Lot - (6) Cat 40 End Mill Holders, (2) Cat 40 Face Mill Holders and (1) Cat 40 Collet Chuck in (1) Box

Lot - (3) Cat 40 End Mill Holders, (1) Cat 40 Collet Chuck with Drill and (1) Cat 40 Quick Change Tap Holder in (1) Box

Lot - (3) Cat 40 End Mill Holders, (2) Cat 40 Face Mill Holders and (2) Cat 40 Collet Chucks in (1) Box

Lot - (2) Cat 40 End Mill Holders, (2) Cat 40 Boring Tools, (1) Cat 40 Face Mill Holder and (1) Cat 40 Quick Change Tap Holder in (1) Box

Lot - (7) Cat 40 End Mill Holders and (2) Cat 40 Face Mill Holders in (1) Box

Lot - (2) Cat 40 End Mill Holders, (1) NMTB 40 3/4 in. Capacity Boring Head, (1) 1/2 in. Capacity Boring Head and (4) End Mill Holders in (1) Box

Lot - 10-Tool 40 Taper Tool Holder Stand, Belt and Communication Cable in (1) Box

Lot - (9) NMTB 40 End Mill Holders in (1) Box

Lot - (4) NMTB 40 End Mill Holders, (3) NMTB 40 Face Mill Holders and (1) NMTB 40 Milling Arbor in (1) Box

Criterion DBL-204 1 in. Capacity NMTB 40 Boring Head with NMTB 40 Boring Tool Holder in (1) Box

Lot - (2) Jacobs 18N 3/4 in. Capacity NMTB 40 Drill Chucks and (1) Jacobs 14N 1/2 in. Capacity NMTB 40 Drill Chuck in (1) Box

Lot - (5) NMTB 40 End Mill Holders, (2) NMTB 40 Face Mill Holders and (1) NMTB 40 Milling Arbor in (1) Box

Lot - (1) Criterion DBL-204 1 in. Capacity NMTB 40 Boring Head, (1) NMTB 40 Collet Chuck and (2) NMTB 40 End Mill Holders in (1) Box

Lot - Machinist Screw Type C-Clamps in (1) Box

1987 Toyoda Model FH80 CNC Horizontal Machining Center, S/n 7197856; Fanuc 11M CNC Controls, 30-HP, 4,500-RPM Spindle Speed, 31.5 in. x 31.5 in. M...

1998 Femco Model WBMC-110R2 4.3 in. CNC Horizontal Table Type Boring Mill, S/n E785463; Fanuc 18-M Controls, 4.3 in. Spindle Diameter, 35-HP, 2,50...

Lucas Model 42B-120 3-Axis Table Type Horizontal Boring Mill, S/n 42B3-416; Sony 3-Axis Digital Readout, Pendant Control, 4 in. Bar, 20-HP, 9-1200...

Cincinnati Gilbert 5 in. 3-Axis Floor Type Horizontal Boring Mill, S/n 252; Anilam Wizard Digital Readouts, Pendant Control, 5 in. Spindle Diamete...

90-Degree Right Angle Boring Head Table Attachment for Cincinnati Gilbert Boring Mill ...[more]

Lucas Model 30DCP96 5 in. 3-Axis Table Type CNC Horizontal Boring Mill, S/n 30DC0301; Fagor CNC Controls, 30-HP, 1,200-RPM, 5 in. Spindle, 50-Tape...

Cincinnati Gilbert 5 in. 3-Axis Table Type CNC Horizontal Boring Mill, S/n 369; Numatix CNC Controls, 5 in. Spindle, 30-HP, 1,500-RPM Spindle Spee...

2007 Koike Aronson Mastergraph-II Model MGM2-2500 8 ft. x 25 ft. CNC Plasma Cutter, S/n 43472; Koike Kar CNC Controls, Kaliburn Proline 2260 Plasm...

Hydraulic Tube Bender (Located in Building 4)

2001 Speedaire Model 1WD38 25-HP Horizontal Tank Mounted Air Compressor; 120-Gallon, 90.1 CFM at 175-Psi, 460-Volt, 3-Phase (Located in Building 4...

