BAC Condensing Tower. Sized for larger spiral freezer. MDL 2844K. S/N: 90100684. With 48" Side mounted fan driven by 10hp 208-230/460V motor. Incl...

JV 22' Roll Off Trash Compactor with 10.5" Infeed section.  Unit needs to be moved from doorway to convert to product dock. Manufactured 2010. S/N...

15HP Hydraulic Power Pack with starter box and push button controls. ~14gpm pump. 18" x 30" x 13"H tank. Offered AS IS FOB ENID OK.  A $50 palleti...

Laitram PRG (Precision Roller Grader) Food Grader. Used for Shrimp, Wings, Nuggets etc. to produce a narrow range of product sizes, per customer...

Fines Separator. 18" wide wire belt takes product across two "thumper" shafts. Pieces that are small enough to fall through the belt drop down to...

Stainless Breading or Batter Flour Feeder with blue plastic belt. 24"W Belt has 3/4" high cleats on 10" centers. With belt tensioner assembly. V-s...

All S/S Breading or Batter Flour Feeder with 27" x 21" V-hopper, 18"D at deepest point. 20" wide S/S belt. Hydraulically driven. On adjustable cas...

S/S 600 Gallon tank w/3 HP SPX Lightnin Mixers Straight wall is 60". 54"ID. This lot is for one tank only! Bottom dish is 5"D. 2" Flanged CBO. 2.5...

S/S 600 Gallon tank w/3 HP SPX Lightnin Mixers Straight wall is 60". 54"ID. This lot is for one tank only! Bottom dish is 5"D. 2" Flanged CBO. 2.5...

27'L S/S Ossid Weigh Separator Conveyor. Flippers are 6"H x 24"L and are positioned on 36" centers. Total of 8 flippers feed 18" wide chutes. Off...

S/S Table 8' x 40" x 28"H. Offered AS IS FOB Atkins, AR. A $ 35 loading-only charge will be added to your invoice for loading on your trailer. If...

S/S Table 8' x 40" x 31" to top of table. 37.5" OH. Offered AS IS FOB Atkins, AR. A $ 10 loading-only charge will be added to your invoice for lo...

S/S Table with meat lug rack on each end. Rack holds three lugs. Table is 8'L x 32"W x 34.5" to top of table. With wash-gap sidewalls on 4 sides. ...

S/S Table with meat lug rack on each end. Rack holds three lugs. Table is 8'L x 32"W x 34.5" to top of table. With wash-gap sidewalls on 4 sides. ...

S/S Table 44" x 26" x 37"H. With 2nd shelf. Offered AS IS FOB Atkins, AR. A $10 loading-only charge will be added to your invoice for loading on ...

S/S Table 48" x 24" x 37"H. With 2nd shelf. Offered AS IS FOB Atkins, AR. A $10 loading-only charge will be added to your invoice for loading on ...

S/S Table 44" x 28" x 40"H. With 23" backsplash. Offered AS IS FOB Atkins, AR. A $ 10 loading-only charge will be added to your invoice for loadi...

S/S table 24" x 27" with single lub platform on one side. Platform is 24" x 14.5" x13"H. 1" lip around table top. Offered AS IS FOB Atkins, AR. ...

Prime Wing Segmenter Mdl: CWS-S/N . S/N CWS - TJ-1106 7' layon area. 1.5" spacing. OD = 11'7" x 2'2" x 5'2" H. Missing part of one leg . Offere...

S/S Table with meat lug rack on each end. Rack holds three lugs. Table is 8'L x 32"W x 34.5" to top of table. With wash-gap sidewalls on 4 sides. ...

S/S Table 27" x 24" x 29"H. Offered AS IS FOB Atkins, AR. A $ 10 loading-only charge will be added to your invoice for loading on your trailer. I...

S/S table. 55" x 16" L x 37"H. Offered AS IS FOB Atkins, AR. A $ 10 loading-only charge will be added to your invoice for loading on your trailer...

2-Way Conveyor. 12" Wide belt. Total Length = 8'8". Each conveyor half has 42" L belt. With 3" UHMW sidewalls. No motor. OD = 8'8" x 20"W x 40"H. ...

60HP Hydraulic Power Pac. Bosch hydraulic pump #: 0513850214. With Filter tower, heat exchanger and control Panel . OD = 5' x 36" x 80"H. Offered ...

Bohn Compressor, unitized with two 16" fans and Coplematic DISCUS Freon MDL: 3DA#-0600-TFC-80C. S/N CT 93J03721S. In 47" x 35" x 34"H Alum box. Bo...

BandRite 6000 Sealer. Vertically adjustable over a conveyor. On casters. OD = 61" 34" 66"H. Offered AS IS FOB Atkins, AR. A $ 50 loading-only ch...

Marel Strip Cutter Mdl STC S3. Can be set up with multiple blades. This machine was set up to split breast lobes 2 at a time. 24" wide product ar...

Tub Washer with S/S Chain. Pump Motor is 7.5HP 208-230/460V. OD= 12"l x 49" w x 92"H. Offered AS IS FOB Atkins AR. A $ 50 loading-only charge will...

Metal Detector with 14"W x 4 5/8" H opening above belt. 65" L x 11.75"w Intralox conveyor belt. Manufactured by Schneider Packaging of NY. MDL: ...

