438
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
438
1- O I Analytical Aurora Model 1030
The Aurora 1030W TOC Analyzer uses the proven heated persulfate wet oxidation technique to analyze organic contamination levels in liquid samples. The instrument can be programmed and calibrated to analyze samples containing organic carbon at levels as low as 10 ppb and as high as 30,000 ppm. In addition to its wide range, the Aurora 1030W has an extremely high daily throughput. Up to 300 samples can be analyzed in a 24-hour period (dependent on method and application).
The reaction chamber of the Aurora 1030W is thoroughly rinsed between analyses to eliminate residue from the previous sample. This ensures the Aurora 1030W maintains the low system background necessary for high sensitivity TOC measurements. This contrasts with combustion TOC analyzers in which residual salts accumulate on catalyst surfaces, degrading oxidation efficiency and causing higher blanks and background contamination.
Wet Oxidation Mode
Operating PrincipleHeated sodium persulfate oxidation
Measurement Range10 ppb C - 30,000 ppm C (multiple calibration ranges or dilution required)
Instrument Detection LImit (IDL)2 ppb C
Sample Injection Volume10µL – 10mL
Method TCAcid and persulfate reaction
Method TICAcidification with Phosphoric acid and sparging
Method TOCNPOC by heated persulfate oxidation or TC - TIC
Reagents RequiredSodium persulfate, 5% phosphoric acid, rinsewater
Gas SupplyN2 (99.998%), zero-grade air, or O2 (99.998%)
General Instrument Specifications
Measurement TechniqueNon-dispersive infrared (NDIR) detector
Operator InterfaceColor LCD touchscreen display with Windows® CE-based software
Basic SoftwareSingle instrument operation with data transfer to PC
Optional ATOC SoftwareNetwork LAN/LIMS operation, data management, custom reports, 21 CFR 11 compliance
Autosampler88 position rotary autosampler designed to fit directly underneath Aurora 1030D analyzer
CertificationCE, EMC: EN61326 / Safety: IEC 61010-11 2001
Power SupplyVariable voltage, 100-240VAC, 50/60Hz, 950W
Dimensions – Aurora 1030D + 1088 Autosampler26.75 in. H x 19.5 in. W x 23 in. D.
Skidding and Load Out Charges: Loading and skidding charges will be added to your purchase at market rates for your convenience.
Location: Forth Worth, TX
Skidding: $TBD
Loadout: $100
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: Lots start closing 10/31/23 10 am PST
LOCATION: Multiple Locations
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: Final Loadout is November 22nd , 2023.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1- O I Analytical Aurora Model 1030
The Aurora 1030W TOC Analyzer uses the proven heated persulfate wet oxidation technique to analyze organic contamination levels in liquid samples. The instrument can be programmed and calibrated to analyze samples containing organic carbon at levels as low as 10 ppb and as high as 30,000 ppm. In addition to its wide range, the Aurora 1030W has an extremely high daily throughput. Up to 300 samples can be analyzed in a 24-hour period (dependent on method and application).
The reaction chamber of the Aurora 1030W is thoroughly rinsed between analyses to eliminate residue from the previous sample. This ensures the Aurora 1030W maintains the low system background necessary for high sensitivity TOC measurements. This contrasts with combustion TOC analyzers in which residual salts accumulate on catalyst surfaces, degrading oxidation efficiency and causing higher blanks and background contamination.
Wet Oxidation Mode
Operating PrincipleHeated sodium persulfate oxidation
Measurement Range10 ppb C - 30,000 ppm C (multiple calibration ranges or dilution required)
Instrument Detection LImit (IDL)2 ppb C
Sample Injection Volume10µL – 10mL
Method TCAcid and persulfate reaction
Method TICAcidification with Phosphoric acid and sparging
Method TOCNPOC by heated persulfate oxidation or TC - TIC
Reagents RequiredSodium persulfate, 5% phosphoric acid, rinsewater
Gas SupplyN2 (99.998%), zero-grade air, or O2 (99.998%)
General Instrument Specifications
Measurement TechniqueNon-dispersive infrared (NDIR) detector
Operator InterfaceColor LCD touchscreen display with Windows® CE-based software
Basic SoftwareSingle instrument operation with data transfer to PC
Optional ATOC SoftwareNetwork LAN/LIMS operation, data management, custom reports, 21 CFR 11 compliance
Autosampler88 position rotary autosampler designed to fit directly underneath Aurora 1030D analyzer
CertificationCE, EMC: EN61326 / Safety: IEC 61010-11 2001
Power SupplyVariable voltage, 100-240VAC, 50/60Hz, 950W
Dimensions – Aurora 1030D + 1088 Autosampler26.75 in. H x 19.5 in. W x 23 in. D.
Skidding and Load Out Charges: Loading and skidding charges will be added to your purchase at market rates for your convenience.
Location: Forth Worth, TX
Skidding: $TBD
Loadout: $100
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: Lots start closing 10/31/23 10 am PST
LOCATION: Multiple Locations
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: Final Loadout is November 22nd , 2023.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com