135
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
135
Canadian Industrial Services
Don Finkle
Office – 905-372-8333
Cell – 905-376-0233
Email – don@teamcis.ca
National Rigging & Transportation Ltd.
Shane Sewell
Office – 1-866-909-3010
Cell – 905-401-2762
Email – shane@nationalrigging.com
REDMOND & ASSOCIATES
Tony Redmond
3965 Nashua Drive | Mississauga, ON | L4V 1P3
Phone: 905.671.8800 | Facsimile: 905.671.8801
The Yarmouth Group Inc.
9462 Tower Rd, St Thomas, ON N5P 3S7
519-631-2663
2 Day Auction! - Sept 22 & 23rd
Date & Time: Lots starts closing on Tuesday, September 22, 2020 at 11:00 am ET
Location: 400 S Edgeware Rd, St Thomas, ON N5P 3Z5
Inspection Date: Monday September 21st, 9AM - 4PM or By Appointment
Industry: Plastics
18% Buyers Premium applies on all online purchases.
A $2000 refundable security deposit is required upon online registration. See Terms & Conditions Below.
IMPORTANT REMOVAL INFORMATION - COVID-19
Curbside Pickup Available for hand carry & smaller lots. All other lot removals to be coordinated with Site Supervisor or An Approved Machinery Mover.
We will do our upmost to ensure all Customers are as safe as possible during the inspection & removal processes. We encourage you to practice social distancing while on site. Hand sanitizer and gloves will be made available to anyone who enters the auction site.
If you are experiencing any symptoms of illness or have travelled out of county in the last few weeks, please DO NOT attend the auction site.
We will continue to closely monitor this situation as it evolves and apply appropriate responses and actions.
FEATURING:
TOSHIBA HORIZONTAL INJECTION MOLDING MACHINES
2017 TOSHIBA EC1950SXV50-155A Horizontal Injection Molding Machine, 1980 Ton Cap., Shot Size: 273 Oz, Platen: 102.4” x 92.5”, Tie Bar: 72.8” x 65.4”, Clamp Stroke: 66.9”, Daylight Max: 126”, Ejector Stroke: 11.8”, Injectvisor V50 Control, Dual Core Pull Built In Power Pack, Pneumatic Mold Valve Gate 16 Zone, Hydraulic Mold Valve Gate 16 Zone, Hot Runner Mold Master 48 Zone, Screw Anti Wear DBG & Tungsten Carbide Barrel, SPI Robot, Approx. 8,600 Hours, s/n 702112 Purchased New $1,450,000
2015 TOSHIBA ISG1450DWV50-150A Horizontal Injection Molding Machine, 1430 Ton Cap., Shot Size: 277 Oz, Platen: 78.3” x 78.3”, Tie Bar: 55.1” x 55.1”, Daylight Max: 98.4”, Ejector Stroke: 9.8”, Injectvisor V50 Control, Approx. 19,000 Hours, s/n 520903
2018 TOSHIBA ALL ELECTRIC EC500SXIIV50-26A Horizontal Injection Molding Machine, 500 Ton Cap., Shot Size: 43.5 Oz, Platen: 48.4” x 45.7”, Tie Bar: 34.3” x 31.9”, Clamp Stroke: 31.5”, Ejector Stroke: 6.3”, Daylight Max: 63”, Injectvisor V50 Control, SPI Robot Interface Euromap 67, Air Blow, Ant-Wear Screw & Barrel, Approx. 4,800 Hours, s/n 86K00709