Metal Detector with 14"W x 4 5/8" H opening above belt. 65" L x 11.75"w Intralox conveyor belt. Manufactured by Schneider Packaging of NY. MDL:...

RBI Industrial Hot Water Heater, MDL: 8600.Natural Gas. Max 160 PSI. 763 BTU/Hr Recovery Capacity. 840,000 BTU In. MDL: 33HW0840NEOASPS. S/N 0502...

Strip Cutter, less blades and blade guide roller 10.5"W product feed area. Flattener roller before cutting box. 12"W belt. Belt motor is 1.5HP 20...

S/S Walkover is 36" wide and has two steps up to 54" x 36"W platform. 8" rise on steps. 27" clearance. Railings are 42"H. OD = 95" x 39" x 67.5"h...

80"L Flat Conveyor, 24" W. With Intralox Belt. 6" Sidewalls. 1hp 208-230/460V SS Motor and gearbox. On casters. OD = 85" x 41" x 54"h. Offered AS ...

WE Plemmons Box Former with Nordson 2302 SD Bottom Gluer. Gast Vac pump on the cardboard blanks feed system. Frain Control box. 240V 3ph. With saf...

Titan Mdl: 149 Injector with two sets of needles, different sizes. With Intralox belt. With separate Strainer assembly. With spare head assembly. ...

Carruthers Autoslicer Mdl 5100 with both strip cut and cross cut assemblies. S/N 51401. With adjustable hold town belt assembly. Belts look unused...

Sizing conveyor. Dual Lane. With 8) 17" L Flippers on each side. Flippers Feed 22" x 8" Chutes with UHMW airgate bottoms which discharge at weight...

S/S Table. 63"L x 45"W x 30"H. With adjustable foot pads. Offered AS IS FOB Atkins, AR. A $ 10 loading-only charge will be added to your invoice ...

S/S deicing station. S/S deicing area is 23" x 29". OD = 38 x 32 x 57"H. With tilt receiving bracket for hand totes. Offered AS IS FOB Atkins A...

Fabco S/S deicing station. S/S deicing area is 34" x 48" x 55" H. OD = 38 x 32 x 57"H. With tilt receiving bracket for hand totes. With drain f...

Loveshaw Little David Labeler MDL: LS500. On vertically adjustable castored frame with conveyor. With varidrive. Offered AS IS FOB Atkins AR. A $...

201" long line. Cones stand 13.75"h on 11" centers. Driven by 1hp S/S motor and S/S drive. 208/230V 3ph. Control box has start/stop and e-stop. ...

14 Bucket Eagle Scale with Dimpled buckets and slides and spare parts in plastic covered totes on sides. On pallets. Offered AS IS FOB Atkins AR....

Dual lane incline conveyor. 2) 6" wide Intralox belt conveyor. Infeed at 36" out at 80". Driven by 1hp 208-230/460 S/S motor to S/S gearbox. OD ...

Wash Table with perforated base. On casters. With 6" sidewalls. OD = 96" x 24" x 31"H. Offered AS IS FOB Atkins AR . A $10 loading-only charge ...

CorVac snorkel Vacuum Bagger. 52" Seal bars. S/N 811. OD= 5' x 36" x 68"H. Offered AS IS FOB Atkins AR. A $25 loading-only charge will be added...

Prime Breast Sizer Portioner. Compact design. Made for 8lb birds. Breast is forced into pockets and then cut with reciprocating blade. Custom pock...

Prime Breast Sizer Portioner. Compact design. Made for 8lb birds. Breast is forced into pockets and then cut with reciprocating blade. Custom pock...

S/S Spiral Freezer CIP Heat Exchanger/Distributor. Designed for and used with Spiral Freezer with 10 valves directed at 10 separate levels of belt...

Lot of 2 Aluminum Powder Filter boxes. ID = 22" x 22" x 30"D. OD = 25" x 25" x 30"H. With dual outlet valves on each unit. Offered AS IS FOB Atkin...

Brine filter with 10HP pump. Used with Injectors. OD = 80" x 21" x 30"H. Included filer and float tank on pallet. Offered as is FOB Atkins AR. A ...

Marel Single Feed product singulator. Used for Nuggets and tenders. Less belts. With controls. High speed vacuum product transfer of single produc...

S/S Table is 8.5' L x 32"W x 55 high to top of crossover bar. Table top is 32"H. Offered AS IS FOB Atkins AR. A $10 loading-only charge will be...

Automatic Digital Weigh Checker by Ishida. Two belts on weigh cells. One belt is 17"L. Other is 21"L. both 15.75"W. Touch controller. OD= 40" x 30...

Hotsy Hot Water Washer consisting of gas heater unit and Pump unit. Pump is MDL 1724. 2000 psi 3.9gpm at .06 nozzle size. On two standard pallets...

26'L Incline Conveyor. 18" wide. With 18"W introlox belt on pallet and on conveyor. One 207" section and one 105" section. Bolt together flanged c...

19'L x 28" Wide conveyor. Intralox belt. OD = 19'3" x 50"W x 70"H. 2" sidewalls. With control box. Less motor and gearbox. Offered AS IS FOB At...

24" W incline conveyor. Less Motor/Gearbox/Intralox Belt. Input at 32". Discharge at 58". Adjustable foot pads. With belt rails below and with dri...

12' x 27" Wide Conv Frame. UHMW rails and nose plate in good condition. Idler and drive in good condition. Less motor and gearbox and Intralox bel...