Refine your search
Primary Category
Category
Brand
Item Type
- Pocket Surf (4)
- Bin (3)
- Material Handling Attachment (3)
- Cooler (2)
- Pallet (2)
- Actuator (1)
- Bandsaw (1)
- Basket (1)
- Cabinet (1)
- Check Valve (1)
- Clamp (1)
- Crate (1)
- Hose (1)
- Inverter Drive (1)
- Ladder (1)
- Lift (1)
- Motor (1)
- Pallet Jack (1)
- Robot (1)
- Rolling Ladder (1)
- Saw (1)
- Saw Blade (1)
- Screw (1)
- Shelves (1)
- Shipping Crates (1)
- Stepper Motor (1)
- Tank (1)
- Teach Pendant (1)
- Temperature Probe (1)
- Tool Cabinet (1)
- Tote (1)
- Transducer (1)
- V Block (1)
- Valve (1)
- Wire (1)
- tool (1)
State/Province
Town/City
- List
- Grid
-
447 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Located in Redford, MI
Located in Redford, MI
Located in Redford, MI
Located in Redford, MI
2013 OKUMA GENOS L400 CNC LATHE
CNC control: OSP-P200L-R, # axis: 2, Swing: 20.47", Turning diameter: 15.35", Center distance: 19.68", Chuck size: 10", Bar capacity: 3.14", X axi...
1998 LEADWELL T5 CNC LATHE
6" 3 Jaw Chuck, Max Swing: 12.99", Max Turning Dia: 5.35", Swing Over Cross Slide: 5.35", Max Turning Length: 5.9", Bar Capacity: 1.37", Ravel: X-...
Max Turning Diameter: 26.37", Max Turning Length: 70.86", Max Bar Capacity: 5.1", Swing Over Bed: 35.8", Swing Over Carriage: 33.3", Distance Betw...
Okuma Howa ACT-35 CNC LATHE
Max Turning Diameter: 13.77", Max Turning Length: 24.02", Distance Between Centers: 24.29", Max Bar Capacity: 3.07", Swing Over Bed: 19.68", Swing...
OKUAM HOWA ACT 4 CNC LATHE
Horsepower: 30, Swing Over Bed: 21.25", Distance Between Center: 29.52", Max Turning Diameter: 15.35", Max Turning Length: 28.74", Spindle Nose: A...
MORI SEIKI AL-20 BTM CNC LATHE
Chuck Size 8", Max. Diameter Bar Capacity 1.8", Max. Swing Over Bed / Carriage 18.9" / 12.2", Max. Turning Diameter 9.8", Max. Machining Length 19...
Rowe VET 14-40 Coil Straightener
40" capacity x .0747 Mild Steel. Located in Detroit, MI
LEBLOND REGAL 24" X 72" LATHE
Swing Over Bed & Carriage Ways 26", Swing Over Cross Slide 18 1/4", Distance Between Centers 72", Size of Hole Thru Spindle 2 1/8", Size of Tool H...
ENTERPRISE 1550 LATHE
Swing 15", Center Distance 60", Spindle Speeds 44 - 2000 RPM, Bar capacity 1.5". Equipped with: Inch / Metric Threading, Steady Rest, Coolant Pant...
Table Size: 22" x 44", Table Longitudinal Travel: 44", Saddle Cross Travel: 22", Table Surface to Wheel Collet: 1" - 27", Spindle Center to Column...
Dimensions: 52.50 (H) x 60.00 (W) x 84.00 (L) inches, Capacity: 0.25" - 4.75", Bar Length: 14"- 63", Loading Capacity: 26", X OR Z-Axis Retraction...
COMET VERTICAL MILLING MACHINE
Table Size: 9 X 42, Longitudinal Table Travel: 36", Cross Table Travel: 15", Vertical Travel Of Knee: 16", Ram Travel: 24", Quill Travel: 5", Quil...
VIN 1FVACWDT8DDBW9188, Cummins Engine, Automatic Transmission, 26' Box, Forklift Stable Deck, Good Tires and Brakes, Runs Good. Located in Toledo...
NEW 2019 Freightliner CL120
VIN:3ALXA7007KDKD9947.Starts/Runs/Drives. Detroit 12.7L Engine, ZF Autoshift Transmission, Very Low Miles, Never Used.(Lot #19) Item Location - C...
Dump Trailer with Liner
Dump With Liner, Works Well. Item Location - City: McCook Item Location - State/Province: Illinois Item Location - Country: United States
Type 03939036 Swiss Made, 35"x37". Machine height 65", Cabinet height 30", 300kg. Loading not provided. Located in Romulus, MI.
