{ Group of lots: 710, 711, 712 } } } } MANUAL PIPE THREADER

{ Group of lots: 710, 711, 712 } } } } PRECISION UNIVERSAL TOOL HEAD

KURT VISE

{ Group of lots: 714, 715, 716, 717, 718, 719, 720, 721, 722 } } } } MACHINE VISE

{ Group of lots: 714, 715, 716, 717, 718, 719, 720, 721, 722 } } } } MACHINE VISE

{ Group of lots: 714, 715, 716, 717, 718, 719, 720, 721, 722 } } } } 10'' 4-JAW CHUCK

{ Group of lots: 714, 715, 716, 717, 718, 719, 720, 721, 722 } } } } 10'' 3-JAW CHUCK

{ Group of lots: 714, 715, 716, 717, 718, 719, 720, 721, 722 } } } } 12'' 3-JAW CHUCK

{ Group of lots: 714, 715, 716, 717, 718, 719, 720, 721, 722 } } } } 12'' 3-JAW CHUCK

{ Group of lots: 714, 715, 716, 717, 718, 719, 720, 721, 722 } } } } 14'' SPINDLE CHUCK

{ Group of lots: 714, 715, 716, 717, 718, 719, 720, 721, 722 } } } } 16'' 3-JAW CHUCK

{ Group of lots: 714, 715, 716, 717, 718, 719, 720, 721, 722 } } } } 16'' 4-JAW CHUCK

MOTOR FOOT FLATNESS TABLE

{ Group of lots: 724, 725, 726, 727, 728, 729, 730 } } } } BUCKET OF EYEBOLTS

{ Group of lots: 724, 725, 726, 727, 728, 729, 730 } } } } BUCKET OF EYEBOLTS

{ Group of lots: 724, 725, 726, 727, 728, 729, 730 } } } } BUCKET OF EYEBOLTS

{ Group of lots: 724, 725, 726, 727, 728, 729, 730 } } } } BUCKET OF EYEBOLTS

{ Group of lots: 724, 725, 726, 727, 728, 729, 730 } } } } BUCKET OF EYEBOLTS

{ Group of lots: 724, 725, 726, 727, 728, 729, 730 } } } } BUCKET OF EYEBOLTS

{ Group of lots: 724, 725, 726, 727, 728, 729, 730 } } } } BUCKET OF EYEBOLTS

DO-ALL BANDSAW POWER SAW; MODEL C-80 AUTO CYCLE, ADJUSTABLE BACK GAUGE CLAMP, FEED CLAMP, RAPID TRAVERSE, ADJUSTABLE BAND, 230-VOLT

MOTOR CASE

GIDDINGS & LEWIS HORIZONTAL TABLE TYPE BORING MILL; 48'' X 86'' TABLE T-SLOT, S/N 150-453-61, NEWALL DF700 DRO CONTROL OUTRIGGERS 106'' CROSS TRAV...

{ Group of lots: 734, 735 } } } } NILES 300-TON HORIZONTAL WHEEL PRESS-MACHINE; NO#142 PENNANT, CONTROLS, 122'' CARRIAGE TRAVEL, HYDRAULIC PUMP U...

{ Group of lots: 734, 735 } } } } SHELF WITH BORES & SLEEVES

TRUMP VERTICAL MILL; MODEL BPVK5, S/N 0104098, KURT TOOL POST, 8'' CROSS TRAVEL, 58'' X 11'' T-SLOTTED BED

DO-ALL VERTICAL BAND SAW; MODEL DBW-15, S/N 290-778017, SINGLE PHASE, 240-VOLTAGE, 30-AMPERAGE, 50/60 HERTZ

KINGTON 1992 VERTICAL MILL; MODEL KMT-3V, S/N 7414, AVILL FEED, MITUTOYO KI COUNTER, DRO CONTROL, VARIABLE SPEEDS, TOOL POST, 12'' CROSS TRAVEL, 5...

