5 S/S Smokehouse Trucks for 42" Sticks. Built for 4 rows of sticks, each row holding 11 sticks. 13" spacing between rows. OD = 46" x 32.5" x 65.5"...

Lyco 500# Tumbler. Tilt unload. Powerflex Programmable Controller. With onboard Busch Vacuum pump. Static vacuum. 2' x 2' door. Dumps into 36" H V...

Quincy 75hp Screw Air Compressor. MDL: QMA 75WCW11G. S/N: 74051. OD = 113" x 42" x 58"H. Sold AS IS FOB: Prairie Grove, AR. Was in use when plan...

40" W Meat Flattener/Cutlet Former. Unit has bottom and top rubber-belt conveyor. Top belt is 80"L. Bottom belt is 10'L. Top pressure belt is adju...

34"WIDE FLATTENER/CUTLET FORMER. No data plate, but well built. Adjustable, hydraulically driven machine has two screw jacks on each side to adjus...

Disinfectant Dip Conveyor with level-set box on side. Conveyor has 24" wide usable belt with 4" cleats on 24" centers. Infeed and outfeed elevatio...

FPEC Portable Vacuum Pump with multi-voltage motor. 7.3hp or 10.9hp. Mounted on top is Vacuum surge hopper 24"dia x 84" long. With removable clean...

Koch Positrack Labeler. Mdl: ILH1TB12100. S/N 1048. With e-Stop and touch screen controller. Adjustable head. With S/S Electrical control box. 1hp...

Disinfectant or Bio-remdiate Conveyor. Product travels on 12" wide belt with 9.75" product area through 48" L dip (H2O or Bacteriacide) that is le...

Tipper Tie Clipper. Said to be Mdl: 232 14RT. For metal clips. Clipper sits on 19.5" x 14" S/S stand. 27"H clip cartridge. OD = 19.5" x 14" x 35"...

S/S Hopper used to supply a pump via a 6" sanitary ferrule at bottom center of hopper. Hopper is 35"x 35"x 21"D. At outlet hopper is 6" x 6". OD =...

Polyclip EZ-80 Clippers. Require 80 PSI air. Taken apart, needed parts replaced. Tested. Runs well. 30" clip cartridge. Mounts on 1.5" diameter pi...

Polyclip EZ-800 Clippers. Require 80 PSI air. Taken apart, needed parts replaced. Tested. Runs well. 30" clip cartridge. Mounts on 1.5" diameter p...

Two commercial size Culligan Water Softeners w/ Culligan Aqua Sensor Control. 120V controls. OD = 36" Dia x 85" Tall. Location: Prairie Grove, AR....

Lot of two 20 hp motors. Good condition except for fan damage on one as a result of forklift blade. 208-230/460V, 1760 rpm. 52.4-48/24k amp. From ...

15HP Siemens Motor. Used less than one week before being replaced with larger motor. 1770 rpm. 38.5/19.3 amp. 3"L x 1-15/16 shaft turned down to 1...

15HP Siemens Motor. Used less than one week before being replaced with larger motor. 1770 rpm. 38.5/19.3 amp. 3"L x 1-15/16 shaft turned down to 1...

15HP Siemens Motor. Used less than one week before being replaced with larger motor. 1770 rpm. 38.5/19.3 amp. 3"L x 1-15/16 shaft turned down to 1...

15HP Siemens Motor. Used less than one week before being replaced with larger motor. 1770 rpm. 38.5/19.3 amp. 3"L x 1-15/16 shaft turned down to 1...

15HP Siemens Motor. Used less than one week before being replaced with larger motor. 1770 rpm. 38.5/19.3 amp. 3"L x 1-15/16 shaft turned down to 1...

Nord Gearbox in great condition. Designed to couple to 30hp motor. 51:1 ratio. 6.5": x 3.25"dia keyed shaft. Internal gears pictured. OD = 24" x ...

S/S Netting Stuffer for all types of meat and poultry. Large size. Adjustable diameter. With aluminum mounting base. = 30" x 12" x 14"H. New price...

Lot of approximately 125' of new (still in OEM wrap) 5" vacuum loading hose. New price approx. $6000. Offered AS IS FOB: Prairie Grove, AR ($70 wi...

Incline conveyor. 8" wide belt.  Cleats are 3"H with 12" spacing. Sides 4.5"H. Less infeed legs. OD+ 22"120"x73" tall.  Input at 12". Discharge ...

Unused Stein speed adjustment section to create spacing between rows of product.  Add to batter or breader.  Conveyor is 34" W usable by 12".  Hyd...

FPEC New Barrel or Cart dumper. Will receive either 400 or 600 lb cart or a barrel. Pivot dumps at 45". Heavy duty hydraulic cylinder. All S/S/ wi...

.REMOVED FROM AUCTION ...[more]

Ozonice Oxygen production machine. Produces O3 for use in destruction of virus, bacteria and mold organisms. As well it is used for applications, ...

MEYN  (24" wide & 20' L) Thermal Fluid Fryer. All S/S/ With matching Fulton Oil Heater. With hold-down belt and fines removal. System was purchas...

Freon Compressor package consisting of 4 Copeland Coplematic compressors, a control cabinet MDL: with COM TROL touch screen controls. Manufactur...

