CNC Lathes, CNC Machining Centers, Mills, Drills, Lathes, Test Equipment and More

Refine your search

Estimate

Filter by Price Range

Category

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 72 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60

Results for live webcast and timed auctions may not have been verified by the auctioneer. If you are in any doubt of the accuracy of the prices provided, please call the auction house to confirm.

Tinius Olsen Model 3000SL 600,000 lb. Universal Test Machine, 600,000 lb-force cap., 26" btwn screws, 9" piston stroke, 9,500,00 lbf-in stiffness,...

MTS Model 312-31 Fatigue Testing Machine, 250 kN (55 kips) cap., 3" col. dia., 25" btwn col., 121" load frame ht., 73.24" max. platen to cross hea...

Instron Universal Testing Machine, S/N NA (Loc.A) ...[more]

Magnaflux Model DR-523 Magnetic Particle Inspection Unit, 3000 amp intermittent output, 600 amp cont. output, 48" headstock to tailstock, 12" coil...

Jones & Lamsom Comparator and Measuring Machine, S/N NA (Loc.A)

Pace Technologies Mega-M250 Manual Abrasive Cut-Off Saw, 10" dia. cut-off wheel, 1.25" arbor, 3400 rpm wheel speeds, 3 hp, 3" max. sample dia., 2....

Jet Vertical Milling Machine, 10" x 50" tbl, 3 T-slots, 720 lbs. load cap., 70 - 3800 rpm spdl speeds, 3 hp, R-8 spdl taper, 5" spdl trvl, 1/8" - ...

Wells-Index Model 847 Vertical Milling Machine, 10" x 48" tbl, 3 T-slots, 50 - 4200 rpm spdl speeds, 3 hp, R-8 spdl taper, 6" spdl trvl, 0.0015, 0...

Haas VF-1 CNC Vertical Machining Center, new 1996, 14" x 26" tbl, 3000 lbs. load cap., 20" X trvl, 16" Y trvl, 20" Z trvl, 4" - 24" spdl to tbl, C...

Yoshikawa Model YOS-16 Vertical Spindle Rotary Surface Grinder, 16" dia. mag. chuck, 7.87" max. spdl movement, 10" dia. grinding wheel, 8" under w...

Van Norman Model 444 Horizontal Spindle Rotary Surface Grinder, 12" chuck, 8" height cap., 8" under wheel, S/N NA (Loc. A) ...[more]

Haas VF-0E CNC Vertical Machining Center, 14" x 36" tbl, 30" X trvl, 16" Y trvl, 20" Z trvl, 7500 rpm spdl speeds, 20 hp, CAT 40 spdl taper, 20 st...

Gorbel 3 Ton cap. jib crane, 12' crane height, 20' span, Loadmaster LM 16 hoist (new in box), S/N NA (Loc. A) ...[more]

Car Bottom Double End Load Furnace, S/N NA (Loc. A)

36" Babin Automatic Bolt Circle Drill, 4" - 36" bolt cir. range, 4 - 24 std. div. of equal spaced holes, 2.125" max. drilling cap., 6" stroke, 150...

24" Babin Automatic Bolt Circle Drill, 4" - 24" bolt cir. range, 4 - 24 std. div. of equal spaced holes, 1.5" max. drilling cap., 6" stroke, 150 -...

Cincinnati No. 3MI Universal Table Horizontal Mill, 14" x 62" table, 25 - 1500 rpm spindle speeds, #50 taper, arbor support, 1.5" arbor and spacer...

12" Cushman 4-Jaw Chuck, D1-6 mount, S/N NA (Loc. A)

12" Cushman 3-Jaw Chuck, D1-6 mount, S/N NA (Loc. A)

Brown & Sharpe, 36" centers (Loc. A)

Enerpac 6" Vise, mdl. VP 6, S/N 0L7 (Loc. A)

Bridgeport 6" Vise, S/N NA (Loc. A)

Kurt 6" Vise with Swivel Base, S/N NA (Loc. A)

Schmidt Tempo Type K4 Manual Saw Blade Grinder, S/N 1764 (Loc. A)

Mazak VTC-20B CNC Vertical Turning Center, Mazatrol PC Fusion 640M CNC, 57.4" x 20.08" tbl, 44" X trvl, 20.8" Y trvl, 22.05" Z trvl, 7000 rpm, 15 ...

Hitachi Seiki Model HT25G CNC Slant Bed Lathe, Seicos L Multi CNC control, 24" swg over bed, 16" max. turning dia., 2.5" bar cap., 20 - 3600 rpm, ...

Hitachi Seiki Model HT25S CNC Slant Bed Lathe, Seiki Multi CNC control, 20" swg over bed, 10" max. turning dia., 24" max. machining length, 2.5" b...

Hitachi Seiki Model HT25S CNC Slant Bed Lathe, Seicos L Multi CNC control, 20" swg over bed, 10" max. turning dia., 24" max. machining length, 2.5...

Hitachi Seiki Model HT25S CNC Slant Bed Lathe, Seicos L Multi CNC control, 20" swg over bed, 10" max. turning dia., 24" max. machining length, 2.5...

Haas TL-3B CNC Lathe, new 2014, 24" 4-jaw rear chuck with 10" through hole, 25" 3-jaw front chuck with 10" through hole, 40 hp mtr, Dorian V60TC t...

Kent Model KGS-410/AHD Surface Grinder, new 1985, 16" x 41.75" magnetic chuck, 23.6" under wheel, 13 - 70 fpm tbl speeds, 5 hp wheel head mtr, 6 i...

3' x 11" Carlton Model 1A Radial Arm Drill, from US Airforce Surplus, drills to center of 72" circle, 3' arm, 11" dia. col., 12" - 52" under arm, ...