WEBSTER BENNET HORIZONTAL 3'' ROTARY CHUCK TABLE NEWELL TOPAZ DRO CONTROL, 32'' HORIZONTAL TRAVEL, 5-TURRET VRT TOOL POST

{ Group of lots: 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750 } } } } L-W 4-HEAD CHUCK

{ Group of lots: 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750 } } } } 3-HEAD CHUCK

{ Group of lots: 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750 } } } } LOT OF SPINDLE HEADS

{ Group of lots: 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750 } } } } LATHE TOOLING

{ Group of lots: 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750 } } } } STATIONARY TAILSTOCK

{ Group of lots: 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750 } } } } TOOL POST

{ Group of lots: 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750 } } } } TOOL POST

{ Group of lots: 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750 } } } } LOT OF TOOL POST

{ Group of lots: 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750 } } } } 5' STEEL TABLE

{ Group of lots: 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750 } } } } TOOL POST

{ Group of lots: 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750 } } } } 5' STEEL TABLE WITH VISE

RACK WITH MACHINE TOOLING

SUMMIT 36 X 120 TURN LATHE; 36'' SWING TAIL STOCK, STEADY REST, S/N 790802, 26'' 4-JAW CHUCK, 12'' BED DOUBLE TOOL POST, POWER SLIDE, 4'' BAR THRO...

{ Group of lots: 753, 754, 755, 756 } } } } ROLLING CART WITH BRUSH PLATING SUPPLIER PORTA-PACK PLUS, MODEL UL200-20-220-1

{ Group of lots: 753, 754, 755, 756 } } } } ROLLING CART WITH LATHE TOOLING & STOCK

{ Group of lots: 753, 754, 755, 756 } } } } CHICAGO CORD REEL WITH TRIPLE TAP

{ Group of lots: 753, 754, 755, 756 } } } } EZ COIL REEL WITH DUAL HOSE

{ Group of lots: 757, 758, 759 } } } } DEAN SMITH & GRACE 22HX130 TURN LATHE; M/R 39518-3-74, 161'' BED, STEADY REST, TAIL STOCK, 2-STAGE POWER T...

{ Group of lots: 757, 758, 759 } } } } SHELF WITH CONTENTS; LATHE TOOLING

{ Group of lots: 757, 758, 759 } } } } SHELF WITH CONTENTS; LATHE TOOLING

MAZAK TURN LATHE WITH ANILAM MINI WIZARD MNC DRO CONTROL, TOOL POST, DOUBLE SLIDEWAY, TAILSTOCK, STEADY REST, 15'' 4-JAW CHUCK, 8'' CENTER, 94'' B...

CINCINNATI PEDESTAL DOUBLE END GRINDER; MODEL 110, 2-HP

TURN LATHE WITH TRAK MNC; 24'' 4-JAW CHUCK, POWER APRON/SLIDEWAY, TOOL POST, TAIL STOCK, STEADY REST, 224'' BED LENGTH, 12'' CENTER, 24'' SWING, 3...

DAEWOOD A20 TURN LATHE WITH NEWALL TOPAZ MNC CONTROLS, DOUBLE TOOL POST, APRON SLIDEWAY, TAIL STOCK, 80'' BED LENGTH, 15 3/4'' 4-JAW CHUCK, 10'' C...

HEAVY DUTY MAZAK 24 TURN LATHE WITH NEWALL TOPAZ MNC CONTROLS, POWER APRON, ALORIS TOOL POST, TAIL STOCK, STEADY REST, 24'' 4-JAW CHUCK, 183'' BED...

CABINET WITH MISC. HARDWARE

METAL SHELF WITH MISC. LATHE TOOLING

PRJ GROWLER ON PEDESTAL; S/N 1-26-96

MACHINE TURN TABLE

SULLAIR-ES-II AIR COMPRESSOR; MODEL ES11-5DL/A1SVL, S/N 008-121996, DRO CONTROL, 100/110 PSIG

{ Group of lots: 770, 771, 772, 773, 774, 775, 776, 777, 778, 779, 780, 781, 782, 783, 784, 785, 786, 787, 788, 789, 790, 791, 792, 793, 794, 795...