2018 TOSHIBA ALL ELECTRIC EC390SXIIV50-17 Horizontal Injection Molding Machine, 390 Ton Cap., Shot Size: 27.5 Oz, Platen: 43.7” x 40.6”, Tie Bar: 31.9” x 28.7”, Clamp Stroke: 25.6”, Ejector Stroke: 5.9”, Daylight Max: 55.9”, Injectvisor V50 Control, SPI Robot Interface Euromap 67, Air Blow, Ant-Wear Screw & Barrel, Approx. 6,600 Hours, s/n 86J02703
2018 TOSHIBA ALL ELECTRIC EC390SXIIV50-17 Horizontal Injection Molding Machine, 390 Ton Cap., Shot Size: 27.5 Oz, Platen: 43.7” x 40.6”, Tie Bar: 31.9” x 28.7”, Clamp Stroke: 25.6”, Ejector Stroke: 5.9”, Daylight Max: 55.9”, Injectvisor V50 Control, SPI Robot Interface Euromap 67, Air Blow, Ant-Wear Screw & Barrel, s/n 86J02403
ENGEL HORIZONTAL INJECTION MOLDING MACHINES
(2) 1997/93 ENGEL ES10000/1000AH Horizontal Injection Molder, 1000 Ton Cap., 218 oz Shot Size, Clamp Stroke 39”, s/n’s 0294/1000/97 & 0223-1000-93
(2) 2001 ENGEL EUS 4550/700K Horizontal Injection Molder, 750 Ton Cap., Shot Size 245.4 oz, Clamp Stroke 35.4”, s/n’s 46004 & 46005
(2) 1999/98 ENGEL ES7000/750AH Horizontal Injection Molder, 750 Ton Cap.,132 oz Shot Size, Clamp Stroke 35.4”, Max Daylight 71.6”, s/n’s 0477/750/99, 750/AH 0538
1992 ENGEL ES4400/750AHCC90A03HB Horizontal Injection Molder, 750 Ton Cap., s/n 0145/750/92
2003 ENGEL ES2050/500US-EC100-A03 Horizontal Injection Molder, 500 Ton Cap., s/n 71282500.02
1997 ENGEL ES 2000/500AH Horizontal Injection Molder, 500 Ton Cap., s/n 7896/500/97
1997 ENGEL ES2750/500 Horizontal Injection Molder, 500 Ton Cap., s/n 7885-500-97, 63.6 Oz. Shot Size
(2) 1993 ENGEL ES2500/500 Horizontal Injection Molder, 500 Ton Cap., 129 oz Shot Size, Clamp Stroke 27.5”, Max Daylight 59” s/n’s 5859-800-93 & 6075.50.93
1998 ENGEL ES2000/400BH Horizontal Injection Molder, 400 Ton Cap., s/n 8911-400-98
(2) ENGEL ES 1300/300/96-CC90A03 Horizontal Injection Molder, 400 Ton Cap., s/n’s 7693-400-96 & 3313-300-88
1997 ENGEL ES700/250 Horizontal Injection Molder, 250 Ton Cap., s/n 7953-250-97, 16.6 Oz. Shot Size, 22.44" x 22.44" Tie Bar, 32.68"X32.68" Platen, 575V W/CC90 Control, 55MM Screw
(2) 1993 ENGEL ES700/250 AH Horizontal Injection Molder, 250 Ton Cap., s/n’s 5734/250/93 & 5735/250/93
1993 ENGEL ES700/250 AH Horizontal Injection Molder, 250 Ton Cap., s/n 5735/250/93
1988 ENGEL ES 240/80 - EC88 Horizontal Injection Molder, 80 Ton Cap., s/n 3308-088-88
BATTENFELD INJECTION MOLDING MACHINES
BATTENFELD BA2700A200BK Horizontal Injection Molder, 300 Ton Cap., s/n 52902
(4) 1999/93 BATTENFELD BA 1500/630 BK Horizontal Injection Molder, 165 Ton Cap., s/n’s 54809 & 50223 & 50131 & 48847
2001 BATTENFELD BA1000/315/CDC Horizontal Injection Molder, 110 Ton Cap., s/n 24308
1997 BATTENFELD BA 400/125 CDL Horizontal Injection Molder, 50 Ton Cap., s/n CC40910719783
