WHIRLWIND 1000 UPCUT SAW W/O TIGER STOP

WADKIN-BURS-GREEN 4AGS7731 TABLE SAW,5HP,WITH MATERIAL FEEDER FCT13423,THREE HEAD DESIGN, S/N 909723

ROCKWELL 50-C RADIAL ARM SAW WITH 12'' BLADE, S/N SOLO457903-00

DOUCET 03A/6 GLUE WHEEL WITH 20 ROWS OF CLAMPS,20' LGT.X36''WIDTH, S/N 6922-2-1EX

TIMESAVER 337-2 WIDE BELT SANDING MACHINE WITH 36'' BELT

WORK TABLES IN GLUE UP DEPT. (5)

DAYTON PEDESTAL FAN

GIBEN SMART SP75 PANEL SAW, EQUIPPED WITH 3-AXIS CNC, MADE IN BRAZIL,230 VOLT,3 PHASE

JOYCE 020-04037 SCISSOR LIFT TABLE 48''X60'' ,4,000 POUND CAPACITY, S/N D244E4

AMERICAN 1223-4A SCISSOR LIFT TABLE WITH 8,000 LBS. CAPACITY,48'' X 108 TABLE

HARDWOOD STOCK ON CARTS(4)

TRIM, MOULDING, AND MILLWORK AGAINST WALL

DRAWER SIDE STOCK, S/N S-400082131

SCMI TECH99L PANEL MACHINE, EQUIPPED WITH 3-AXIS CNC AND REMOTE PENDANT, MATR.ALI/003122,REF011712

BALESTRINI NOVA3PO1434 TENON MACHINE, DOOR FRAMES UP TO 77 CM., S/N 198

P.BACCI MXD MORTISE MACHINE,5 HEAD,CNDO15 DISPLAY

PROFILE MACHINE WITH UNIVERSAL POWER FEED

DEWALT DW703 COMPOUND MITER SAW WITH 10 INCH BLADE AND 12' WORK TABLE,120 VOLT.

WHIRLWIND 1000 UP CUT SAW WITH TIGER STOP,12'' ENTRY TABLE AND 6' EXIT , S/N 606066069

P.BACCI MXD MORTISE MACHINE, NUMBER 6,THREE HEAD DESIGN, S/N 4100648634

P.BACCI TDS TENON MACHINE, DOOR FRAMES UP TO 77 CM. 2

POWERMATIC 26 SHAPER WITH UNIVER 508 POWER FEED

POWERMATIC 2034 TABLE SAW WITH FCT-8 POWER FEED ,38''X48'' TABLE ,230 V. 3PHS., S/N 114

MARQUIS DOOR PROFILER WITH 3 HEADS AND BALDOR 5 HP MOTOR, 240V , 3 PHS., S/N 116042702

POWERMATIC 66-TA TABLE SAW WITH UNIVER 50-B POWER FEED,28X72'' TABLE,5 HP MOTOR 240 V,3 PHS., S/N 122899131

POWERMATIC 64-A TABLE SAW WITH STEEF 2034 POWER FEED,24X48'' TABLE 1.5 HP SINGLE PHS.

WHIRLWIND 100-R UPCUT SAW 7' LONG ENTRY AND EXIT TABLE W/O TIGER STOP, S/N 6240716

POWERMATIC VERTICAL BANDSAW,12X12'' TABLE,230V 3 PHS.

RITTER R30 LINEAR PROFILER WITH FTC,26083 POWER FEED,230/460 V,3 PHS., S/N KK-93302

UNIQUE 2702 CNC PANEL PROFILER WITH AN INTUITIVE TOUCHSCREEN,81 '' WIDE ENTRY .

UNIQUE 2700 CNC PANEL PROFILER WITH AN INTUITIVE TOUCHSCREEN,81 '' ENTRY (NEEDS REPAIR), S/N 132

VOOR-WOOD A112 PROFILER, SANDER, SHAPER, TWO CUTTING HEADS EACH WITH 5 HP DRIVE MOTORS, TWO SANDING HEADS WITH 1 HP DRIVE MOTORS.220VOLT ,3 PHASE

RODGERS 40A BUMP SANDER WITH A VERTICAL BELT FACE AND 6 '' WORK TABLE,93'' BELT C TO C .

INDIANA NO 12 SANDER WITH A VERTICAL FACE,11'' TABLE, SPARE BOLTS,5 HP MOTOR,230/460 V 3 PHS.

SANDING-MASTER SCSB-2-900 BELT SANDER WITH 36'' WIDE BELT, 21,812 HOURS

EXTREMA FPC525 3 HEAD SANDER DESIGN,MAGNUM SERIES , 36 '' BELT, S/N CS04DT45-1-84

RAMCO 24 WIDE BELT SANDING MACHINE WITH A 10 HP MOTOR AND 24X84'' BELT, S/N D94093-187

VERTICAL DRILL PRESS 13 DRILLING HEADS, DOUBLE ROW CONFIGURATION, TWO 2 HP MOTORS EACH SIDE AND FOOT PEDAL CONTROL, S/N 735015

PISTORIUS TOE KICK SAW WITH TWO 15 ''BLADES AND TWO 1.5 DRIVE MOTORS

PORTER CABLE 75192 FLUSH SIDE ROUTER , 120 VOLT

WOBBLE BLADE RABBETER , 120 VOLT., S/N PLA08JLT

POWERMATIC DT 45 DOVE TAIL MACHINE,1HP MOTOR,110 VOLT

DODDS SE-1 DOVE TAIL MACHINE,1HP MOTOR,110 VOLT

JET CTAS-165-3 TABLE SAW WITH THREE WHEEL FEEDER,7.5 HP MOTOR230/460 VOLT, 3 PHS.

FRAME AIR CLAMP TABLE, 11 X 5 ' WITH 5 CLAMPS AND MATERIAL HOLD DOWN

WORKTABLES (2) NEXT TO FRAMING CLAMP

LANCASTER JLT DOOR CLAMP, 36 X72 '' TABLE

RITTER 1400 DOOR CLAMP, 60 X 60'' WORK AREA

POWERMATIC MARQUIS FRONT PROFILER, BALDOR 5 HP MOTOR, PNEUMATIC TABLE CLAMP, 230/460 VOLT

ROCKWELL FINGER PULL MACHINE, 1 HP MOTOR, 230 VOLT 3 PHS.

DELTA PROVINCIAL PROFILER WITH STEFF 2034 POWER FEED 230 VOLT/3PHS.

PORTER CABLE 75192 ROUTER TABLE WITH DELTA INDUSTRIAL POWER FEED

DOWN DRAFT TABLE, 5 X 10 ' TABLE

DOWN DRAFT TABLE, 5 X 10 ' TABLE

KNIFE HINGER, TABLE TYPE, 8'' DIAMETER BLADE, ENTRY TABLE

SHOP CARTS (4) IN ROW

SHOP CARTS IN ROW (5), S/N E818VO2477F

WORK TABLES (8), S/N E818VO2509F

GLUE WHEEL WITH 5 ROWS WITH CLAMPS, 11'X 36'' CLAMPING AREA, S/N E818V02514F

STORAGE SHELVES, FOUR TIER, S/N E818V024600F