Assorted holding clamps to include: (2) 12 inch C-clamps, (1) Williams CC-406 6 inch, (1) Jorgenson 8", (1) 20" quick clamp, (4) stay clamps ...[...

(4) assorted live centers with morse taper 5 shank, Enco The Head Tool and other brand, MT adapters ...[more]

(5) assorted live and dead centers to include: Jacobs Chuck 37KD 1/4 to 3/16 capacity, assorted morse taper adapters, (1) live bull nose, (1) dead...

(4) assorted live and dead centers to include: (1) Jacobs chuck 18N 1/8to 3/4 capacity with MT adapters, (1) Archer Live center with MT4 shank, (1...

(4) Assorted Live and dead centers to include: (1) live center with morse taper 5 shank, (1) dead center with MT5 shank and MT6 adapter, (1) Live ...

Assorted Lathe tools to include: Lathe Dogs, Cam-locks 1" diameter, assorted adapter rings, dead centers and more

(5) assorted live and dead centers with MT4 shanks to include: (1) Live the ready tool company, (1) live center, (3) dead centers

(6) assorted live and dead centers to include: (1) Royal super double bearing live center MT4, (3) MT3 dead centers, (1 MT3 dead center, (1) MT2 d...

112 inch shop built v-shaped welding table, located outside along East side of building ...[more]

Approximately 45 x 43 inch pallet racking wire shelves, located outside along West side of building ...[more]

Approximately 43 x 58 inch pallet racking wire shelves, some smaller panels, located outside along West side of building

Roura Self Dumping Hopper, Approximate Inside Dimensions 46 x 36 x 24 inches Lift & Load Charge $25 This is for a basic lift and load with a sch...

Roura Self Dumping Hopper, Approximate Inside Dimensions 46 x 36 x 24 inches Lift & Load Charge $25 This is for a basic lift and load with a sch...

Heavy Duty Marvel Type Conveyor 24" x 20' (two 10' sections) Adjustable Height, Includes (4) Yellow Loading Stands (used in conjunction with DoAll...

Used on Marvel Saw Cart not included ...[more]

Used on DoAll Saw Assorted Band saw blades to include: (6) Honsberg Spectra, 1-3/8 x .042 x 8/12 TPI S BI/M42, (1) Honsberg Spectra, 1-3/8 x .042 ...

Heavy Duty Marvel Type Conveyor 24" x 10' Adjustable Height, Includes (2) Yellow Loading Stands (used in conjunction with Marvel Saw) Lift & Load...

12" 3-jaw chuck, flat mount, 7-3/4" inset ring

18" 3-jaw chuck, flat mount, 11-7/8" inset ring

Cushman 12" 3-jaw chuck, flat mount, 7" inset ring, model no. 1862

Pratt Bernerd 12" 3-jaw chuck, flat mount, 7-1/2" inset ring, catalog no. 1-950-33121

Pratt Bernerd 12" 3-jaw chuck 1" diameter cam-lock mount, 8" cam-lock ring, catalog no. 9219-01390

Cushman 15" 4-jaw chuck, thread mount approximate 6" outside thread diameter, Model No. 15

Rohm 19-1/2" 4-jaw chuck, 1-1/4" diameter cam-lock mount, 9-3/8" between cam-lock centers

Lathe steady rest, approximate 5" diameter capacity, base to top 16", 8-1/2" bed width, includes attachment adapter and holding plate

Angle plate with pneumatic clamp setup with v-plate, overall dimensions 9 x 15 x 16-7/8 inches

(2) CVS V-blocks, 6 x 6 x 8 inches

Angle plate 8 x 12 x 17-1/2 inches

adjustable angle plate, 6-bolt angle settings, drilled and tapped face 8 x 16-1/4 inches, 20-1/2 inch between mounting holes

Adjustable angle plate, approximate 10 x 12 inch t-slotted surface on one side and 10 x 12 inch slotted on other side   ...[more]

(3) assorted v-blocks to include: (1) approximate 3 x 6 x 10 inches, (1) 4 x 4 x 6 inches, (2) 3 x 3 x 4 inches

(2) v-blocks 7-5/8 x 7-3/4 x 8 inches

(3) angle plates to include: 5-1/2 x 8 x 10 inches, (1) 5-3/4 x 8-1/4 x 10-3/4 inches, (1) 6 x 8 x 10 inches

(2) angle plates 5-1/2 x 12 x 20 inches

Angle plate 10-1/4 x 13 x 15-1/2

Angle plate 14 x 18 x 18 inches

angle plate approximate 17 x 19 x 27-1/2 inches

Angle plate without welded extensions approximate 9-3/4 x 15 x 15-1/4 inches

Drilled and tapped circle plate, 18-1/2 inch diameter x 1-3/8 inch thick

The D.C. Morrison Co angle fixture, 9 x 21-5/8 inch surface, 23 inch between mounting holes

Brown & Sharpe Permanent Magnetic chuck, 6 x 18 inch, model no. 618, serial no. 18077 ...[more]

(6) assorted anti-fatigue mats up to 38 x 64 inches

(7) assorted round shank tool holders up to 3 inch diameter

12’, 4 WAY PRESS BRAKE DIE OVERALL LENGTH: 12’ WIDTH/HEIGHT: 5-1/4”X5-1/4”FLAME HARDENED STEEL 4 SIDED DIE OPENING 1) 1” 1) 1-1/4” 1) 3” 1) 3-1/2”...

Rack with assorted Press Brake Dies  Uppers and Lowers up to 12' 4" x 3-1/2" x 12' x 1/2" slot lower die holder and more as shown with rack Lift ...

1F, 7/8F, 3/4E, 5/8E, 1/2D, 3/8D, 3/8C, 5/16C, 3/16B

3/8I, 5/16H, 1/4E, 3/16D, 1/8A

DuMont 5/8SC. Pilot 21/32 and (2) other broaches

Fram Fram offers Fed-Ex and USPS shipping for small items. Please notify us by the end of business Friday, March 12 to request shipping. The cost ...

All with defects, 3/4, (2) 3/8, 5/16H, unmarked E, 3/16D, unmarked D

(2) with defects, 5/8E, 3/8C, 3/16B

Contents of 2 drawers in cabinet no. 5

racks have document holders Lift & Load Charge $25 This is for a basic lift and load with a scheduled appointment only. This charge will be auto...

Lift & Load Charge $25 This is for a basic lift and load with a scheduled appointment only. This charge will be automatically added to your invoi...

Meco Model BCT96-10 Bar Cradle Cart 10,000 lb Capacity, 96" long 4 Cradles, 316 lbs Overall Dim 28"x96"x29" Lift & Load Charge $25 This is for a...

Meco Model BCT96-10 Bar Cradle Cart 10,000 lb Capacity, 96" long 4 Cradles, 316 lbs Overall Dim 28"x96"x29" Lift & Load Charge $25 This is for a...

Meco Model BCT96-10 Bar Cradle Cart 10,000 lb Capacity, 96" long 4 Cradles, 316 lbs Overall Dim 28"x96"x29" Lift & Load Charge $25 This is for a...

Lift & Load Charge $25 This is for a basic lift and load with a scheduled appointment only. This charge will be automatically added to your invoi...

Lift & Load Charge $25 This is for a basic lift and load with a scheduled appointment only. This charge will be automatically added to your invoi...

Lift & Load Charge $25 This is for a basic lift and load with a scheduled appointment only. This charge will be automatically added to your invoi...