1999 BATTENFELD BA1100/315H-R Vertical Injection Molder, 125 Ton Cap., s/n 22843
2004 BATTENFELD Plus 350V/75 Vertical Injection Molder, 40 Ton Cap., s/n 27893
ROBOTS
(2) 2018 PROAX LD-60 Mobile Robot w/ Charging Dock & Battery, s/n’s 7530-70046, 7530-70050
2013 STAR AUTOMATION LW-1600V1-480 / STEC-480NC 3-Axis Servo Robot, s/n IX11Q-0596/ 480MK-0604
(3) STAR AUTOMATION LW-1600V1-480NC 3-Axis Servo Robot, s/n’s 1X11Q-0479 & 1X11Q-0351 & 1X11Q-0536
STAR AUTOMATION TW-1500 V1-e-480 3-Axis Servo Robot, s/n 1X15Q-007
(3) STAR AUTOMATION TW-1400V1-480NC 3-Axis Servo Robot, s/n’s 1X11Q-0359 & 1X11Q-0558 & GX11Q-631
STAR AUTOMATION LW-1000V1-480NC 3-Axis Servo Robot, s/n 1X07Q-0525
(2) 2007/06 ENGEL ERC33/1-E-RC100 3-Axis Servo Robot, s/n’s 157766, 158448
2004 ENGEL ERC43/1-E-RC100 3-Axis Servo Robot, s/n 74945
(6) ENGEL ERC33/1-E-RC100 3-Axis Servo Robot, s/n’s 158900 & 163060 & 165644 &165632 &165632 & 74675
BATTENFELD Unirob HTS 400/1000/2200 3-Axis Servo Robot, s/n HTS 4/10/22/1688A
FANUC 6-Axis Robot
2002 ABB IRB4400 6-Axis Robot, s/n 0716.12977120 – 012
CENTRAL DRYING SYSTEM (NEW)
CONAIR DRYING AND CONVEYANCE SYSTEM (NEW, Never Installed) Includes W1000 Dryers, FLX-128 Plus Central Conveying Control, Pumps, Receivers, Fill Sensors, Ratio and Purge Valves, Vacuum Dust Collectors, Resin Selection Stations, Consolidated Resin Drying and More Application: To Dry Various, Free-Flowing, Virgin Pellets Weighing Approx. 35-40lb/FT-AT, A Maximum Total Throughput of 1,400lb/hr w/ A Drying Temperature Range of 250 Degrees F for 4hrs, Utilizing (2) W1000 Carousel Plus Series Dehumidifying Dryers in a RWX Style System w/ Manifolds ($750,000 USD New Purchase Price)
GRANULATORS
ROTOGRAN Granulator, 50HP
ROTOGRAN WO-1418 Granulator, 25HP, 14” x 18” Opening, s/n H14181211264WO
(22) ROTOGRAN PH-1012-SP Granulator, 10HP, 10” x 12” Opening, 2 Fixed 3 Rotor Knifes
ROTOGRAN PH-88 Granulator, 5HP
INJECTION MOLDING SUPPORT EQUIPMENT
(16) Assorted DRI-AIR, CONAIR FRANKLIN, CONAIR, NOVATEC Dryers
(19) Assorted CONAIR FRANKLIN, CONAIR, NOVATEC Dryer Hoppers
(19) Assorted DME, FUZYPRO, MOLD MASTER Hot Runners, 3-12 Zones
(42) Assorted CONAIR, MOULD TEK, NOVATEC Loaders
(57) Assorted CONAIR, AQUATHERM, THERMCARE, SENTRA, ACETRONIC Thermolators
Lot of Approx. (4) Assorted DME PLC Hydraulic Valve Gate Controllers, 8 Valve
Lot of Approx. (46) Assorted Conveyors
=========================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: Friday Septmber 25th, 3pm
A 18% buyers premium will be added to all online purchases,
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00
Removal deadline: TBD
Site Supervisor: GARTH 647-774-3517
Accounting: Victoria 437-994-6586, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
Canadian WIRE TRANSFER INSTRUCTIONS.
