine (2)
- Mill (2)
- Servo (2)
- Servo Motor (2)
- Socket (2)
- Stripper (2)
- Telescope (2)
- Tool Changer (2)
- Valve (2)
- tool (2)
- Actuator (1)
- Bearing (1)
- Blast Machine (1)
- Blaster (1)
- Breaker (1)
- Cash Register (1)
- Circuit Breaker (1)
- Collet (1)
- Coupling (1)
- DIN Rail (1)
- Drill (1)
- Drill Head (1)
- Fuse (1)
- Gasket (1)
- Leak Tester (1)
- Machine Part (1)
- Phone (1)
- Pickup Truck (1)
- Plate (1)
- Rectifier (1)
- Regulator (1)
- Robot (1)
- Sensor (1)
- Sign (1)
- Solenoid Valve (1)
- Sprocket (1)
- Starter (1)
- Tong (1)
State/Province
Town/City
- List
- Grid
-
179 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
BID QUICKLY. LOTS ARE STAGGERED TO END EVERY 60 SECONDS WHEN AUCTION BEGINS CLOSING AND WILL BE EXTENDED BY 7 MINUTES FROM TOP BID.
INVOICE AND PAYMENT
YOU WILL RECEIVE AN INVOICE AT THE END OF THE AUCTION BY END OF BUSINESS DAY FOR ANY ITEMS THAT YOU HAVE WON. IT WILL BE SENT TO THE EMAIL IN YOUR...
A $1,000.00 REFUNDABLE DEPOSIT IS REQUIRED FROM ALL BIDDERS WITHOUT SATISFACTORY POSITIVE BIDSPOTTER FEEDBACK AND SUFFICIENT PURCHASE HISTORY. THI...
REGISTRATION APPROVAL
BIDDER REGISTRATIONS ARE USUALLY APPROVED 48 HOURS PRIOR TO AUCTION. IF YOU HAVEN’T BEEN APPROVED BY THEN, FEEL FREE TO REACH OUT.
RIGGING AND REMOVAL INFORMATION
PICKUP / REMOVAL DATES & TIMES: 10/8 - 10/18/2024. PICK UP IS BY APPOINTMENT ONLY, MONDAY-FRIDAY. ALL INFORMATION FOR PICK-UP WILL BE ON THE WINNE...
YOU MAY NEED TOOLS TO PICKUP YOUR ITEMS. WE DO NOT HAVE TOOLS AVAILABLE FOR DISASSEMBLY OF YOUR PURCHASES.
PAY ATTENTION TO ITEM LOCATION
ASSETS ARE LOCATED IN ST MARYS, OH. MAKE SURE TO CHECK ITEM LOCATION BEFORE BIDDING. FOR EXACT ADDRESS PLEASE REFER TO WINNERS EMAIL INVOICE.
GOFF WIRE-MESH SHOT BLAST MACHINE MODEL:WM27.5 -2-40 SN: 08501-50-7290 BELT WIDTH: 24" BLAST ENVELOPE 24"W X 13"H BLAST WHEELS HP(1): 7.5 = 30HP ...
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE
LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE
CAST MACHINE, HYDRAULICS, FURNACE
CAST MACHINE, HYDRAULICS, FURNACE
CAST MACHINE, HYDRAULICS, FURNACE
CAST MACHINE, HYDRAULICS, FURNACE
CHIRON-WERKE MODEL: WM-05 SN:153-67 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLTAGE: 400V CONTROL VOLTAGE: 230/24V RATING: 40KVA RATED CURRENT:...
2008 GOFF SHOT BLASTER MODEL: WM27.5-2-40 SN: 08501-50-7290 VOLTS: 460 PHASE: 3 FQ: 60 LARGEST MOTOR AMP RATING: 23 F.L. AMPS: 63 DISK AMP RATING...
KOKUSAI BALANCING AND RUNOUT MACHINE: FDRB-1642W SN:460-0990 VOLTS: 480 PHASE: 3 FREQ.: 60 FULL LOAD: 63.5 AMPS: 51KVA LARGE MOTOR OR LOAD: 45 AM...
KOKUSAI BALANCING AND RUNOUT MACHINE: FDRB-1642W-H SN:390-1600 VOLTS: 480 PHASE: 3 FREQ.: 60 FULL LOAD: 63.5 AMPS: 51KVA LARGE MOTOR OR LOAD: 45 ...
NAGAHAMA-SCHENCK BALANCE AND RUNOUT MACHINE
OKUMA MODEL: LAW-2S SN: 2241 SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT....
CHIRON-WERKE MODEL: WM-02 SN:499-37 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLTAGE: 400V CONTROL VOLTAGE: 230/24V RATING: 20KVA RATED CURRENT:...
OKUMA MODEL: LAW-2S SN: 2210 SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT....
CHIRON-WERKE MODEL: WM-02 SN:499-38 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLTAGE: 400V CONTROL VOLTAGE: 230/24V RATING: 20KVA RATED CURRENT:...
OKUMA MODEL: LAW-2S SN: 2255 SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT....
OKUMA MODEL: LAW-2S SN: 2149 SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT....
OKUMA MODEL: LAW-2S SN: 2114 SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT....
OKUMA LAW-2S CNC TURNING CENTER OKUMA MODEL: LAW-2S SN: 2419 SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CU...
OKUMA LAW-2S CNC TURNING CENTER OKUMA MODEL: LAW-2S SUPPLY VOLTAGE: 220/480V PHASE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 19...
OKUMA LAW-2S CNC TURNING CENTER OKUMA MODEL: LAW-2S SN: 10458 SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD C...
CHIRON-WERKE MODEL: WM-05 SN:153-07 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLTAGE: 400V CONTROL VOLTAGE: 230/24V RATING: 40KVA RATED CURRENT:...
OKUMA LAW-2S CNC TURNING CENTER OKUMA MODEL: LAW-2S SN: 2337 SUPPLY VOLTAGE: 220/480V PHASE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CU...
OKUMA LAW-2S CNC TURNING CENTER OKUMA MODEL: LAW-2S SN: 113877 SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD ...
OKUMA LAW-2S CNC TURNING CENTER OKUMA MODEL: LAW-2S SN: 113876 SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD ...