Lot of (1) 8" Machinist Vise

Lot of (1) 6" Machinist Vise

Lot of Vise and Mill Stops

Lot of Mill Scrap Clamps; Stop Blocks; and Remaining Content

Lot of (4) Plastic Totes with Parallels and Blocks

Tote Containing Universal 300 Quick Switch Tooling

Tote Containing Universal 300 Quick Switch Tooling

Tote Containing Universal 300 Quick Switch Tooling

Stryco Model MF2 Band Saw Blade Welder S/N 26068; 230 Volt, 60 Hz, Single Phase, 27 Amp, Steel Stand Mounted; with Estimated 6"D Disc Grinder

Vollmer Model ANE/ANS11A Welder (1992); Steel Stand Mounted

Vollmer Model Lilliput Senior Saw Blade Sharpener

Lot of Parts Cabinets, To Include: Screws; Nuts; Air Fittings; Fluid Connectors; Pipe Threading Attachments; etc.; (Remaining Content On Parts Con...

Lot of (6) Spools of Hose and Pallet Racking

Amrox 55-Ton Shop Press with Enerpac Hydraulic Unit

Lot of (11) Sections of Pallet Racking, Each Section 6-1/2'H, with (4) 9' Crossbeams/Section and (4) Pieces of Wire Decking/Section; with Content ...

Lot of Content In Office, To Include: Allen-Bradley Model 1746-OW16 Output Modules; Allen-Bradley Model 1746A4 B 4-Slot Racks; Allen-Bradley Model...

Lot of (2) Shelves with Content, To Include: Switches; Spring Latches; Filter Screens; Cord Assembly; Gaskets; Washers; Support Pins; Spark Plugs;...

(2) Shelves with Content, To Include: Parker Flow Valves; Blow Valves; Arrow Pneumatics Filters; Lubricators; Gauges; Brackets; Regulators; etc.

(2) Metal Shelves with Content, To Include: Valves; Bosch Valves; Manifolds; Coils; Pin Valves; Solenoid Pilots; Regulators; Blow Valves; Wire Lea...

Lot of (2) Metal Shelves with Content, To Include: Reducers; Manifolds; Sub Plates; Check Valves; Control Valves; Gauges; etc.

Lot of (2) Shelves and Content, To Include: Gas Control Valves; Transformer; Pressure Switches; Gas Pressure Switches; Flow Switches; Timers; Hone...

Lot of Metal Shelving; Metal Cabinets; and Content Along Wall In Store Room, To Include: Cylinder Service Kits; Non Destructive Testing Material; ...

Lot of Shelving with Content Along Wall, To Include: Cylinder Rods; Belts Along Wall Dodge Sheaves Gates Multi-Speed Belts; etc.

Lot of Metal Racking with Content on Wall, To Include: Rivets; Equipment Spare Parts; Allen-Bradley Processor Units; 2-Burner Safe Guard Protectio...

Lot of Metal Racks and Content In Electrical Room, To Include: Allen-Bradley Operating Handles; Overload Relays; Pneumatic Time Delay Attachments;...

Lot of (2) Rows of Metal Shelving and Content, To Include: Light Fixtures; Replacement Lights; Filters; Brushes; Cleaning Supplies; Wall with Spar...

Lot of Metal Shelving; Paint Spray Cans; Enamel Finishing; and Flammable Cabinet Located In Paint Room

Hoffman Model 38403A2 Centrifugal Blower S/N 0475094; Order #GS-26228, Skid Mounted; with Eclipse Category #216LT-AF-3 Shut-Off Valve, S/N 63914, ...

Leg Mounted Steel Hopper S/N 56"D x 48"H; with Clamshell Type Discharge

Leg Mounted Steel Hopper S/N 72"W x 80"H

72"W x 80"H Leg Mounted Steel Hopper

Lot of (1) 12"/24" x 18'4" Vibratory Conveyor; (1) 12"/24" x 20'6"L Vibratory Conveyor; (1) 12"/24" x 21' Vibratory Conveyor; (1) 12"/24" x 14'L V...

Lot of (1) Leg Mounted Steel Hopper, 72"W x 72"L x 86"H; with Estimated 10"W x 25'H Bucket Elevator; (Buyer Must Cover Hole with Steel Plate)

Redford-Carver Model CB26UL Horizontal Cold Box Core Machine S/N 107CB26UL-1180; with 125 Lb. Blow Heads; and Enclosure; Pick Off; Estimated 15 hp...

(2) Skids with Redford-Carver Model CB26UL Spare Parts

Interel Environmental Technologies Model MS-2500 Gas Scrubber S/N 789; with Advanced Chemical Systems Model 460 pH/ORP Controller

Lot of (6) Core Tip Up Racks, Each with (7) Tip Up Platforms, Platforms Are Approximately 35"D x 53"L, Or 26"D x 53"L

Lot of (7) Core Tip Up Racks, Each with (7) Tip Up Platforms, Platforms Are Approximately 35"D x 53"L, Or 26"D x 53"L

Lot of (7) Core Tip Up Racks, Each with (7) Tip Up Platforms, Platforms Are Approximately 35"D x 53"L, Or 26"D x 53"L

Lot of (4) Core Tip Up Racks, Each with (7) Tip Up Platforms, Platforms Are Approximately 35"D x 53"L, Or 26"D x 53"L

Lot of (6) Core Tip Up Racks, Each with (7) Tip Up Platforms, Platforms Are Approximately 35"D x 53"L, Or 26"D x 53"L

Lot of (4) Core Tip Up Racks, Each Rack with (5) Tip Up Shelves, Each Shelf Is 30"D x 68"W

Lot of (3) Core Tip Up Racks, Each Rack with (5) Tip Up Shelves, Each Shelf Is 30"D x 68"W

Lot of (3) Core Tip Up Racks, Each Rack with (5) Tip Up Shelves, Each Shelf Is 30"D x 68"W

Lot of (2) Sections of Pallet Racking ...[more]

Titan Estimated 125'L Power Belt Conveyor Suspended, Column Mounted; with Drives

Lot of (4) Instructions Stands

Redford-Carver Model CJV3000-1 6-Ton/Hour Gas Generator S/N 119-CJV3000-1 (1991)

Gems Model LS800-3-SS-SS-5PST Gas Sensor S/N 65685; Part #143076; (New In Box)

Mold Rotary Drying Oven with (2) 36"D Rotary Stands

Estimated 38"D x 30"H Sand Hopper Steel Structure Mounted

Estimated 38"D x 30"H Sand Hopper Steel Structure Mounted

Estimated 32"D x 30"H Sand Hopper Steel Leg Mounted

Conveyor Gearbox

Conveyor Gearbox

Rapid Conveyor Gearbox

Conveyor Gearbox

Torit Model TJ 1080-155 Dust Collector S/N BB 3410; with Blower; and Timer

Donaldson Model TD6120 Dust Collector S/N 243435; with Allen-Bradley Programmable Logic Control;

Eirich Model DEV22 Sand Muller S/N 19742; with Bauer 25 hp Vertical Drives; Wolfer 55 hp Motor, (2003); Dust Hood; Steel Feed Hopper; Bucket Eleva...