237
Lot
237
Incap Dott Bonapace & C.
Model: In-cap
Sn: 256/05
Mfg: 2005
Volt: 110
Hz: 60
Bar: 6
Description: 3 Full sets of tooling capable of processing Powder, liquid, Pellets or Capsules
An alternative to the Tamping Powder System. It allows processing Powders unsuitable for the tamping process. This device increases the range of powders which the IN-CAP machine can process.
PELLETS FEEDER
It has been designed to fill Pellets. The capsule filling machine is suitable to set 3 different Pellets Feeders allowing to process 3 different Products at the same time.
A device designed for all Labs – R&D Depts – etc., which need to fill liquids into a capsule. It has a 2.3L Heated Hopper + an Adjustable Speed Stirrer.
The Filling Nozzle has been designed to fill from 0.15 mg up to 1000 mg.
TABLET/CAPSULE FILLER
A Special Device designed to Fill Tablets (also Mini) or Capsule-in-Capsule (CIC). It has been developed for special applications and it increases the range of possible combinations available.
https://www.dottbonapace.it/capsules/in-cap-capsule-filler-automatic/
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience. Location: Los Angeles, CA
Skidding:$ 650
Load Out:$ 475
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: Lots start closing 11/23/23 10 am PST
LOCATION: Multiple Locations
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: Final Loadout is December 12th , 2023.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
Incap Dott Bonapace & C.
Model: In-cap
Sn: 256/05
Mfg: 2005
Volt: 110
Hz: 60
Bar: 6
Description: 3 Full sets of tooling capable of processing Powder, liquid, Pellets or Capsules
An alternative to the Tamping Powder System. It allows processing Powders unsuitable for the tamping process. This device increases the range of powders which the IN-CAP machine can process.
PELLETS FEEDER
It has been designed to fill Pellets. The capsule filling machine is suitable to set 3 different Pellets Feeders allowing to process 3 different Products at the same time.
A device designed for all Labs – R&D Depts – etc., which need to fill liquids into a capsule. It has a 2.3L Heated Hopper + an Adjustable Speed Stirrer.
The Filling Nozzle has been designed to fill from 0.15 mg up to 1000 mg.
TABLET/CAPSULE FILLER
A Special Device designed to Fill Tablets (also Mini) or Capsule-in-Capsule (CIC). It has been developed for special applications and it increases the range of possible combinations available.
https://www.dottbonapace.it/capsules/in-cap-capsule-filler-automatic/
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience. Location: Los Angeles, CA
Skidding:$ 650
Load Out:$ 475
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: Lots start closing 11/23/23 10 am PST
LOCATION: Multiple Locations
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: Final Loadout is December 12th , 2023.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com