Macerator/Tenderizer Parts. Macerator parts on S/S wash stand. Includes (A) 1 head with blades and clean out spacers, plus bearing assembly both...

Starflex Bagger - PL 100. 1 Lot of Four (4) Model PL-100 Starflex Baggers. On portable table 28"L x 21"W x 24"H. Baggers are 30"L x 16"W x 16"H. T...

Starflex Bagger - PL 500 Used less than 4 months. Great condition. OD = 45"L x 22"W x 44"H. Offered AS IS FOB Prairie Grove, AR ($80 will be a...

Model PL 500. Used less than 4 months. OD = 45"L x 22"W x 44"H. Offered AS IS FOB Prairie Grove, AR ($80 will be added to your final bid to pa...

Hobart 100lb Mixer/Grinder. Mdl: 4346. 7.5 hp 3ph motor. Electrical controls need to be redone, but otherwise complete. Owner set it aside for pe...

MTH regenerative turbine pump for low flow high pressure pumping. Standard construction if hard electroless nickel-plated cast iron and bronze fit...

MTH regenerative turbine pump for low flow high pressure pumping. Standard construction if hard electroless nickel-plated cast iron and bronze fit...

BRADMAN LAKE TRI-SEAL CARTON CLOSER.  Mdl: Straight Line Compact-3 Lid Closer; COM3-R-W. Right hand machine. Manuf 2004.  S/N: 15708. With Nordson...

BRADMAN LAKE TRAY ERECTOR. Mdl: HS2-60. S/N: 15696.  Mfg: 2004. AB PLC.  S/S Construction.  Owner says unit is ready to work.  Offered Skidded and...

Emery Digital Scale Head. S/S. Mdl 260. In fiberglass enclosure. From plant parts room. Offered AS IS FOB Prairie Grove, AR ($25 will be added ...

Weightronix Scale Head. teichuronic Scale Head. Mdl: WI 130. Up to max 10,000 lbs. 120V. S/S. From plant parts room. Offered AS IS. FOB Prairie ...

Portable Cart Lift. Portable Vemag cart dumper. LH orientation. Locking casters. Adjustable dump from 72 to 92 inches. Currently set for 92" dump...

S/S 2000 lb vats with flat bar lips and legs. Four. ~ ID is 42" x 47" x 35"D. Sold AS IS FOB Prairie Grove, AR. A $20 loading fee, to place ont...

Unused Maxon Air Blower. 6 x 4. Used to feed air to direct-fired fryer burners. From plant parts room. Back-up unit. Never used. 1hp 208-230/460V...

S/S Hartzell Hot Air Fan designed for use with fryer, ovens or smokehouses. MDL: 846 8606. 2hp 2038 rpm delivering 3700 cfm. Fan turns freely. O...

S/S Hartzell Hot Air Fan designed for use with fryer, ovens or smokehouses. MDL: 846 8606. 2hp 2038 rpm delivering 3700 cfm. Fan turns freely. O...

One lot of two STEIN 40" breaders. Can make one good breader from both. Hydraulic with S/S header and flow control valves. Offered AS IS FOB Cus...

Doran 7000XL Scale Head with Totalizer. Totalizer is Rice Lake. 115V. 10,000#Max weight. Tested and works. Offered AS IS FOB Prairie Grove, AR...

VC999 Roll Stock Machine. Mdl: RS420. One, two up or four up configuration. Molds for 4 set ups: 1 x 4 3 7/16" x 12 7/16"), 2 x 3 (5 3/8" x 4 3/4"...

Lot of New 5" Grinder plates and knives. Includes a minimum of 14 plates and 8 knives. Offered AS IS FOB Prairie Grove AR ($10 will be added to yo...

MTC 16" Screw Loader. Approx. 2500 lb. hopper. In feed at 55". Discharge at 60". Partial safety grate on hopper and partial hinged solid lid on ...

CAT Vacuum Feed Hopper slopes to 3" sanitary outlet. Hopper is 104" x 60" x avg. 30"d. On adjustable foot pads. If needed, can lower hopper by 22"...

Prime Equipment Dual Blade Turkey Carcass Cutter.  This machine is that last piece in a Prime Turkey Deboning line and was used to downsize carcas...

BULK BID: Complete DAPEC Turkey Thigh Deboning Line Mdl:STDK 0076. Including 1) Cleated incline whole-thigh infeed conveyor, 1) Dapeck automated d...

Dapec Turkey Thigh Deboner Mdl: STDK 0076 including the portable rack, push rod assemblies, whole thigh infeed section and work stand section with...

Lightnin Mixer. MDL X5P33. Motor is .33 hp 208-230/460v 1725 rpm. With adjustable tank mount. Shaft has S/S propeller is 92" long from hub to ti...

SOCO Case Taper. SOCO S/S Top and Bottom CASE TAPER. With adjustable side drive belts. Electric. 110/115 V, 1ph. Perfect for the single phase pla...

Patty-O-Matic Mdl: 230A. Stacks patties perfectly. Counter top ready. Quick disassembly for easy cleaning. Molding capabilities same as larger u...

AmeriPak 145 Tray Sealer. Ameripak Filled Tray Sealer, Model 145. OEM rated at up to 30 trays per minute depending on tray size, material, and fee...

Strip Cutter or Dicer. Chinese built compact unit accepts chunk boneless meat into the front rotating chamber. Meat is sliced into (current setti...

Great Midwestern Sifter, Tru-Balance. S/S. 36" Dia. Totally enclosed, 3 deck. Air cylinder opener. Mdl: 611/3. Type TB. Sold with pallet of parts ...

Kentmaster Splitting Saw. Kentmaster Model 75 Carcass Splitting Saw. 220V 3ph. New bearings and new Rotor shaft. 49" L x 16" W x 19" H. Blade Op...

Ultra Filtration System - Unitized. 25GPM. Consisting of two 30gal vessels, a 1hp 115/230v centrifugal pump, 4" x 40" Koch Cartridge Vessel. (repl...

Lightnin Mixer. MDL X5P33. Motor is .33 hp 208-230/460v 1725 rpm. With adjustable tank mount. Shaft has S/S propeller and is 92" long from hub t...

Twin Shell Lab Mixer. Small production or Lab application. With 5 interchangeable shells of different capacity. Mixer is designed to mix dry-to...

Hopper Incline Conveyor, less drive and belt. Includes idler assembly.  Hopper is approximately 3000# capacity.  All S/S. Hopper Dims are 72" x 32...

JUST ADDED: Sorting Conveyor with center belt taking product opposite way of two side belts where workers stand and sort.  No belts or drives on s...