One lot of two ~200 hp motors off of ammonia screw compressors. Turn smoothly. 400V 3ph. Sold AS IS FOB Siloam Springs, AR The "Rigging/Removals" ...

2300 Gal S/S Vertical Tank, 7' dia. x 8'H. Three flanged outlets in 45^: 4", 5", and 6" all 12" from bottom. Female threaded 2.5" dia. port 6" fro...

Dual 300 gal Brine mix tanks with mounts for Hi-Shear and Suspension agitators. 2/3 jacket rated at -20^F @ 200 psi. Tank ID is 39"Dia x 51" Strai...

Lot of two Centrifugal Air Foil Fans for rooftop applications. Made by Acme Engn. of Muskogee OK. One fan has 21" x21" flanged mounting and is 31"...

Line Feed Hopper Conveyor. Receiving Hopper is 36" x 36" x 42"D. Approx. 1500 lb capacity. 22" L x 10"wide opening at bottom for product to fall o...

Fortress Metal Detector, with above belt opening 17.5"W x 6.5"H. Stealth Touchscreen Controls. No belt. 1hp 208-230/460V to S/S right angle gearbo...

Fortress Metal Detector, with above belt opening 20"W x 8 5/8""H. Stealth Touchscreen Controls. With belt. 1hp 208-230/460V to S/S right angle gea...

Paw Picker. No dataplate. Appears to be Cantrell. Used to remove feathers from chicken paws. Barrel is 6' x 15.5" Dia. No dataplate on motor but a...

Spiral dewattering reel. 80" dewatering section plus 28" solid outfeed section. Needs new motor assembly. OD = 112" x 45" x 80"H, Sold AS IS FOB S...

Back-to-back Wing "KFC" saws on single stand. With three outfeed chutes per saw. Each has E-Stop and S/S .75 hp 1525 rpm motor direct to blade. 1p...

Back-to-back Wing "KFC" saws on single stand. With three outfeed chutes per saw. Each has E-Stop and S/S .75 hp 1525 rpm motor direct to blade. 1p...

Back-to-back Wing "KFC" saws on single stand. With three outfeed chutes per saw. Each has E-Stop and S/S .75 hp 1525 rpm motor direct to blade. 1p...

Back-to-back Wing "KFC" saws on single stand. With three outfeed chutes per saw. Each has E-Stop and S/S .75 hp 1525 rpm motor direct to blade. 1p...

Line Feed Hopper Conveyor. Receiving Hopper is 8' x 64" x 36"D. ~ 4000 lb capacity. 17.5" wide cleated belt with 4" cleats on 12" centers. 2hp 208...

Baader Johnson Scalder. 4-Pass. Model: BA-1189. 30'L. With S/S overhead rail. Tank is 29.75'L x 37.75"W X 36.5" d. Working well when plant moved p...

Baader Johnson Scalder. 4-Pass. Model: BA-1189. 30'L. With S/S overhead rail. Tank is 29.75'L x 37.75"W X 36.5" d. Working well when plant moved p...

Baader Johnson Scalder. 4-Pass. Model: BA-1189. 30'L. With S/S overhead rail. Tank is 29.75'L x 37.75"W X 36.5" d. Working well when plant moved p...

FPEC ~10,000lb Line-Feed Hopper or Vacuum Tumbler Unload Hopper Conveyor. Hopper is 16' x 48" (Tapering to 20'W over 64" drop) x 64"D. Load at 84"...

Petfood Incline Conveyor. S/S bed, hopper and frame with plastic cleated belt and painted C/S cover. Hopper is 40" x 26" x 21"D. Conveyor belt has...

Boldt Pallet Washer. Self contained with electrical heat, solution mix and airknife H2O blowoff. 3 rows of high pressure nozzels each sides. C.A.T...

S/S Work Platform. Platform is 48" x 36" at elevation of 40". 4-step access with 9" rise per step. Fibergrate step in good condition. Spring loade...

Cram-A-Lot Trash Compactor. Mdl: CO-02. S/N 416. With infeed hopper S/N: E6972. Hopper is 90" x 68" x 44"D. Compression body is 112" x 62" x 30"D....

SANIMATIC automatic smoke house cart washer. With A/B PLC controls in S/S cabinet. S/N 66291116567. Mdl: RACK-S-57-P-5T. Floor has 174"L x 8" wide...

Blue Belt 12" wide conveyor, 15.5' L. .5hp 208-230/460V motor to S/S Gearbox. With starter panel and On/Off. OD = 15'8" x 35" x 43"H. Sold AS IS F...

Blue Belt 12" wide conveyor, 12.5' L. .5hp 208-230/460V motor to S/S Gearbox. With starter panel and On/Off. OD = 13' x 26"" x 32""H. Sold AS IS F...

Vertical S/S Tank, with cone bottom. Was used to pump meat slurry. ~15,000 lb capacity. (~2500gal). 10' straight side. 5' cone. 70"dia. 8" Center ...

S/S Safety Ladder with top platform. Gripper rungs. First 7.5' has no guard. Next 11'5" has oval guard. 48" x 36" top platform with 42" rails. Wit...

Frick 4-Fan Evaporator. Mdl: ALCB 4-1211-0-3-2-LTB. Ammonia coil column 27.3 Cu'. Fans are 40" dia. Driven by 2hp 460V 1200 rpm motors. Clean unit...

S/S Liver/Heart/Gib Chiller. Ammonia Cooled. Stamped for 250psi at 500^F and -20F at 250PSI. 2.5" dia tubes 236"L. OD = 253" x 59" x 58"H. Sold AS...

