Lot

24

Protein Chip Manufacturing Line

In Nutra, Pharma, and Packaging Equipment Multip...

Please log in or sign up to place a bid.
This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 818-495-3038 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/26
Protein Chip Manufacturing Line - Image 1 of 26
Protein Chip Manufacturing Line - Image 2 of 26
Protein Chip Manufacturing Line - Image 3 of 26
Protein Chip Manufacturing Line - Image 4 of 26
Protein Chip Manufacturing Line - Image 5 of 26
Protein Chip Manufacturing Line - Image 6 of 26
Protein Chip Manufacturing Line - Image 7 of 26
Protein Chip Manufacturing Line - Image 8 of 26
Protein Chip Manufacturing Line - Image 9 of 26
Protein Chip Manufacturing Line - Image 10 of 26
Protein Chip Manufacturing Line - Image 11 of 26
Protein Chip Manufacturing Line - Image 12 of 26
Protein Chip Manufacturing Line - Image 13 of 26
Protein Chip Manufacturing Line - Image 14 of 26
Protein Chip Manufacturing Line - Image 15 of 26
Protein Chip Manufacturing Line - Image 16 of 26
Protein Chip Manufacturing Line - Image 17 of 26
Protein Chip Manufacturing Line - Image 18 of 26
Protein Chip Manufacturing Line - Image 19 of 26
Protein Chip Manufacturing Line - Image 20 of 26
Protein Chip Manufacturing Line - Image 21 of 26
Protein Chip Manufacturing Line - Image 22 of 26
Protein Chip Manufacturing Line - Image 23 of 26
Protein Chip Manufacturing Line - Image 24 of 26
Protein Chip Manufacturing Line - Image 25 of 26
Protein Chip Manufacturing Line - Image 26 of 26
Protein Chip Manufacturing Line - Image 1 of 26
Protein Chip Manufacturing Line - Image 2 of 26
Protein Chip Manufacturing Line - Image 3 of 26
Protein Chip Manufacturing Line - Image 4 of 26
Protein Chip Manufacturing Line - Image 5 of 26
Protein Chip Manufacturing Line - Image 6 of 26
Protein Chip Manufacturing Line - Image 7 of 26
Protein Chip Manufacturing Line - Image 8 of 26
Protein Chip Manufacturing Line - Image 9 of 26
Protein Chip Manufacturing Line - Image 10 of 26
Protein Chip Manufacturing Line - Image 11 of 26
Protein Chip Manufacturing Line - Image 12 of 26
Protein Chip Manufacturing Line - Image 13 of 26
Protein Chip Manufacturing Line - Image 14 of 26
Protein Chip Manufacturing Line - Image 15 of 26
Protein Chip Manufacturing Line - Image 16 of 26
Protein Chip Manufacturing Line - Image 17 of 26
Protein Chip Manufacturing Line - Image 18 of 26
Protein Chip Manufacturing Line - Image 19 of 26
Protein Chip Manufacturing Line - Image 20 of 26
Protein Chip Manufacturing Line - Image 21 of 26
Protein Chip Manufacturing Line - Image 22 of 26
Protein Chip Manufacturing Line - Image 23 of 26
Protein Chip Manufacturing Line - Image 24 of 26
Protein Chip Manufacturing Line - Image 25 of 26
Protein Chip Manufacturing Line - Image 26 of 26
Current bid
bids
Reserve not yet met
Your max bid
USD
Please enter your maximum bid
Place Bid
USD

Your bid is pending
10.25%
18.00%
Register to bid online Register to bid online
You're registered for this auction
Waiting for registration approval
Registration has been declined
., California
Auctioneer has chosen not to publish the price of this lot
., California
10.25%
18.00%

1 Used Protein Chip Manufacturing Line  

Includes: 

MJK0335 Schenck Accurate Feeder
1 Used Schenck Accurate Feeder

MDL: 110023361-10A
S/N: PFPPB6-001
Type: MID MLCH
MFG. Date: 2013
Screw Diameter: 1.5”
HP: 0.5 hp,
Volts: 230-460
RPM: 1725
Dimensions: 62”L x 32”W x 50”H 