Trennjaeger Model PST-2 10 in. Cold Cut Saw with Cabinet Base, S/n 2374; 3 in. Diameter Cutting Capacity, Chip Catch Pan, Start/Stop Buttons, 3-Ph...

Niagara 4 ft. Bending Roll (Located in Building 4) ...[more]

Ridgid Model 535 Portable Pipe Threader, S/n 375308; 8-Amp, 115-Volt, 1-Phase (Located in Building 4) ...[more]

Ridgid No. 801 Model A Portable Pipe Threader, S/n 8102899; 1/2-HP, 7.6-Amp, 6,500-RPM, 115-Volt, 1-Phase (Located in Building 4) ...[more]

Approx. 7,000-Psi Hydraulic Down-Acting Press with Turner Hydraulic Tank; 40 in. x 40 in. Work Surface, Pressure Gauge, Push Button Controls (Loca...

Piranha Model P50 50-Ton Capacity Hydraulic Iron Worker, S/n 6274; 8 in. Throat Depth, 13-1/2 in. Open Height, 9-1/4 in. Closed Height w/o Die Blo...

Rollover Welding/Fabricating Positioner with Fixture; Push Button Pendant Control (Located in Building 4) ...[more]

Lot - H-Frame Press Frame and 104-Slot Organizer Cabinet with Nuts and Bolts (No Hydraulics) (Located in Building 4)

Niles Machine No. 22638 48 in. Gear-Driven Welding/Fabricating Positioner with 12 in. 4-Jaw Chuck (Located in Building 4) ...[more]

10 ft. Long x 10 ft. Wide x 7 ft. High Dry Filter Paint Spray Booth; Overhead Lights, Fire Suppression System (Located in Building 4)

6 ft. Long x 12 ft. Wide x 7 ft. High Dry Filter Paint Spray Booth; (2) Overhead Lights, Fire Suppression System (Located in Building 4)

8 in. Machine Vise

2001 Speedaire Model 1WD38 25-HP Horizontal Tank Mounted Air Compressor, S/n R70A17764; 120-Gallon, 90.1 CFM at 175-Psi, 230-Volt, 3-Phase, with A...

2022 Gardner Denver Electra Saver II Model ST75-100G2B 75-HP Rotary Screw Packaged Air Compressor, S/n S661384; 125-Psi, Model XGNC400A400-FP 300-...

Benchtop Arbor Press

Dake No. 1-1/2 B Benchtop Arbor Press

Benchtop Arbor Press

Dake No. 1-1/2 Benchtop Arbor Press with Steel Stand

Dake No. 1-1/2 Benchtop Arbor Press with Steel Stand

11-Drawer Tooling Cabinet ...[more]

Craftsman 26 in. 6-Drawer Rolling Toolbox

Lot - (7) Cat 50 End Mill Holders in (1) Box

Lot - (7) Various Cat 50 Tool Holders in (1) Box

Lot - (6) Cat 50 End Mill Holders and (2) Cat 50 Face Mill Holders in (1) Box

Lot - (6) Cat 50 End Mill Holders in (1) Box

Lot - (7) Cat 50 End Mill Holders in (1) Box

Lot - (5) Cat 50 End Mill Holders and (1) Cat 50 Face Mill Holder in (1) Box

Lot - (7) Cat 50 End Mill Holders and (1) Cat 50 Drill Holder in (1) Box

Lot - (6) Cat 50 End Mill Holders in (1) Box

Lot - (8) Cat 50 High Speed Chucks in (1) Box

Lot - (7) Cat 50 High Speed Chucks in (1) Box

Lot - (7) Cat 50 High Speed Chucks in (1) Box

Lot - (6) Cat 50 High Speed Chucks in (1) Box

Lot - (6) Cat 50 End Mill Holders and (1) Cat 50 Boring Bar Holder with Cutters in (1) Box

Lot - (7) Cat 50 End Mill Holders with Cutters in (1) Box

Lot - (7) Cat 50 End Mill Holders with Drills in (1) Box