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO
Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
Canadian Industrial Services
Don Finkle
Office – 905-372-8333
Cell – 905-376-0233
Email – don@teamcis.ca
National Rigging & Transportation Ltd.
Shane Sewell
Office – 1-866-909-3010
Cell – 905-401-2762
Email – shane@nationalrigging.com
REDMOND & ASSOCIATES
Tony Redmond
3965 Nashua Drive | Mississauga, ON | L4V 1P3
Phone: 905.671.8800 | Facsimile: 905.671.8801
The Yarmouth Group Inc.
9462 Tower Rd, St Thomas, ON N5P 3S7
519-631-2663
2 Day Auction! - Sept 22 & 23rd
Date & Time: Lots starts closing on Tuesday, September 22, 2020 at 11:00 am ET
Location: 400 S Edgeware Rd, St Thomas, ON N5P 3Z5
Inspection Date: Monday September 21st, 9AM - 4PM or By Appointment
Industry: Plastics
18% Buyers Premium applies on all online purchases.
A $2000 refundable security deposit is required upon online registration. See Terms & Conditions Below.
IMPORTANT REMOVAL INFORMATION - COVID-19
Curbside Pickup Available for hand carry & smaller lots. All other lot removals to be coordinated with Site Supervisor or An Approved Machinery Mover.
We will do our upmost to ensure all Customers are as safe as possible during the inspection & removal processes. We encourage you to practice social distancing while on site. Hand sanitizer and gloves will be made available to anyone who enters the auction site.
If you are experiencing any symptoms of illness or have travelled out of county in the last few weeks, please DO NOT attend the auction site.
We will continue to closely monitor this situation as it evolves and apply appropriate responses and actions.
FEATURING:
TOSHIBA HORIZONTAL INJECTION MOLDING MACHINES
2017 TOSHIBA EC1950SXV50-155A Horizontal Injection Molding Machine, 1980 Ton Cap., Shot Size: 273 Oz, Platen: 102.4” x 92.5”, Tie Bar: 72.8” x 65.4”, Clamp Stroke: 66.9”, Daylight Max: 126”, Ejector Stroke: 11.8”, Injectvisor V50 Control, Dual Core Pull Built In Power Pack, Pneumatic Mold Valve Gate 16 Zone, Hydraulic Mold Valve Gate 16 Zone, Hot Runner Mold Master 48 Zone, Screw Anti Wear DBG & Tungsten Carbide Barrel, SPI Robot, Approx. 8,600 Hours, s/n 702112 Purchased New $1,450,000
2015 TOSHIBA ISG1450DWV50-150A Horizontal Injection Molding Machine, 1430 Ton Cap., Shot Size: 277 Oz, Platen: 78.3” x 78.3”, Tie Bar: 55.1” x 55.1”, Daylight Max: 98.4”, Ejector Stroke: 9.8”, Injectvisor V50 Control, Approx. 19,000 Hours, s/n 520903
2018 TOSHIBA ALL ELECTRIC EC500SXIIV50-26A Horizontal Injection Molding Machine, 500 Ton Cap., Shot Size: 43.5 Oz, Platen: 48.4” x 45.7”, Tie Bar: 34.3” x 31.9”, Clamp Stroke: 31.5”, Ejector Stroke: 6.3”, Daylight Max: 63”, Injectvisor V50 Control, SPI Robot Interface Euromap 67, Air Blow, Ant-Wear Screw & Barrel, Approx. 4,800 Hours, s/n 86K00709