General Info:

The AccuRate® series volumetric feeding systems are available for every feeding application. Their most outstanding properties are their economy and flexibility, as well as their ease of integration into existing production lines. With feed rates ranging from approximately 0.000017 to 280ft3/h (0.1/h to 8,000I/h), the feeding system can be used for continuous feeding, charging, and batching. It can process bulk solids with a particle size of up to 10 mm. Model 10 The AccuRate® Model 10 is easily disassembled for cleaning or for applications that require separate hoppers for different materials. The Tuf-Flex™ hopper in the Model 10 can be changed in less than two minutes without tools. Further advantages The AccuRate® Series volumetric feeders come equipped with easy to remove outside panels, stainless steel construction, lifetime lubricated bearings, double shaft seals to prevent powder leakage, gasketed covers, and vinyl hoppers that are agitated on the exterior for gentle product discharge. A large inlet prevents bridging and the rounded corners on the vinyl hopper help provide an uninterrupted flow.
PDF: https://www.schenckprocess.com/data/us/files/83/Catalog-81.-AccuRate-Volumetric-Series-Feeders.pdf

MJK0336 Reading Baking Solutions Clam Shell Continuous Mixer
1 Used Reading Baking Solutions Clam Shell Continuous Mixer 

MDL: 0x001-000-2013-7099
S/N: J115043-040
Dimensions: 6.5” opening at the top, 77”L of shell, 18” diameter,
Length of blades: 6.5”
Rectangular outlet: 13.25” x 9.5” 
VAC: 480
Hz: 60
Amps: 50
Phase: 3
Overall Dimensions: 120” L x 52” H

General Info: 

These continuous processors feature an optional clamshell barrel design that opens quickly and easily to access the paddles and screws for cleaning, inspection, and/or adjustments to the configuration. Opening automatically at the push of a button, the proprietary clamshell barrel design uses hydraulic power to raise the barrel and expose the interior, while also locking the barrel safely in place. The design eliminates the cranes, hoists, and other equipment needed to access the screws and paddles using traditional barrel designs along with their need for extra floor space as temporary barrel storage during cleaning and maintenance. Developed for food, plastics, chemical, pharmaceutical, and other processors, the clamshell design speeds the changeover process and promotes complete cleaning to virtually eliminate the potential for cross-contamination. The clamshell design is suitable for automatically mixing, compounding, reacting, crystallizing, encapsulating, preconditioning, and other processes that require multiple powdered, liquid, and viscous materials to be combined into a uniform, homogeneous product. The clamshell design is custom-engineered with the continuous processor for each installation to accommodate nearly any material including abrasives, corrosives, and materials requiring FDA, USDA, and/or 3A compliance. This Clam Shell Mixer was used in the process of creating protein chips 

MJK0337 Reading Baking Systems Rotary Presser/Sheeter
1 Used Reading Baking Systems Rotary Presser/Sheeter

MDL: SH202-048-2013-7102
S/N: J115043-070 
MFG: Reading Baking Systems
VAC: 480
Phase: 3
Hz: 60
Amps: 10
Dimensions: 132”L x 110”W x 102”H

General Info: 

The Thomas L. Green 2-Roll Sheeter creates a consistent dough sheet ready for dough forming or further reduction. Two powered stainless steel rolls rotate toward one another and draw raw dough into a single sheet with consistent characteristics and thickness. The stainless steel rolls are manufactured to precise tolerances of concentricity in order to maintain consistent dough sheet formation. Features:  Roll gap distance can be measured and monitored during production Separate direct drives for independent roll control Sheet thickness can be adjusted during production Easy access for maintenance and inspection Hopper level sensing for an accurate hopper fill.

