Refine your search
Category
- Machines (59)
- Other Industrial Supplies & Equipment (20)
- Presses (13)
- Surface Treatment Machinery (13)
- Generators (11)
- Machine Tools & Tools (10)
- Measuring & Testing Equipment (5)
- Saws (5)
- Forklifts (4)
- Handling & Packaging (4)
- Warehouse Equipment (4)
- Networking & Communications (3)
- Analytical Instruments (2)
- EDM Electrical Discharge Machining (2)
- Heavy Duty Trucks (2)
- Surface Treatment (2)
- Automobiles (1)
- Compressors (1)
- Laboratory & pharmaceutical equipment (1)
- Metalworking (1)
- Pipes & Fittings (1)
- Vans (1)
Filtered by:
- Lots with images only
- List
- Grid
-
165 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Lot of Laser Gas Tubes
Qty 3 used 10 x 4 x 2, Qty 2 used 10 x 6 x 3, Qty 2 used 16 x 8 x 4, Qty 1 used B8-930-360 9 x 12 x 6, Qty 1 used clean glass B8-930-360 9 x 12 x ...
Qty 1 Telemecanique PLC - 15in / 23out/ TSX DMF 401, Qty 1 Telemecanique PLC - 21in / 11 out / TSX-17, Qty 2 used OPL HVG 152, Location: Warren, M...
Qty 3 V&S Model BE25/150, Qty 2 V&S Model IP/133, Qty 2 V&S Model BE25/150, Location: Warren, MI ...[more]
Qty 2 New Rofin Mirror #820-3029-2 / #825-3020-2, Qty 2 Grundfos Seal CRK 2/4 AUUV A #00415080, Qty 1 Koolant Kooler Thermo Probe #OVE-02-CP85, Lo...
Vacuubrand Vacuum Guage Kit used german #682930 / MBAR 1300-1 / Model DVR1, Misc PRC Eproms, UV Laser Eprom Eraser model QTV-T8 #ERA-T8N-000 used,...
PRC Frequency Drive / turbo flow GP547P5 GPD505V-B021, Siemens Y Axis Drive Lt-Modul Int 8A #1P 6SN1123-1AA00-0HA0 used, ANCA Servo Drive #90-1702...
Lot of Misc Used Boards
Miscellaneous circuit boards, switchboard, capacitance signal board, relay board, Etc. not tested, Location: Warren, MI ...[more]
Lot of Misc Equipment
Soldering stuff, electrical equipment, O-rings, Gas fittings, electric caps, regulators, Etc - Location: Warren, MI ...[more]
Haas CNC Machine
Model O, Year 1997, Serial Number 12460, V 208/230, 3 Phase , Location: North Charleston, SC
Serial number: 9699 Year new: 1993 approx, Specifications: Longitudinal Travel (X) – 30”, Cross Travel (Y) – 16.14”, Vertical Travel (Z)...
MODEL: MYNX 500, SERIAL #: AVSE0644, YEAR: 2000, 47" x 20" TABLE, X AXIS 40", Y AXIS 20", Z AXIS 22", 8000 RPM, 8"-30" SPINDLE NOSE TO TABLE, TAPE...
DAWEOO DMV 500 VMC
Serial#: AV5S0699, Age: 2000, Travel: X-Axis 40.2", Y-Axis 19.7", Z-Axis 20.1", Table Size 47.2" x 19.7", Spindle Speed 80 - 10,000 RPM, Spindle T...
24 BRAND NEW Globars, 12 on top, 12 on bottom $7000 Cost, Each Globar is a Silicon Carbide SiC Heating Element: 81” long by 1.5” diameter with a 5...
MDL. JVRE3016-1, S/N: 6763515, 15-20" ID, 48" OD, 3 LEAF, 3 KEEPERS, ELECTRIC DRAG BRAKE, weight is 2K lbs. demensions are 5’ x 5’ x 4’ tall, Aliq...
45 TON VERSON OBI
Model: 6SG, 4" Stroke, 12" SH, 3" Adj, 33" x 26" Bed, 18" x 14" Ram, 50 SPM (Est), Opening in Back-15 1/2", Air Clutch & Brake, ISB Press Control...
S/N: SS-74148, Model: 38-24-7, Coil Straightening Machine, 7-Roll Design, Capacity: 24" Wide x .170 Thickness, Roll Diameter: 4", Speed: 125 FPM, ...
Age: 1990, Material Width: 36", Capacity: .170 @ full width, 6” Diameter Feed Rolls, Anti-Back Up Roll Assembly, Cascade Loop Rolls, Pass Line h...