2018 TOSHIBA ALL ELECTRIC EC390SXIIV50-17 Horizontal Injection Molding Machine, 390 Ton Cap., Shot Size: 27.5 Oz, Platen: 43.7” x 40.6”, Tie Bar: 31.9” x 28.7”, Clamp Stroke: 25.6”, Ejector Stroke: 5.9”, Daylight Max: 55.9”, Injectvisor V50 Control, SPI Robot Interface Euromap 67, Air Blow, Ant-Wear Screw & Barrel, Approx. 6,600 Hours, s/n 86J02703
2018 TOSHIBA ALL ELECTRIC EC390SXIIV50-17 Horizontal Injection Molding Machine, 390 Ton Cap., Shot Size: 27.5 Oz, Platen: 43.7” x 40.6”, Tie Bar: 31.9” x 28.7”, Clamp Stroke: 25.6”, Ejector Stroke: 5.9”, Daylight Max: 55.9”, Injectvisor V50 Control, SPI Robot Interface Euromap 67, Air Blow, Ant-Wear Screw & Barrel, s/n 86J02403
ENGEL HORIZONTAL INJECTION MOLDING MACHINES
(2) 1997/93 ENGEL ES10000/1000AH Horizontal Injection Molder, 1000 Ton Cap., 218 oz Shot Size, Clamp Stroke 39”, s/n’s 0294/1000/97 & 0223-1000-93
(2) 2001 ENGEL EUS 4550/700K Horizontal Injection Molder, 750 Ton Cap., Shot Size 245.4 oz, Clamp Stroke 35.4”, s/n’s 46004 & 46005
(2) 1999/98 ENGEL ES7000/750AH Horizontal Injection Molder, 750 Ton Cap.,132 oz Shot Size, Clamp Stroke 35.4”, Max Daylight 71.6”, s/n’s 0477/750/99, 750/AH 0538
1992 ENGEL ES4400/750AHCC90A03HB Horizontal Injection Molder, 750 Ton Cap., s/n 0145/750/92
2003 ENGEL ES2050/500US-EC100-A03 Horizontal Injection Molder, 500 Ton Cap., s/n 71282500.02
1997 ENGEL ES 2000/500AH Horizontal Injection Molder, 500 Ton Cap., s/n 7896/500/97
1997 ENGEL ES2750/500 Horizontal Injection Molder, 500 Ton Cap., s/n 7885-500-97, 63.6 Oz. Shot Size
(2) 1993 ENGEL ES2500/500 Horizontal Injection Molder, 500 Ton Cap., 129 oz Shot Size, Clamp Stroke 27.5”, Max Daylight 59” s/n’s 5859-800-93 & 6075.50.93
1998 ENGEL ES2000/400BH Horizontal Injection Molder, 400 Ton Cap., s/n 8911-400-98
(2) ENGEL ES 1300/300/96-CC90A03 Horizontal Injection Molder, 400 Ton Cap., s/n’s 7693-400-96 & 3313-300-88
1997 ENGEL ES700/250 Horizontal Injection Molder, 250 Ton Cap., s/n 7953-250-97, 16.6 Oz. Shot Size, 22.44" x 22.44" Tie Bar, 32.68"X32.68" Platen, 575V W/CC90 Control, 55MM Screw
(2) 1993 ENGEL ES700/250 AH Horizontal Injection Molder, 250 Ton Cap., s/n’s 5734/250/93 & 5735/250/93
1993 ENGEL ES700/250 AH Horizontal Injection Molder, 250 Ton Cap., s/n 5735/250/93
1988 ENGEL ES 240/80 - EC88 Horizontal Injection Molder, 80 Ton Cap., s/n 3308-088-88
BATTENFELD INJECTION MOLDING MACHINES
BATTENFELD BA2700A200BK Horizontal Injection Molder, 300 Ton Cap., s/n 52902
(4) 1999/93 BATTENFELD BA 1500/630 BK Horizontal Injection Molder, 165 Ton Cap., s/n’s 54809 & 50223 & 50131 & 48847
2001 BATTENFELD BA1000/315/CDC Horizontal Injection Molder, 110 Ton Cap., s/n 24308
1997 BATTENFELD BA 400/125 CDL Horizontal Injection Molder, 50 Ton Cap., s/n CC40910719783
1999 BATTENFELD BA1100/315H-R Vertical Injection Molder, 125 Ton Cap., s/n 22843
