Refine your search

Estimate

Filter by Price Range

Category

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 178 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Mazak Dyna-Turn 3L CNC Lathe, Mfd. 1980, 14.75" max. cutting dia., 10" max. machining length, 12" 3-jaw hyd. chuck, A2-8 spindle nose, 20 hp spind...

Mazak Dyna-Turn 3L CNC Lathe, Mfd. 1980, 14.75" max. cutting dia., 10" max. machining length, 12" 3-jaw hyd. chuck, A2-8 spindle nose, 20 hp spind...

Mazak Dyna-Turn 3L CNC Lathe, Mfd. 1980, 14.75" max. cutting dia., 10" max. machining length, 12" 3-jaw hyd. chuck, A2-8 spindle nose, 20 hp spind...

Mazak Dyna-Turn 3L CNC Lathe, Mfd. 1980, 14.75" max. cutting dia., 10" max. machining length, 12" 3-jaw hyd. chuck, A2-8 spindle nose, 20 hp spind...

Lot of miscellaneous lathe tooling including turning tooling, boring bars, sleeves, top jaws, and Mazak Dyna-Turn 3L tool holders

Lot of (2) two Lista Tool Cabinets, 28" x 28", includes contents, on heavy duty roller cart

Mazak Dyna-Turn 4L CNC Lathe, Mfd. 1980, 14.75" max. cutting dia., 10" max. machining length, 12" 3-jaw hyd. chuck, A2-8 spindle nose, 20 hp, 13 -...

Mazak Dyna-Turn 5L CNC Lathe, Mfd. 1980, 30" swing, 15" cutting dia., 15" 3-jaw hyd. chuck, A1-15 spindle nose, 3" spindle bore, 60 hp spindle mot...

Two (2) 3-drawer Lista Cabinets, with steel tops, on heavy duty carts

Mazak Dyna-Turn 5L CNC Lathe, Mfd. 1980, 30" swing, 15" cutting dia., 15" 3-jaw hyd. chuck, A1-15 spindle nose, 3" spindle bore, 60 hp spindle mot...

Mori Seiki SL-35 CNC Slant Bed Lathe, Mfd. 1991, 23.6" swing over bed, 16.5" max. turning dia., 35" between centers, 30.7" max. turning length, 12...

Lot of miscellaneous tooling for Mori Seiki SL-35B, 2 cabinets including hard and soft top jaws and tooling

Haas SL-20T CNC Slant Bed Lathe, Mfd. 2003, Haas CNC control, 23" swing over front apron, 9.5" swing over cross slide, 10.3" max. turning dia., 20...

Hitachi Seiki Hitec-Turn HT-20 CNC Lathe, 15" swing over bed, 30" centers, 25.2" max. turning length, 8.25" max. turning dia., A2-6 spindle nose, ...

Lista 2 Drawer Cabinet on Rollers, includes misc. tooling and chuck jaws for Hitachi Seiki lathe

10" x 20" Monarch Model EE Turret Lathe, 12.5" swing over bed, 7" swing over cross slide, 20" between centers, 6" 3-jaw chuck, D1-3 Camlock spindl...

Includes Aloris CX tool holders (up to 1-1/2"), Camlock mount collet holders, 3-jaw chuck, small collet holder (up to 1")

21" x 54" Clausing Colchester Electronic Mastiff CNC Lathe, Mfd. 1996, 21" swing over bed, 14-1/2" swing over cross slide, 54" between centers, 15...

21" x 60" Kingston Model HL-1500 Engine Lathe, Mfd. 1981, 21" swing over bed, 13-1/8" swing over cross slide, 60" between centers, Morse #5 spindl...

Warner & Swasey 4 AC M-3950 CNC Lathe, 19.5" swing, 24" 3-jaw power wrench chuck with 9.25" hole, 40 hp spindle motor, 2 speed ranges, 13 - 706 rp...

Lot of miscellaneous tooling and tool holders, including Landis taps, chuck jaws, and more

Warner & Swasey 2 SC M5060 CNC Lathe, Model AB 7360, 24.5" swing over turret bar, 16.5" swing over turret face, 26.5" longitudinal work area, 12" ...

Fadal VMC 6030 CNC Vertical Machining Center, Model 907-1, Fadal 88HS CNC control, 62.5" x 30" table, 3500 lbs. table load cap., 60" table longitu...

Lot of assorted tool cabinets and tables, including 2 machinist cabinets, 1 marking table, 1 two-drawer Vidmar rolling cabinet with CAT 40 tool ho...

Lista 7 Drawer Tool Cabinet, on heavy duty roller cart with steel top and vise, includes contents

Haas Mini Mill CNC Vertical Machining Center, Mfd. 2001, 12" x 36" table, cat 40 spindle, 6000 rpm, 7.5 hp spindle motor, 16" X axis travel, 12" Y...

Lista 5 Drawer Machinist Cabinet with contents, Tool Cart with approximately 50 CAT 40 tool holders

Toyoda FH50 CNC Horizontal Machining Center, Mfd. 1990, Fanuc 15M CNC control, 21.5" x 21.5" pallet, 2 pallets, 1760 lbs. pallet load cap., 0.001 ...