10 TON KONE BRIDGE CRANE
Span: 60', Kone Hoist, S/N: R12499, Age: 2001(Hoist), Hoist Type XL404H30BFA400B000, Trolly Type: FA, Main Voltage: 460, Control Voltage: 115, Lif...
S/N: 10FM-273-2, MODEL: FMD-10HA, 10 CU FT CAPACITY, 14" CHANNEL, 5 HP MOTOR, 1200 RPM, 230 VOLT 3 PHASE, MANUAL GREASE, WEIGHT APPROX 1200 LBS,...
220 TON NIAGARA SSDC PRESS
Model: 610E, Age: 1953, Stk: 5”, SH: 18” over bolster, Adj : 5”, Bed and ram 42 F-B x 72 L-R, Speed 32 spm, Air clutch and brake, Counter balanc...
Drills To Center Of Circle: 240”, Column Diameter: 26”, Arm Length: 120”, Spindle Speeds: 6 To 650 RPM, Feeds: To .125 IPR, Spindle Taper: #6 MT, ...
TARUS HS-8412/48 HIGH SPEED DUAL COLUMN CNC MILL WITH 3 + 2 HEAD, CNC CONTROL: OMTRONIX RETROFIT, NEW-1994, TABLE SIZE.: 72" X 120", TABLE CAPACIT...
NEW 2000, Manufacturer: Makino, Model: A-88, Specifications: CONTROL: FANUC 16M PRO 3 CNC Control, PALLETS: 24.5" X 24.5", X TRAVEL: 35.4", Y TRAV...
Toyota Electric Pallet Jack
Model 7HBW30, SN: 7HBW30-69049, 6000 LB Capacity, Location: Livonia, MI ...[more]
Gemata Roll Coater Tag
Rotolab, Model 60, SN: 911453, 230/60, Location: Livonia, MI ...[more]
De Mattia Flexo Flex Tester
SN: FLE 2006026, Location: Livonia, MI ...[more]
5,000LB Clark Forklift Model CC625MB 2-stage fork lift, propane fuel, hard tires, Side Shift, Location: Detroit, MI ...[more]
SERIAL #: 759474, SPECIFICATIONS: ARM LENGTH: 80" (2000MM), COLUMN DIAMETER: 20" (500MM), SPINDLE SPPEDS: 20 - 2180 RPM, SPINDLE TAPER: NO.5 MT, S...
SERIAL # AKMCP4414CL112464, COLOR: WHITE WITH GRAY INTERIOR, ENGINE: 1.2 LITER GASOLINE (3-CYLINDER), TRANSMISSION: 5 SPEED MANUAL, MILAGE: 17,053...
MINSTER 70 TON OBI PRESS
MODEL: T-9600, CAPACITY: 70 TONS, STROKE: 6", ADJUSTMENT: 4", MAIN MOTOR: 15 HP. 1750 RRPM., 220/440V., 3/60, EQUIPPED WITH: AIR CLUTCH & BRAKE, A...
SERIAL #: 032003115763 NEW: 2003, SPECIFICATIONS: Table Size 39" x 16", Floor to Table 31" , T-Slots (No. x Width x Span) 3 x .562" x 4.33", Cutti...
SERIAL #: 8028, SPECIFICATIONS:, CHUCK SIZE: 16" WIDE X 32" LENGTH, SPINDLE TRAVEL: 16", SPINDLE HORSEPOWER: 3.7 kw ( 5hp. ), GRINDING WHEEL CAPAC...
SWING OVER BED: 24", SWING OVER SLIDE: 19.5", DISTANCE BETWEEN CENTERS: 84", SPEEDS: 7 - 1740 RPM, SPINDLE NOSE: L-2 LONG KEY TAPER, HOLE THRU SPI...
TABLE WORKING AREA: 9" X 42", TABLE TRAVEL: 32", SPINDLE SPEEDS: 60 - 4200 RPM, SPINDLE MOTOR: 3 HP., SPINDLE QUILL TRAVEL: 5", SPINDLE TAPER: R-8...
SERIAL #: 023980505 Specs: CAPACITY IN TONS : 70 TON, THROAT DEPTH: 9", OPEN HEIGHT: 14", STROKE LENGTH : 7", RAM SHAFT DIAMETER: 3", STROKES PER ...
SPECIFICATIONS: CAPACITY: 20", BLADE WIDTH/DIAMETER: 1", TABLE SIZE: 20" X 24", EQUIPPED WITH: BLADE GUIDES, ADJUSTABLE FENCE , SLOTTED TABLE, TIL...
