Refine your search
Primary Category
Category
Brand
- Milwaukee (15)
- Fanuc (7)
- Traub (7)
- Waukesha (7)
- Allen Bradley (4)
- Bradley (4)
- Hardinge (4)
- LNS (4)
- Mayfran (4)
- Watlow (3)
- Carrier (2)
- Chip Blaster (2)
- Emag (2)
- HP (2)
- Junker (2)
- Koolant Koolers (2)
- MORI (2)
- Makino (2)
- Mori Seiki (2)
- Okuma (2)
- Reinecker (2)
- Wisconsin (2)
- ABB (1)
- Brother (1)
- Cincinnati (1)
- General (1)
- Global Finishing Solutions (1)
- Hess (1)
- Industrial Air (1)
- Mae (1)
- Mattison (1)
- Minster (1)
- Mitsui (1)
- Mitsui Seiki (1)
- Nordson (1)
- Omron (1)
- Prawema (1)
- Ravensburg (1)
- Sunnen (1)
Item Type
- Spindle (22)
- Chip Conveyor (15)
- Lathe (15)
- CNC Lathe (11)
- Chuck (6)
- Grinding Machine (5)
- Turning Center (5)
- Feed (4)
- PanelView (4)
- Parts Washer (4)
- Taper (4)
- Bar Feed (3)
- CNC Machining Center (3)
- Collet (3)
- Grinder (3)
- Heater (3)
- Horizontal Machining Center (3)
- Machining Center (3)
- Press (3)
- Tank (3)
- Cabinet (2)
- Chiller (2)
- Cylindrical Grinder (2)
- Honing Machine (2)
- Hydraulic Press (2)
- Motor (2)
- Bar Feeder (1)
- Blower (1)
- Control Panel (1)
- Dresser (1)
- Feeder (1)
- Hydraulic Power Unit (1)
- Live Center (1)
- Oil (1)
- Oil Skimmer (1)
- PLC Control (1)
- Paint (1)
- Paint Booth (1)
- Power Unit (1)
- Robot (1)
- Servo (1)
- Spray Booth (1)
- Straightening Press (1)
- Surface Grinder (1)
- Tool Changer (1)
- Transformer (1)
- Wash Station (1)
State/Province
Town/City
- List
- Grid
-
48 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Traub TNC 42-65 CNC Lathe, Max Turning Length 17.71", Diameter in Front Bearing 4.33", X Axis Slides S1 and S2 Feed Travel 5.51", Z Axis Slides S1...
Traub TNC 42-65 DGY CNC Lathe, Main and Sub Spindles, Upper and Lower Turrets, Chip Conveyor, Equipped with Traub TX 8H CNC Control, S/N 887 [2001...
Traub TNC 42/65 DGY CNC Lathe, Model , Main and Sub Spindles, Upper and Lower Turrets, Chip Conveyor, Equipped with Traub TX 8F CNC Control, S/N 7...
Traub TNC 42-65 DGY CNC Lathe, Main and Sub Spindles, Upper and Lower Turrets, Chip Conveyor, Equipped with Traub TX 8F CNC Control, S/N 555 [1997...
Traub TNC 42-65 CNC Lathe, Max Turning Length 17.71", Diameter in Front Bearing 4.33", X Axis Slides S1 and S2 Feed Travel 5.51", Z Axis Slides S1...
Traub TNC 42/65 DGY CNC Lathe, Main and Sub Spindles, Upper and Lower Turrets, Rear Exit Chip Conveyor, Equipped With Traub TX 8F CNC Control S/N ...
Traub TNC 42/65 DGY CNC Lathe, Traub TX 8F CNC Control, S/N 303 [1995] NOTE: MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLED WAREHOUSE IN M...
Okuma LFS10-2SP Twin Spindle/Twin Turret CNC Turning Center, 15.7" Swing Over Bed, 4.72" Max Turning Diameter, 3.14" Max Turning Length, 1.57" Bar...
Okuma LFS10-2SP Twin Spindle/Twin Turret CNC Turning Center, 15.7" Swing Over Bed, 4.72" Max Turning Diameter, 3.14" Max Turning Length, 1.57" Bar...