3A Warner & Swasey M-3500 Ram Type Turret Lathe, 21" 3-jaw chuck, 851 rpm spdl speeds, 40 hp mtr, fixed rear turret, 440 volt, ways in excellent c...

42" King Model M-42 Vertical Turret Lathe, new 1953, 42" tbl, 4-jaw chuck, 47.5" swg with side head above table, 37" under rail, 25" cross rail tr...

10" x 72" Norton Model C Plain Cylindrical Grinder from US Airforce Surplus Storage, 10" swg, 72" centers, 2 - 240 ipm hyd. tbl trvl, 10 hp mtr, v...

Cincinnati #3 Horizontal Mill with Universal Head, rebuilt 1961, 16" x 64.75" tbl, 34" tbl long. trvl, 16" cross trvl, 16" knee vert. trvl, 1" - 1...

21" x 120" JMK 530 Engine Lathe, (Mazak / Kingston copy), 21" swg over bed, 120" centers, 4.1" spdl bore, 16" 4-jaw chuck, tool post, 2 speed tail...

36" x 120" Summit Engine Lathe, 36" swg over bed, 26" over cross slide, 44" in gap, 120" centers, 6" spdl bore, 24" 4-jaw chuck with 6" through ho...

4" Portage Horizontal Boring Mill, 4" spdl, No. 6 Morse taper, 36" x 60" tbl, 17 - 611 rpm spdl speeds, 60" X trvl, 48" Y trvl, 60" Z trvl, 36" sp...

5A Warner & Swasey Model M-3600 Square Head Saddle Type Turret Lathe with Cross Sliding Rear Turret, 9” spdl hole, 75 hp mtr, 32” 4-jaw chuck, S/N...

4A Warner & Swasey Lever Head Saddle Type Turret Lathe, 28.25" swg over bed, 22" over carriage, 62" centers, 12.5" spdl bore, 8 - 210 rpm, 40 hp, ...

74" Bullard Cutmaster Vertical Turret Lathe, 74” table, 78” swg w/ side hd working, 62” under rail, 50” rail adj., 1.2 - 90 rpm, 30 hp mtr, R.H. r...

74" Bullard Cutmaster Vertical Turret Lathe, 74” table, 78” swg w/ side hd working, 62” under rail, 50” rail adj., 1.2 - 60 rpm, 30 hp mtr, R.H. t...

66" Bullard Dynatrol Vertical Turret Lathe, 66" table (4 jaws), 78" swg, 72" under rail, 50" cross rail vert. trvl, 2.3 - 83.3 rpm, 50 hp, 2 rams,...

120" Dia. Cap. Lombard Radial Axial Ring Mill, 120” max. ring dia., 24” max. ring thickness, 300 hp radial roll drive mtr, 75 hp hyd. axial roll d...

Carbide Saw-Mill Company Model 400 Billet Saw, 14” cap., infeed and outfeed tables, S/N 567 (Loc. E)

5" Giddings & Lewis Fraser Model 70A-D5-T Table Type Horizontal Boring Mill, 5" spdl dia., 60" x 120" tbl, 120" tbl cross trvl, 72" tbl long. trvl...

17" x 60" Clausing Colchester Engine Lathe, 17" swg over bed, 10.5" over cross slide, 60" centers, 16 spdl speeds, 20 - 1600 rpm, 7.5 hp, D1-8 spd...

16" x 60" Harrison Model M400 Engine Lathe, 16.5" swg over bed, 10" cross slide, 60" centers, 18 spdl speeds, 40 - 2000 rpm, 10 hp, D1-8 camlock s...

15" DoAll Model 190 Engine Lathe, S/N NA (Loc. F) ...[more]

Jet (Lin Huan) LHT-25B Engine Lathe, 10.25" swg over bed, 6.5" over cross slide, 1" max bar cap., 3.75" max. chucking dia., 1-1/16" 5C max. collet...

Bridgeport Series II R2E3 CNC Vertical Milling Machine, S/N NA (Loc. F) ...[more]

DoAll Vertical Milling Machine, 12" x 49" tbl, 31.5" tbl long. trvl, 15.75" cross trvl, 17.625" knee vert. trvl, NS 40 spdl nose, 60 - 4350 rpm sp...

Nissin Model NST-40/125 CNC Lathe, 26” sw over bed, 21” sw over cross slide, 49” btwn ctrs, 60 hp spdl mtr, 10 – 2000 rpm spdl speeds, 15” hyd. ch...

Savage 30 HP Model WJS-20 Wet Type Abrasive Cut-Off Saw, new 1998, 18" blade dia., 1600 rpm spindle speed, 30 hp main drive mtr, 52" blade gantry ...

20" x 60" Acer Dynamic Model 2060GH Engine Lathe, 20" swg over bed, 13" over cross slide, 27.1" in gap, 60" centers, 18 spdl speeds, 20 - 1500 rpm...

Chengdu (Lincoln) ZD5(L)-630 Welding Power Source, new 2016, 240/3/60 input power, 630A/44V rated output at 100%, 125-630A current adj. range, CC ...

Miller SRH-333 DC Arc Welding Power Source, 230/460 volts, 58/29 amps, 15 kW, 3 phase, 60 Hz, S/N HK323138 (Loc. A)

Miller SRH-333 DC Arc Welding Power Source, 230/460 volts, 58/29 amps, 15 kW, 3 phase, 60 Hz, S/N HK323132 (Loc. A)

Miller SRH-333 DC Arc Welding Power Source, 230/460 volts, 58/29 amps, 15 kW, 3 phase, 60 Hz, S/N HK323137 (Loc. A)

Loading...Loading...
  • Lots per page
  • 60

Recently Viewed Lots