MJK0338 Reading Baking Systems Rotary Cutter with extra dies
1 Used Reading Baking Systems Rotary Cutter With Extra Dies

MFG: Reading Baking Systems
Overall Dimensions: 172”L x 70”W x 78” Height
Conveyor Height: 46”H

General Info: 

The Rotary Cutting Station accurately and continuously cuts distinct product shapes out of a single dough sheet. An integrated conveyor system moves the product through - and is pressured against - a rotating die assembly. Operators can adjust the pressure on the dough sheet during operation to ensure a thorough cut and consistent piece production. Features:  May be designed with two or more die rolls for complex shape production or used independently for different products on the same line. An integrated scrap removal system may be mounted on the discharge end of the machine. Scrap dough can be discharged and re-routed to the dough handling system for reuse. The gap between the conveyor and die roll and the pressure exerted on the conveyor belt is adjustable. Dough sheet thickness is typically between .89mm (.035”) and 1.65mm (.065”) prior to cutting, but thicker sheets may be accommodated. Die rolls can be engraved bronze, coated metals, or plastic cups

Website: https://www.readingbakery.com/rotary-cutting-station-bakery-equipment.html 

MJK0339 Transfer Conveyor
1 Used Transfer Conveyor

Overall Dimensions: 140”L x 55”W x 46”H
Belt Width: 49”W

Location: El Monte, CA

1 Used Protein Chip Manufacturing Line  

Includes: 

MJK0335 Schenck Accurate Feeder
1 Used Schenck Accurate Feeder

MDL: 110023361-10A
S/N: PFPPB6-001
Type: MID MLCH
MFG. Date: 2013
Screw Diameter: 1.5”
HP: 0.5 hp,
Volts: 230-460
RPM: 1725
Dimensions: 62”L x 32”W x 50”H 

General Info:

The AccuRate® series volumetric feeding systems are available for every feeding application. Their most outstanding properties are their economy and flexibility, as well as their ease of integration into existing production lines. With feed rates ranging from approximately 0.000017 to 280ft3/h (0.1/h to 8,000I/h), the feeding system can be used for continuous feeding, charging, and batching. It can process bulk solids with a particle size of up to 10 mm. Model 10 The AccuRate® Model 10 is easily disassembled for cleaning or for applications that require separate hoppers for different materials. The Tuf-Flex™ hopper in the Model 10 can be changed in less than two minutes without tools. Further advantages The AccuRate® Series volumetric feeders come equipped with easy to remove outside panels, stainless steel construction, lifetime lubricated bearings, double shaft seals to prevent powder leakage, gasketed covers, and vinyl hoppers that are agitated on the exterior for gentle product discharge. A large inlet prevents bridging and the rounded corners on the vinyl hopper help provide an uninterrupted flow.
PDF: https://www.schenckprocess.com/data/us/files/83/Catalog-81.-AccuRate-Volumetric-Series-Feeders.pdf

MJK0336 Reading Baking Solutions Clam Shell Continuous Mixer
1 Used Reading Baking Solutions Clam Shell Continuous Mixer 

MDL: 0x001-000-2013-7099
S/N: J115043-040
Dimensions: 6.5” opening at the top, 77”L of shell, 18” diameter,
Length of blades: 6.5”
Rectangular outlet: 13.25” x 9.5” 
VAC: 480
Hz: 60
Amps: 50
Phase: 3
Overall Dimensions: 120” L x 52” H

General Info: 

These continuous processors feature an optional clamshell barrel design that opens quickly and easily to access the paddles and screws for cleaning, inspection, and/or adjustments to the configuration. Opening automatically at the push of a button, the proprietary clamshell barrel design uses hydraulic power to raise the barrel and expose the interior, while also locking the barrel safely in place. The design eliminates the cranes, hoists, and other equipment needed to access the screws and paddles using traditional barrel designs along with their need for extra floor space as temporary barrel storage during cleaning and maintenance. Developed for food, plastics, chemical, pharmaceutical, and other processors, the clamshell design speeds the changeover process and promotes complete cleaning to virtually eliminate the potential for cross-contamination. The clamshell design is suitable for automatically mixing, compounding, reacting, crystallizing, encapsulating, preconditioning, and other processes that require multiple powdered, liquid, and viscous materials to be combined into a uniform, homogeneous product. The clamshell design is custom-engineered with the continuous processor for each installation to accommodate nearly any material including abrasives, corrosives, and materials requiring FDA, USDA, and/or 3A compliance. This Clam Shell Mixer was used in the process of creating protein chips 