Lot of four pallets of 1"H welded grating. Two pallets are cut to floor-gutter width of 15" wide by varying lengths. Other two pallets are larger ...

Space saving S/S In-Floor (floor level when retracted; walk and drive over) Ergonomic Pallet lift. Rises to approx. 40". Mdl: SSLSH572. S/N 875712...

Trim Conveyor. 6-Station each side. Dual top level 12" belts circulates product in U-pattern. Inflow and exit have station for QC inspector. Ea st...

1 Lot of 24" x 24" 90^ sheet metal ductwork. Unused. 9 pieces. Input side has 4.5" flange. Output has 1"rolled flang and covered by 1/4" wire scre...

S/S 3" ball valve with sanitary T and long 90^ on opposite sides. Valve stamped 1000WL CFSM. Sold AS IS FOB Siloam Springs, AR The "Rigging/Remova...

Pack-Off Conveyor. Four position, two each side. Bagged product circulated on parallel, opposite flow, 8" top conveyor belts. Four platforms for e...

S/S Work Platform. Platform is 60" x 36" x 42" elevation. Adjustable foot pads. 42" safety rails three sides. W bracket for mounting controls. 5-s...

Two person Pack-Off Conveyor. Bagged product comes in on top 12" conveyor. Workers drop into box on solid S/S table and when box is full move to r...

10" Ingersol Rand Diaphragm Pump. 1 3/4 " In and out. Mdl: 66250/L22-0. S/N GD108 4060. OD = 21 x 17 x 28"H. Sold AS IS FOB Siloam Springs, AR The...

Mini Hydraulic Power Pack. 1hp 208-230/460V motor. S/S Hydraulic tank is 24" x 8" x 6"H. With controls and On/Off. On pallet. Sold AS IS FOB Siloa...

Lewis Food Systems blade sharpener. Mdl CBS. S/N 199. 1.5hp 115V 208/230. 1ph. Dual sharpening stones. OD = 36" x 28" x 24"H. Sold AS IS FOB Siloa...

12" x 11'L S/S Conveyor. In at 12"elevation. Out at 57". S/S angle construction. Vertical 6"H UHMW center divider splits product stream length of ...

36" Flattener. Appears complete with extra belt. 26"L top press conveyor. Bottom conveyor is 82". With 4 screw jacks to adjust product thickness. ...

Baader Johnson lSizer/Grader. Product is fed over parallel 21"L in-motion weigh belts and then moves down parallel 234"l 9"W belts past 8 flipper ...

17"W x 17'L S/S conveyor with light-gray belt and 6" Sidewalls. 1 HP 208-230/460 V Motor and Drive. OD = 211 x 35 x 46"H. . Loaded on flat bed tru...

Work Stand with Green Fiber Grate. 1-step. Stand is 5' x 23"w. Step has 9" rise. Single 42"H rail. OD = 68" x 25" x 63.25"H. Sold AS IS FOB Siloam...

C.A.T. Tumbler Chiller. With 1/3 jacket for atmospheric use of chilled water or glycol. 3 full length 9" paddles mounted on 7" diameter shaft. End...

S/S Roller Conveyor, 49.5" with 18" rollers. 10 rollers on 5" centers. OD = 49.5" x 22.5" x 19.5"H. Sold AS IS FOB Siloam Springs, AR The "Rigging...

Pump Control Cabinet on Stand. Box is 30" x 30" x 12"D. Was used to pump H2O from Plate Chiller to use location. ON S/S 40" x 40" stand. With Manu...

Lot of (3) Flat-to-Incline conveyors. Input at 24"; discharge at 54". Flat is 12"- Incline is 69". With .5hp 1765rpm motor to S/S 40:1 reducer. Wi...

Lot of (3) Flat-to-Incline conveyors. Input at 24"; discharge at 54". Flat is 12"- Incline is 69". With .5hp 1765rpm motor to S/S 40:1 reducer. Wi...

S/S Roller Conveyor. 12' L x 18" wide rollers. Angle frame. OD = 141 x 37 x 35"H. Sold AS IS FOB Siloam Springs AR The "Rigging/Removals" Tab belo...

Lot of 4 12V Pallet Jack Chargers. GENERAL BATTERY. Mdl" SCI-12-550. 550 Amp Hours. Charge time 8 hours. 208-230/460V. OD or Ea. = 25' x 18.5' x 2...

6'L x 24"W Workstand with green fiber grate platform. With 41.5"H rails on one side. Footpads adjust platform elevation from 7" to 12". OD = 72.75...

Back-to-back Wing "KFC" saws on single stand. Each has E-Stop and S/S .75 hp 1725 rpm motor direct to blade. 1ph, 115/208/230V. OD = 44" x 19" x 5...

Back-to-Back S/S Rework station with H2O fittings for inside and outside washing. With hinged flip up grate. 2.5" Drain each side. Each work area ...

Pallet of three shackle line unloaders. 18"dia drive sprocket with cogs on 6" centers. Vertically adjustable. SOLD AS IS FOB Siloam Springs, AR Th...

Carcass breaker. Hammers are 7"l with duck beak configuration. Anvils have 2" openings. Three rows with 7 hammers per row. On hanging roller carri...

MEYN 18-head Fat Puller. Pulls fat from inside the bird's cavity and vacuums it to a collection system. In photo, only one of the heads goes with ...

MEYN 18-head Fat Puller. Pulls fat from inside the bird's cavity and vacuums it to a collection system. In photo, only one of the heads goes with ...

Glycol Chiller shell and tube. Nb# 44028. Manuf. By E.L. Nickell Co. S/S. Rated at 250PSI at 225^F & -20^F at 250psi. S/N 46908. Larger tube is 11...