Minster E2-1000-144 Hevi-Stamper Two Point Eccentric Shaft, Progressive Die Press, 1000 Ton, 144” x 60” Bed and Slide Area, 8” Stroke, 6” Slide Ad...
Cincinnati Avenger 250S CNC Slant Bed Turning Center, 12-Position Turret, Sub-Spindle, Acramatic 850SX CNC Control, Jorgensen Chip Conveyor, 460/3...
Automated Finishing Model 4078 Automatic Conveyor Parts Washer, 11" Conveyor Width, Approx 14"x 8" Parts Window, Wash and Blow-Off Cycles, Wash Ta...
Automated Finishing 2V5 Vibratory Finishing Machine, 36" x 12" x 16" 4-Section Vibratory Chamber, Pneumatic Actuated Door, Control Panel with Omro...
Automated Finishing Model 3905 Parts Washer, 25 "x 15" Parts Tray Loader, 30" x 18" Doorway, Pneumatic Actuated Door, Wash Tank with Watlow Electr...
Junker Jumat 5002/50 CBN CNC Shaft Grinding Machine, Fanuc Series 16 CNC Control, Automatic Loading Chain Cycle Conveyor, (2) HF Spindle Units, B-...
Junker Jumat 5002/50 CBN CNC Shaft Grinding Machine, Fanuc Series 16 CNC Control, Automatic Loading Chain Cycle Conveyor, (2) HF Spindle Units, B-...
Cole-Tuve Model CF-110 C-Frame Hydraulic Press, 110 Ton Capacity, .25"-11.8" Adjustable Stroke, 7.88" Max Shut Height, 19.6" Daylight (Max Opening...
DeHoff/ Kays Engineering 518T Gun Drilling Machine, 1/2" Diameter Mild Steel Drill Capacity, (2) Drill Heads, (4) Spindles, 18" Drill Stroke, 0.1-...
Mayfran ConSep 2000 Chip Conveyor with Coolant Tank & Pumps P51.04M6658.01, 90" x 34" Collection Area, 17' Span Before Neck, 20" Height Along Span...
Mayfran ConSep 2000 Chip Conveyor with Coolant Tank & Pumps P51.04M6658.01, 90" x 34" Collection Area, 17' Span Before Neck, 20" Height Along Span...
Koolant Koolers Model HCV 1500-PR Chiller Compressor NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLED WAREHOUSE IN WAUKESHA, WISC...
Automated Finishing PW-24-S Parts Washer, Approx. 18" Wide Belt Parts Conveyor, Approx 10" x 18" Parts Window, Timer, AFS Industrial Air Cleaner, ...
Koolant Koolers Model HCV 1500-PR Chiller Compressor NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLED WAREHOUSE IN WAUKESHA, WISC...
Shielded Drive Isolation Transformer 27 KVA NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLED WAREHOUSE IN WAUKESHA, WISCONSIN LOA...
Brother TC-321 CNC Drilling & Tapping Center, Travels: X-27.55", Y-11.81", Z-9.84", 31.49" x 11.81" T-Slotted Table, 10-Position Tool Turret, 6-60...
Emag Reinecker VSC-250-DDS CNC Vertical Hard Turning and Finish Grinding Machine, S/N M762.56847
Emag Reinecker VSC-250-DDS CNC Vertical Hard Turning and Finish Grinding Machine, 9.84" Max Chuck Diameter, 10.23" Max Swing, 3.46" X-Travel, 7.87...
Emag Reinecker VSC-250-DDS CNC Vertical Hard Turning and Finish Grinding Machine, 9.84" Max Chuck Diameter, 10.23" Max Swing, 3.46" X-Travel, 7.87...
Mitsui Seiki HU50A CNC Horizontal Machining Center, Fanuc Series 15-M CNC Control, Travels: X-28.34", Y-27.55", Z-25.6" Table to Spindle Range: 3....
Anderson Cook 350 Hydraulic Cold Roll Spline Roller, 56" Stroke, 48" Max Rack Length, 4.75" Max Rack Face Width, 2.5" Max Part Diameter, 16/32" Ma...