SERIAL #: 041673 NEW: 2004, SPECIFICATIONS: Model: AC-4KV, Table size: 10 x 54 inch, Longitudinal traverse hand only: 36 inch, Longitudinal traver...
MAX CAPACITY: 20", BLADE WIDTH: 1/2", TABLE SIZE: 24" X 24", EQUIPPED WITH: WELDER, CHOPPER, BLADE GUIDES, WORK LIGHT, DISCONNECT, CONDITION: GOOD...
S/N: 35028H5U-0003 Year: 1968 Specifications: Grinding capacity: 0 to 4 1/2", Grinding Wheel Dia.: 20", Grinding Wheel Width: 8", Grinding wheeel ...
Model: U4 S/N: L2284 Year: 1972 Specifications: Distance between centers: 36", Swing: 12", Grinding wheel: 14" x 1" x 5" hole, Work Head Swivels: ...
Swing Over Bed: 27", Swing Over Cross Slide: 14.5", Swing In Gap: 35", Length of gap section on bed: 16.5", Distance Between Centers: 120", Spindl...
Model 15, 12 in. 4-Jaw Chuck, 2-1/4 in. Hole-Through-Spindle, Tool Holder, Tailstock, Location: Detroit, MI ...[more]
150-TON, 60" X 30" BED, 12" STROKE, 40 SPM, 32.5" SH, T-SLOTTED BOLSTER, LIGHT CURTAINS, (1980), W/PRESS CAM 8 CONTROL RELIABLE, PUNCH PRESS AUTOM...
AXELSON 32" X 432" LATHE
s/n: 1715, 32" swing, 34.5" max swing, 42' bed, 432" centers, 25 hp motor, 28" chuck, 4 steady rests, Tailstock, Location: Detroit, MI ...[more]
ROMI G240 CNC LATHE 2005
Maximum turning length (Z-axis): 400 mm, Maximum travel length in the X-axis:180 mm, Maximum feed rate in X-axis: 18 m/min, Maximum feed rate in Z...
(2) 20" x 36" Electro Magnetic Chucks, Coolant System, Motors, Controls, Location: Detroit, MI
Mattison Surface Grinder
Table & Electromagnetic Chuck 15" x 48", Walker Smart 5D Chuck Control, 15 HP Spindle Motor, Cross Feed, Wheel Dresser, Location: Detroit, MI
(FANUC 16T) CNC Control. Max Diameter Bar Capacity-2" / 1.63", Max Swing Over Bed-11" / 11.8", Max Turning Diameter-9.4", Max Machining Length-9.0...
4 x 8 granite table
With heavy duty rolling cart. No chips or gouging on the surface. Location: Detroit, MI ...[more]
Tos Mill 17 x 79
17 x 79" table size, in excellent working order, Location: Detroit, MI
17" X 76" table size, Location: Detroit, MI
Kearney & Trecker 5CK Mill
18" X 98" Table Size, Location: Detroit, MI
18" X 82" table size, Location: Detroit, MI
YEAR NEW 1986, SPINDLE DIAMETER: 3.94", X-HORIZ. TRAVEL OF TABLE: 63 " , Y-VERT TRAVEL OF HEAD: 44 " , Z-SADDLE TRAVEL : 60", W-SPINDLE TRAVEL : 3...
AMADA HA250W HORIZ. BAND SAW
Cutting Capacity: Round (Diameter) 0.5"-10" / Rectangle (W x H) 12" x 10", Work Load Capacity: 3,307 lbs., Material Index Stroke: 15.75", Index Le...
SERIAL #: 3167, SPECIFICATIONS: CAPACITY: 5.5 TONS ( @ 100 PSI), BED SIZE: 21" L-R X 11" F-B, STROKE: 6", STROKE ADJUSTMENT: 2", DAYLIGHT: 14.43",...
TYPE: TUMBLING BARRELL, EQUIPPED WITH: MOTOR & CONTROLS, VARIABLE HOUR CONTROL, CONDITION: GOOD, Location: Romulus, MI
TYPE: TUMBLING BARRELL, EQUIPPED WITH: MOTOR & CONTROLS, VARIABLE HOUR CONTROL, CONDITION: GOOD, Location: Romulus, MI
New 2000's, Fagor 2 Axis DRO, 10" x 50" table, 3HP variable speed head,60-4200 rpm, 5" quill travel, Servo power feed X Axis, Manual crank handles...
CAPACITY: 20", THROAT: 10", SPINDLE TRAVEL: 8", SPINDLE TAPER: NO.3 MT., EQUIPPED WITH: MANUAL FEED, ROUND COLUMN, FABRICATED BASE WITH TABLE, MOT...
Loading...-
165 item(s)/page