Lot of approximately 100 CAT 50 Taper Tool Holders with 2 roll around carts and 2 pallets

Lista 4 Drawer Cabinet, contents include misc. CAT 50 tool holders

46" Bullard Dynatrol VTL, 46" dia. table (2 master jaws missing), 58" swing, 40" under rail, 313 rpm max. table speed (main table motor missing), ...

DoAll Model C-1216A Automatic Horizontal Bandsaw, 12" x 16" rect. cap., 15" rounds, 5 hp motor, 1" x 162" x 0.035" saw band, shuttle vise, 10' inf...

DoAll 1612-0 Vertical Bandsaw, 16" throat, 12" height under guides, 24" x 24" tilting table, 50 - 400 SFPM low speed, 200 - 5200 SFPM high speed, ...

Startrite H250A Automatic Horizontal Bandsaw, 10" x 10" cap., 5 blade speeds, 50 - 300 SFPM, 2 hp blade motor, 1" x 126" x 0.035" blade, electric ...

Birmingham Model BPV-164 Vertical Mill, Mfd. 2002, 10" x 54" table, 800 lbs. table load cap., 34.25" longitudinal table travel (power feed), 18" c...

Acer Model X6323 Vertical Mill, Mfd. 2005, 9" x 42" table, R-8 spindle taper, 3 hp (vector drive head), 60 - 4500 rpm, power cross feed, 28" table...

Cincinnati Milacron Model DL 425-185 Hypowermatic Duplex Mill, 18" x 92" table, 18" x 84" work surface, 48" table long. travel, 18" spindle head v...

Cincinnati Milacron Model DL 550-224 Hypowermatic Duplex Mill, 22" x 82" table, 22" x 72" work surface, 48" table long. travel, 24" spindle head v...

Cincinnati Duplex Mill, 22" x 82" table, 22" x 72" work surface, 72" table long. travel, 24" spindle head vert. travel, #50 NSTD spindle taper, 50...

Cincinnati Duplex Mill, 22" x 106" table, 22" x 96" work surface, 72" table long. travel, 24" spindle head vert. travel, #50 NSTD spindle taper, 5...

Lot 28A

Lot of Tooling

Lot of Tooling, includes, face mill and step mill holders, fixture plates

Lot 29

Simplex Mill

Simplex Mill, heavy duty 3 headed milling machine (1 head on right, 2 heads on left), 1 head at rear with raise & lower, servo feeds in all direct...

Churchill-Redman Model EC230 Facing and Centering Machine, 2" max. face dia., 30" between centers, two 3 hp motors, one 2 hp motor, 8 spindle spee...

4' 11" Cincinnati Bickford Radial, 4' arm, drills to center of 96" circle, 11" col. dia., 3.75" spindle, No. 5 taper, 5 hp motor, 36 spindle speed...

4' 13" Ooya RE 1225 Radial Drill, drills to center of 98.75" circle, 12-5/8" col. dia., 11-5/8" - 49-3/8" col. face to spindle ctr., #5 MT taper, ...

Wis-Matic Model A6 Drill, 1.25" drilling cap. (steel), 0" - 6" stroke adj., 0.25 - 75 ipm advance feed rate, 240 ipm advance rapid rate, 0.25 - 60...

Wis-Matic Model A6 Drill, 1.25" drilling cap. (steel), 0" - 6" stroke adj., 0.25 - 75 ipm advance feed rate, 240 ipm advance rapid rate, 0.25 - 60...

Brother Hi-Tap Model BT6-311 Automatic Tapping Machine, 1.96" max. spindle stroke, 13" swing, 0.12" - 0.32" tapping cap. (steel), 10.2" max. head ...

Brother Hi-Tap Model BT6-311 Automatic Tapping Machine, 1.96" max. spindle stroke, 13" swing, 0.12" - 0.32" tapping cap. (steel), 10.2" max. head ...

Brother Hi-Tap Model BT7-321 Tapper, 0.31" - 2.56" spindle stroke, 17.7" swing, 0.20" - 0.63" tapping cap. (mild steel), 11.8" max. head travel, 1...

Brother Hi-Tap Model BT71-521 Tapper, 0.31" - 2.56" spindle stroke, 17.32" swing, 5-16" - 5/8" tapping cap. (mild steel), 11.81" max. head travel,...

Brother Hi-Tap Model BT71-521 Tapper, 0.31" - 2.56" spindle stroke, 17.32" swing, 5-16" - 5/8" tapping cap. (mild steel), 11.81" max. head travel,...

Brother Hi-Tap Model BT71-521 Tapper, 0.31" - 2.56" spindle stroke, 17.32" swing, 5-16" - 5/8" tapping cap. (mild steel), 11.81" max. head travel,...

Brother Hi-Tap Model BT81-531 Tapper, 0.31" - 2.56" spindle stroke, 17.32" swing, 3/8" - 1-1/8" tapping cap. (mild steel), 11.81" max. head travel...

Pneumatic Slotter with variable speed cutter

Chas Allen Drill & Tap Machine, 4" spindle drill station, 24" x 84" table, power table movement, 2000 rpm, 2 hp (each head), S/N 34932

48 Spindle Belden Multi Spindle Drilling and Tapping Machine, S/N

Loading...Loading...
  • Lots per page
  • 60

Recently Viewed Lots