12"w Product Sort then Elevate Conveyor. 12' L. Conveyor has platform to mount gear motor. Designed with 4) 24" x 12" sort tables with 3.5" x 2.5"...

S/S Separation or Re-work Table with two out-chutes. Table ID 23.5"x 48". Chutes 6" wide. 10" sidewalls. Overall dims 30" x 51" x 43" H. Sold AS I...

Freezer Discharge Slide-Table All S/S. Table top 36" at high end and 19.5" at low end. 41" long slide. OD = 36" x 41" x 37"H. Offered AS IS ...

Marion 150 Cu.Ft. blender. Paddle with close tolerance clearance. Used to blend food grade powers. Tub is 12'L x 42"W x 42" to top of paddles. 52"...

S/S Wire belt transfer conveyor. 69"L x 32" usable. S/S frame conveyor on 8" adjustable locking casters. Square tubing frame. With S/S forklift sl...

Blow off wire belt 28"W Conveyor, 70" infeed section to blow off. 31" Outfeed section from blow off. HD wire belt. Both sections separately dr...

BOC, AIRCO KWIK FREEZE, MODEL KF 21-305, (21"W by 305' active belt) Set up for CO2.  Last use: Bakery application. S/N: 10184, 13'9" x 15' 4" x 13...

Murzan PI 50 PL Diaphragm Pump. All S/S. Rebuilt. Test run and removed. Designed to handle widest array of viscosities and sizes. S/N 93021578. OD...

Macerator parts on S/S wash stand. Includes (A) 1 head with blades and clean out spacers, plus bearing assembly both ends, and (B) 2 heads with ...

Starflex Bagger. Mdl PL-500. All S/S. Adjustable width bag jaws. With dual air filters. With air regulators. With air gauges. Unit was used only 4...

FPEC 1000lb Shaft Load Tumbler. Unit was being rebuilt for customer when project was stopped. All new: shaft load pipe, filter system, motor and ...

Alkar 1-Truck Electric Smokehouse. Sold with two trucks and screens. Offered AS IS FOB: S Central Texas. OFFERED SUBJECT TO OWNER CONFIRMATION OF ...

One lot of 225 Star-shaped Smoke Sticks for smoke trucks which will accommodate 40" smoke sticks. Sticks were originally 42" but now are less. Of...

One lot of 225 Star-shaped Smoke Sticks for smoke trucks which will accommodate 40" smoke sticks. Sticks were originally 42" but now are less. Off...

One lot of 225 Star-shaped Smoke Sticks for smoke trucks which will accommodate 40" smoke sticks. Sticks were originally 42" but now are less. Of...

One lot of 225 Star-shaped Smoke Sticks for smoke trucks which will accommodate 40" smoke sticks. Sticks were originally 42" but now are less. Of...

Belshaw Century 400 Donut Fryer. Electric. 460V. 16" Wide by 8' in oil. Product flipper at 8'. Roller belt with 17" rollers on 3 3/4" centers whic...

5' section of S/S Roller Conveyor. Manuf of open S/S channel. Slots for 14 rollers. 20" wide rollers. OD = 24" x 60" x 26"H. Offered AS IS FOB:...

S/S Gizzard processing station including 4) peelers, 4 rinse heads and 4 compressed air outlets. Driven by 2) S/S 1hp 230/460v 3ph motors. Statio...

Cart Dumper sized to accommodate 600lb Vemag type carts. With hydraulic power pack. Pivots at 57". Carriage is 34.5" wide x 29.5" D. With dual hyd...

Weigh belt for parts. Unused. New scale belt system tested for customer but did not meet requirement. Sold for parts only. Includes NEW: Weight...

Weigh belt for parts. Unused. New scale belt system tested for customer but did not meet requirement. Sold for parts only. Includes NEW: Weightec ...

Trash Pump. 3" x 3". MDL: 301T. Gas motor driven. Manuf by Multiquip. Gas motor is a Wisconsin Mdl: E427W. Unitized on casters frame. OD = 19.5" ...

MTH regenerative turbine pump for low flow high pressure pumping. Standard construction if hard electrolysis nickel-plated cast iron and bronze fi...

MTH regenerative turbine pump for low flow high pressure pumping. Standard construction if hard electrolysis nickel-plated cast iron and bronze fi...

25 Gal portable sprayer with gas engine. Sprayer and engine mounted on rubber tire platform with pull handle. With plenty of hose and spray head. ...

Northfield Film/Crusting freezer designed to crust freeze one side of a product to prevent it sticking to the belt on the spiral freezer. Freezer ...

Automated Stretch Wrap system byARPAC. Model E-Z Load RTAC - 406. Pallets are put on Power roller conveyor which brings them to the wrapper head. ...

Belt length 121" width of belt 12" usable belt 10" gearbox mounting platform 10.5"x 9". diameter of shaft 1.25". diameter of sprocket 4.75". drive...

Robbins Mdl: 1860 Rotary Blancher All S/S. 18' L x 60" diameter. 1995 model. 3HP 208-230/460V motor. S/N: 950106. OD = 21.5' x 106" W x 87" H. Wit...