2004 BATTENFELD Plus 350V/75 Vertical Injection Molder, 40 Ton Cap., s/n 27893
ROBOTS
(2) 2018 PROAX LD-60 Mobile Robot w/ Charging Dock & Battery, s/n’s 7530-70046, 7530-70050
2013 STAR AUTOMATION LW-1600V1-480 / STEC-480NC 3-Axis Servo Robot, s/n IX11Q-0596/ 480MK-0604
(3) STAR AUTOMATION LW-1600V1-480NC 3-Axis Servo Robot, s/n’s 1X11Q-0479 & 1X11Q-0351 & 1X11Q-0536
STAR AUTOMATION TW-1500 V1-e-480 3-Axis Servo Robot, s/n 1X15Q-007
(3) STAR AUTOMATION TW-1400V1-480NC 3-Axis Servo Robot, s/n’s 1X11Q-0359 & 1X11Q-0558 & GX11Q-631
STAR AUTOMATION LW-1000V1-480NC 3-Axis Servo Robot, s/n 1X07Q-0525
(2) 2007/06 ENGEL ERC33/1-E-RC100 3-Axis Servo Robot, s/n’s 157766, 158448
2004 ENGEL ERC43/1-E-RC100 3-Axis Servo Robot, s/n 74945
(6) ENGEL ERC33/1-E-RC100 3-Axis Servo Robot, s/n’s 158900 & 163060 & 165644 &165632 &165632 & 74675
BATTENFELD Unirob HTS 400/1000/2200 3-Axis Servo Robot, s/n HTS 4/10/22/1688A
FANUC 6-Axis Robot
2002 ABB IRB4400 6-Axis Robot, s/n 0716.12977120 – 012
CENTRAL DRYING SYSTEM (NEW)
CONAIR DRYING AND CONVEYANCE SYSTEM (NEW, Never Installed) Includes W1000 Dryers, FLX-128 Plus Central Conveying Control, Pumps, Receivers, Fill Sensors, Ratio and Purge Valves, Vacuum Dust Collectors, Resin Selection Stations, Consolidated Resin Drying and More Application: To Dry Various, Free-Flowing, Virgin Pellets Weighing Approx. 35-40lb/FT-AT, A Maximum Total Throughput of 1,400lb/hr w/ A Drying Temperature Range of 250 Degrees F for 4hrs, Utilizing (2) W1000 Carousel Plus Series Dehumidifying Dryers in a RWX Style System w/ Manifolds ($750,000 USD New Purchase Price)
GRANULATORS
ROTOGRAN Granulator, 50HP
ROTOGRAN WO-1418 Granulator, 25HP, 14” x 18” Opening, s/n H14181211264WO
(22) ROTOGRAN PH-1012-SP Granulator, 10HP, 10” x 12” Opening, 2 Fixed 3 Rotor Knifes
ROTOGRAN PH-88 Granulator, 5HP
INJECTION MOLDING SUPPORT EQUIPMENT
(16) Assorted DRI-AIR, CONAIR FRANKLIN, CONAIR, NOVATEC Dryers
(19) Assorted CONAIR FRANKLIN, CONAIR, NOVATEC Dryer Hoppers
(19) Assorted DME, FUZYPRO, MOLD MASTER Hot Runners, 3-12 Zones
(42) Assorted CONAIR, MOULD TEK, NOVATEC Loaders
(57) Assorted CONAIR, AQUATHERM, THERMCARE, SENTRA, ACETRONIC Thermolators
Lot of Approx. (4) Assorted DME PLC Hydraulic Valve Gate Controllers, 8 Valve
Lot of Approx. (46) Assorted Conveyors
=========================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: Friday Septmber 25th, 3pm
A 18% buyers premium will be added to all online purchases,
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00
Removal deadline: TBD
Site Supervisor: GARTH 647-774-3517
Accounting: Victoria 437-994-6586, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
Canadian WIRE TRANSFER INSTRUCTIONS.
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO
Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.