18" x 96" Elb Surface Grinder
S/N: 430090398, Unicon Control Panel. Located in Dayton, OH
Chip Conveyor; Serial No. TPTCGDCNC1374332; Model Dated 2/17/93; W/ Tooling, Drilling Diameter: 1/8" To 2", Table L X W: 96" X 62", Table Weight C...
Serial # 592, Model Pcv-40 LI, 78"L x 88" W x 107" H : 10,200 LBS, Travels: X: 22", Y: 16", Z: 16", Table Size 28" X 16", Max Spindle Speed 10,000...
Model: B-130S, Serial#54312, 180" x 252" x 150" : 52,000 lbs. Spindle Size: 5", Spindle Taper: 50, Spindle Speeds: 14-1000 Rpm, Table Size: 60" X ...
Clark CMC 20S Forklift
Propane Fuel type, Lifting Capacity 4,000 lbs. 24" Load Center, with speed up to 11.2 mph. Video upon request. Located in Troy, MI.
Max 385 Rpm.This machine is suitable for cutting spur and helical gears, pinions, splines, sprockets, worm gears and other workpieces of similar p...
Serial Number: 9311232, Date of Mfg.: 1993, Table Size 62.5" x 30", Floor to Table Surface 36", T-Slots (No. x Width x Span) 5 x .687" x 5.5", Cut...
Serial Number: S86A07-1-1, Date of Mfg.: 05/2008. Robot Specifications: Axes: 6, Payload: 6.00kg, H-Reach: 1378.00mm, Repeatability: ±0.0800mm, Ro...
Serial Number: S86A07-1-4, Date of Mfg.: 06/2008. Robot Specifications: Axes: 6, Payload: 6.00kg, H-Reach: 1378.00mm, Repeatability: ±0.0800mm, Ro...
Serial Number: S86A07-1-2, Date of Mfg.: 06/2008. Robot Specifications: Axes: 6, Payload: 6.00kg, H-Reach: 1378.00mm, Repeatability: ±0.0800mm, Ro...
Serial Number: S86A09-1-3, Date of Mfg.: 04/2008. Robot Specifications: Axes: 6, Payload: 6.00kg, H-Reach: 1378.00mm, Repeatability: ±0.0800mm, Ro...
Date of Mfg.: 2014, 19.6" x 39.3" Table, X-Axis: 33.465", Y-Axis: 19.685", Z Axis: 24.606", RPM: 6,000, 16 Slot ATC, Power 35 hp, Table-W: 19.685"...
Date of Mfg.: 2014, 1000MM x 1200MM Table, X Axis: 1000MM, Y Axis: 610MM, Z Axis: 650MM. Specifications: X: 39.37", Y: 24.016", Z: 25.591", Power ...
Serial Number: TR2-30-26965, Date of Mfg.: 1987, 30 Ton Capacity, Bed Area of 30" x 21", Length of Stroke 2", Speed Variable 0-900 SPM, Adjustment...
Located in Imlay City, MI. Loading fee $200
Serial Number HB35-054-572, Date of Mfg. 06/2012. Specifications: Payload 881.8 Lb., Reach 101.3", Repeatability 0.0118", Number of Axes 6, Mass 5...
Used Like New. Serial Number Hb35-054-572, Date of Mfg. 06/2012. Specifications: Payload 881.8 Lb., Reach 101.3", Repeatability 0.0118", Number of...
Straightener S/N: S5-76745, Decoiler S/N: PR-76746, Approximate Date of Mfg.: 1976, Specifications: Max Weight Capacity. Located in Imlay City, MI...
.Serial Number: H4101, Date of Mfg.: 1995, Made in Finland, with a max load capacity of 11,240 lbs., and a max table rotating speed of 15 degrees ...
20' Mobile Machining Shop
20' Standard Height Shipping Container outfitted to be a mobile machining shop! This unit includes an Acer mill, two banks of ceiling mounted ligh...
2014 FADAL FG-5 CNC Lathe
Universal Robots UR5 with ROBOTIQ Force / Torque Sensor, Camera Module, and 2F Adaptive Gripper. Date of Mfg: 2018, Hours: 3 This ultra low hour (...
Serial Number: 150300241, Date of Mfg.: 2015, Cleaned and turned on in shop, in great condition. Located in Imlay City, MI. Loading fee $200
Serial Number: 150200660, Date of Mfg.: 2015, Cleaned and turned on in shop, in great condition. Located in Imlay City, MI. Loading fee $200
Serial Number: 221752. Cleaned and turned on in shop, in great condition. Located in Imlay City, MI. Loading fee $200
Serial Number: HOLO10190. Specifications: Power 15 hp. Great condition. Located in Imlay City, MI. Loading fee $200
Loading...-
447 item(s)/page