Sunnen KGM-5000NTE-S3 Horizontal CNC Honing Machine, 0.31-5.90" Workpiece Capacity, 4.4 LB Max Workpiece Weight, 250-3700 RPM/20-1000RPM Spindle S...
100" Mattison Type 100C 5-Spindle Rotary Surface Grinder, 100" Table Diameter, (5) 40 HP Spindles, 16" Range of Work with Fixtures, 20" Wheel Diam...
Hess-Mae M-AH-40RH-750 Automatic Shaft Straightening Press, 40-Ton Straightening Force, 29.5 Max. Width Between Centers, Infeed and Exit Conveyor,...
Hardinge Quest 8/51 CNC Lathe with Live Milling, 20.4" Swing, 12.1" Max. Turning Diameter, 7.4" X-Axis Travel, 24" Z-Axis Travel, 2.3" Spindle Thr...
Hardinge Conquest 51 CNC Lathe with Live Milling, Model CS-51, 26" Swing Over Ways, 6.75" X-Axis Travel, 22.87" Z- Axis Travel, 630 IPM Rapid Trav...
Hardinge Conquest 51 CNC Lathe with Live Milling, Model CS-51, 26" Swing Over Ways, 6.75" X-Axis Travel, 22.87" Z- Axis Travel, 630 IPM Rapid Trav...
LNS QLS80 S2 Quick Load Servo Barfeeder, 1/4" to 3-1/8" Bar Diameter, 14" to 63" Length Capacity, S/N 27325401 [2019] NOTE: THIS MACHINE HAS BEEN ...
Hardinge Conquest 51 CNC Lathe with Live Milling, Model CS-51, 26" Swing Over Ways, 6.75" X-Axis Travel, 22.87" Z- Axis Travel, 630 IPM Rapid Trav...
LNS Bar Feed
LNS Bar Feed NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLED WAREHOUSE IN WAUKESHA, WISCONSIN LOADING CHARGE: $250
Mori Seiki SL303A/700 CNC Turning Center, Equipped with MSG501 CNC Controls, Mayfran Consep 2000 Chip Conveyor/ Coolant Reservoir Tank, S/N87, [20...
Mori Seiki SL303A/700 CNC Lathe, Mori-MSG501 CNC Controls, Mayfran Consep 2000 Chip Conveyor, S/N 871, [2001] NOTE: THIS MACHINE HAS BEEN RELOCATE...
Nordson NVC-4 Paint Booth, 60" x 60" x 60" Interior Cabinet, 3 HP Motor, 230/460V NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLE...
CAE Ransohoff 4066 3-Stage Automatic Conveyor Parts Washer, 80 Pallets Per Hour, 0.5-5 FPM Conveyor Speed, 2060 Chain Conveyor Type, 13" x 10" Par...
Global Finishing Solutions Industrial Spray Booth, 104" x 60" x 120" H [2008] NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CONTROLLED WA...
ABB IRB 3000 Robot
ABB IRB 3000 General Purpose Robot, 66LB - 30K Load Capacity, 78" Reach, 6 Axis, Control NOTE: THIS MACHINE HAS BEEN RELOCATED TO A TEMPERATURE-CO...
Prawema SynchroFine HFSL203W High Performance CNC Gear Honing Machine, 40-160mm Workpiece Diameter Capacity, 55mm Max Teeth Width, 200mm Max Shaft...
Ravensburg 100" x 254" Manual Lathe with Crane Rope Drum Threading, 84" O/C, 63" 4-Jaw Chuck, 240 RPM, Crane Rope Threading, Copy Device, 19.8 Ton...
Makino a71 Horizontal Machining Center, 19.7” x 19.7” Tables, X-Axis Travel: 28.7″, Y-Axis Travel: 28.7″, Z-Axis Travel: 31.5″, 60 ATC, Cat 50 S...
Makino a71 Horizontal Machining Center, 19.7” x 19.7” Tables, X-Axis Travel: 28.7″, Y-Axis Travel: 28.7″, Z-Axis Travel: 31.5″, 60 ATC, Cat 50 ...
Loading...-
48 item(s)/page