MJK0337 Reading Baking Systems Rotary Presser/Sheeter
1 Used Reading Baking Systems Rotary Presser/Sheeter

MDL: SH202-048-2013-7102
S/N: J115043-070 
MFG: Reading Baking Systems
VAC: 480
Phase: 3
Hz: 60
Amps: 10
Dimensions: 132”L x 110”W x 102”H

General Info: 

The Thomas L. Green 2-Roll Sheeter creates a consistent dough sheet ready for dough forming or further reduction. Two powered stainless steel rolls rotate toward one another and draw raw dough into a single sheet with consistent characteristics and thickness. The stainless steel rolls are manufactured to precise tolerances of concentricity in order to maintain consistent dough sheet formation. Features:  Roll gap distance can be measured and monitored during production Separate direct drives for independent roll control Sheet thickness can be adjusted during production Easy access for maintenance and inspection Hopper level sensing for an accurate hopper fill.

MJK0338 Reading Baking Systems Rotary Cutter with extra dies
1 Used Reading Baking Systems Rotary Cutter With Extra Dies

MFG: Reading Baking Systems
Overall Dimensions: 172”L x 70”W x 78” Height
Conveyor Height: 46”H

General Info: 

The Rotary Cutting Station accurately and continuously cuts distinct product shapes out of a single dough sheet. An integrated conveyor system moves the product through - and is pressured against - a rotating die assembly. Operators can adjust the pressure on the dough sheet during operation to ensure a thorough cut and consistent piece production. Features:  May be designed with two or more die rolls for complex shape production or used independently for different products on the same line. An integrated scrap removal system may be mounted on the discharge end of the machine. Scrap dough can be discharged and re-routed to the dough handling system for reuse. The gap between the conveyor and die roll and the pressure exerted on the conveyor belt is adjustable. Dough sheet thickness is typically between .89mm (.035”) and 1.65mm (.065”) prior to cutting, but thicker sheets may be accommodated. Die rolls can be engraved bronze, coated metals, or plastic cups

Website: https://www.readingbakery.com/rotary-cutting-station-bakery-equipment.html 

MJK0339 Transfer Conveyor
1 Used Transfer Conveyor

Overall Dimensions: 140”L x 55”W x 46”H
Belt Width: 49”W

Location: El Monte, CA

Nutra, Pharma, and Packaging Equipment Multiple Location

Ends from

General delivery information available from the auctioneer

Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.

Important Information

AUCTION DATE: Lots start closing 7/2/24 10 am PST

LOCATION: Multiple Locations, California, Arizona, Texas

INSPECTION: Please contact us to schedule. 818-495-3038 

 

PICKUP/REMOVAL:  Final Loadout is July 30th, 2023. 

 

18% Buyers Premium applies on all online purchases.  

 

 

  

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Friday, 8:00 AM EST – 8:00 PM EST

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

 

 

 

 

Terms and Conditions

Terms of Sale Agreement:

SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS

  1. Only Credit Card, Wire Transfers or Cashier’s Checks payable to Chris Hillseth Enterprises (“CHE”) will be accepted for payment. No equipment will be removed from the sale site until payment is received by CHE. NO EXCEPTIONS! NO PAYMENT TAKEN ON SITE.
  2. CHE makes reasonable efforts to ensure that descriptions and other information are accurate. Bidders are strongly encouraged to verify any specifications and other information about equipment through consultation with independent experts or inspection by a qualified person. Any measurements provided, including shipping dimensions and weights, are approximate and/or estimated. Neither CHE nor the equipment owners make any warranties or guarantees. Under no circumstances will CHE or the seller be held responsible for any errors, omissions, discrepancies or inaccuracies. Everything is sold on an “AS IS/WHERE IS” basis with no warranties or representations whatsoever, either express or implied. WITHOUT LIMITING THE GENERALITY OF THE ABOVE, ANY AND ALL WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY OF GOODS ARE EXPRESSLY DISCLAIMED.
  3. For bidding approval, at its discretion, CHE may contact Bidders via email or telephone before to provide a deposit. Require a deposit of up to $10,000.00 USD (refundable without purchase) for lack of sufficient Bidspotter history e.g. first time Bidspotter registrant or negative Bidspotter history. Bidder will be notified if it is determined a deposit must be made. If CHE does not receive a response from its attempts to contact Buyer or if the Buyer does not provide a deposit, CHE reserves the right to refuse or cancel Buyer’s bids and re-sell Goods.
  4. Some items may have minimums or reserves. Therefore, bidder acknowledges they have been informed that Auctioneer may bid at the auction for its own account or on behalf of a third party or the seller.
  5. Purchaser hereby agrees to defend, indemnify and hold harmless auctioneer, Seller and their respective directors, officers, employees and other agents and representatives from and against any and all liabilities, judgments, claims, settlements, losses, damages, penalties, obligations and expenses, including attorney`s fees and expenses and other professional fees and expenses, incurred or suffered by such person arising from, by reason of, or in connection with any loss, damage or injury to person or property arising from, by reason of or in connection with the Goods sold hereunder. This indemnification shall survive delivery of the Goods to Purchaser and any subsequent sale or other transfer of the Goods to a third party.
  6. It is the buyers’ responsibility to secure all safety equipment to meet all applicable government safety standards in using or removing items purchased.
  7. Sales Tax will be added to the purchase of all taxable items. Dealers who purchase for resale must file their resale permit numbers. If sales tax is not collected at the time of sale and is deemed “needed to be paid” at a later date, buyer agrees to pay all required taxes.
  8. Purchaser does hereby indemnify and hold harmless auctioneer and seller from any and all damages, claims or liabilities from injuries to persons or property of any type whatsoever caused during the sale or by the removal of items purchased.
  9. Auctioneer and Seller shall have no liability to the purchaser due to non-delivery of any item for any reason other than to return to the Purchaser the monies deposited for non-delivered items.
  10. In the event the purchaser fails to pay the whole of the purchase within the time set forth by the auctioneers and/or fails to comply with any of the conditions or terms of sale, the seller may retain and/or recover the deposit specified as liquidated damages and, in addition thereto, items that are not paid for can be resold at public or private sale without further notice. Any deficiency resulting from such resale shall be paid to the auctioneers by the defaulting purchaser together with all charges, fees, and expenses incurred by such resale and enforcement of the obligation hereunder.
  11. The Bidder becomes solely responsible for all items purchased by him immediately following his winning bid at the auction. Therefore, he is advised to further guard and insure his items at his own discretion.
  12. No item can, on any account, be removed before buyer receives payment in full. Removal shall be at the expense, risk and liability of the purchaser. Auctioneers shall not be responsible for items not removed within the time allowed. If equipment is not removed within specified removal time, purchaser shall be liable for any moving and storage costs incurred and, if not so removed, the items shall be deemed abandoned.
  13. If any shortage exists on estimated counts, an adjustment will be made if claims are made at time of removal. No adjustment will be allowed after items are removed from the premises.
  14. If any dispute arises between two or more bidders, the sellers’ agent may or may not put the lot up again at once, and resell.
  15. The sellers’ agent, when acting as agent only, is not responsible for acts of its principals.
  16. A 18% Buyers premium will be applied to all sales in Addition to Applicable Local and State Sales Tax.
  17. By accepting a sale listing catalog and signing this form the buyer agrees to these terms and any announced terms at the sale.
  18. You will receive notifications from us regarding your purchases.
  19. Seller reserves the right to accept or reject any and all bids.
  20. All purchases of “regulated machines” will be reported pursuant to applicable Federal Regulations.
  21. All Bills must be completed on Day of Sale unless arrangements are made with Auction House prior to bidding.
  22. Full Payment at Termination of Sale.
  23. A 3% fee will be applied to all CC orders.
  24. Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates.

 

Inspection date (day only) is:  

By Appointment Only. Call 818 495 3038 to Schedule.

Inspection locations:

Various Locations, call for specific item.

Inspection by appointment only. 

Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com

See Full Terms And Conditions

Tags: Schenck, General, Processor, Thomas, Solid, Hopper, Sheeter, Conveyor, Inspection Hopper, Transfer conveyor, Conveyor Belt, Screw