299
Lot
299
W00WONMIX ULTRA HOMO MIXER 15000L X 2
COSMAX USA SYSTEM
Vacuum Mixing and Homogenizing System 15000L 2
Premix vessel Support Kettle 8000L – Gum Mixer 8000kg 2
Premix vessel Support Kettle 8000L - Paddle Mixer 8000kg 2
Temperature control system Direct Steam 2
Vacuum system 2
Electrical control system 2
Operator Mezzanine w Elevator 1
All vessels are 316L contact parts
All pumps, controls, meters, piping as shown onsite.
Intended use of the system is to produce flow capable liquid cosmetic products such as
emulsions and suspensions.
Liquid/Liquid dispersions: emulsions
Liquid / Solid dispersions: suspensions with a continuous Liquid phase.
At Solon Ohio https://www.youtube.com/shorts/QXwtEsxwHCg
https://woowon.co.kr/eng/
https://www.youtube.com/@woowonmix5076/videos
Main Kettle x 2
Kettle Number
Serial Number
UHM-P-C00419-00000-20-
02
Kettle Size 15,000 L
Kettle Diameter Φ2700x3400H mm
Minimum Outer Sweep Speed 2 RPM
Maximum Outer Sweep Speed 20 RPM
Minimum Inner Sweep Speed 4 RPM
Maximum Inner Sweep Speed 43 RPM
Minimum Homogenizer Speed 200 RPM
Maximum Homogenizer Speed 1750 RPM
Minimum Volume to run homo at max speed L/min
Heating Media (Steam / Liquid) Steam
Cooing Media (Chilled / City Water)
Both Okay. It is up to site
condition, But as I know
you are using chiller now,
so we are using it.
Controlled Cooling (i.e. ramp cooling)
Maxium Pressure Jacket 2.2kg, Inner N/A psig
Maximum Vacuum -760 mbar
Minimum Volume to Cover Temperature Probe 150 L
Number of Induction Ports
4EA, 2" - TOP / 1EA, 3" -
BOTTOM
Liquid Induction Capability (Y/N) Y
Powder Induction Capability (Y/N) Y
Location of Additional Inductions (Top, Recycle Loop,
Homogenizer, etc)
4EA, 2" - TOP / 1EA, 3" -
BOTTOM
Induction Type (Auto/Manual)
Manual - TOP / AUTO -
BOTTOM
Minimum Transfer Rate
1 (Depending on control
the manual valve) L/min
Maximum Transfer Rate
about 100~150 (Depending
on product viscosity,
density) L/min
Support Kettle(Paddle Mixer)
Kettle Number
Serial Number AGI-P-C00419-00000-20-03
Kettle Size 8000 L
Kettle Diameter Φ2100x2870H mm
Minimum Outer Sweep Speed N/A RPM
Maximum Outer Sweep Speed N/A RPM
Minimum Inner Sweep Speed 5 RPM
Maximum Inner Sweep Speed 58 RPM
Minimum Homogenizer Speed N/A RPM
Maximum Homogenizer Speed N/A RPM
Minimum Volume to run homo at max speed N/A L
Heating Media (Steam / Liquid) Steam
Cooing Media (Chilled / City Water) N/A
Controlled Cooling (i.e. ramp cooling)
Maxium Pressure Jacket 2.2kg, Inner N/A psig
Maxium Vacuum N/A mbar
Minimum Volume to Cover Temperature Probe 120 L
Number of Induction Ports 1EA, 2" - TOP
Liquid Induction Capability (Y/N) Y
Powder Induction Capability (Y/N) N
Location of Additional Inductions (Top, Recycle Loop,
Homogenizer, etc) 1EA, 2" - TOP
Induction Type (Auto/Manual) Manual
Support Kettle(Paddle Mixer)
Kettle Number
Serial Number AGI-P-C00419-00000-20-03
Kettle Size 8000 L
Kettle Diameter Φ2100x2870H mm
Minimum Outer Sweep Speed N/A RPM
Maximum Outer Sweep Speed N/A RPM
Minimum Inner Sweep Speed 5 RPM
Maximum Inner Sweep Speed 58 RPM
Minimum Homogenizer Speed N/A RPM
Maximum Homogenizer Speed N/A RPM
Minimum Volume to run homo at max speed N/A L
Heating Media (Steam / Liquid) Steam
Cooing Media (Chilled / City Water) N/A
Controlled Cooling (i.e. ramp cooling)
Maxium Pressure Jacket 2.2kg, Inner N/A psig
Maxium Vacuum N/A mbar
Minimum Volume to Cover Temperature Probe 120 L
Number of Induction Ports 1EA, 2" - TOP
Liquid Induction Capability (Y/N) Y
Powder Induction Capability (Y/N) N
Location of Additional Inductions (Top, Recycle Loop,
Homogenizer, etc) 1EA, 2" - TOP
Induction Type (Auto/Manual) Manual
Support Kettle (Gum Mixer) x 2
Kettle Number
Serial Number AGI-P-C00419-00000-20-04
Kettle Size 8000 L
Kettle Diameter Φ2100x2870H mm
Minimum Outer Sweep Speed N/A RPM
Maximum Outer Sweep Speed N/A RPM
Minimum Inner Sweep Speed 300 RPM
Maximum Inner Sweep Speed 1750 RPM
Minimum Homogenizer Speed N/A RPM
Maximum Homogenizer Speed N/A RPM
Minimum Volume to run homo at max speed N/A L
Heating Media (Steam / Liquid) Steam
Cooing Media (Chilled / City Water) N/A
Controlled Cooling (i.e. ramp cooling)
Maxium Pressure Jacket 2.2kg, Inner N/A psig
Maxium Vacuum N/A mbar
Minimum Volume to Cover Temperature Probe 120 L
Number of Induction Ports 1EA, 2" - TOP
Liquid Induction Capability (Y/N) Y
Powder Induction Capability (Y/N) N
Location of Additional Inductions (Top, Recycle Loop,
Homogenizer, etc) 1EA, 2" - TOP
Induction Type (Auto/Manual) Manual
Skidding and Load out charges: Loading and skidding charges will be added to your purchase at market rates for your convenience.
Location: Solon, Ohio
Skidding:$TBD
Loadout:$227,500
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: Lots start closing 9/19//23 10 am PST
LOCATION: Solon, Ohio
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: Final Loadout is October 27th, 2023.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
W00WONMIX ULTRA HOMO MIXER 15000L X 2
COSMAX USA SYSTEM
Vacuum Mixing and Homogenizing System 15000L 2
Premix vessel Support Kettle 8000L – Gum Mixer 8000kg 2
Premix vessel Support Kettle 8000L - Paddle Mixer 8000kg 2
Temperature control system Direct Steam 2
Vacuum system 2
Electrical control system 2
Operator Mezzanine w Elevator 1
All vessels are 316L contact parts
All pumps, controls, meters, piping as shown onsite.
Intended use of the system is to produce flow capable liquid cosmetic products such as
emulsions and suspensions.
Liquid/Liquid dispersions: emulsions
Liquid / Solid dispersions: suspensions with a continuous Liquid phase.
At Solon Ohio https://www.youtube.com/shorts/QXwtEsxwHCg
https://woowon.co.kr/eng/
https://www.youtube.com/@woowonmix5076/videos
Main Kettle x 2
Kettle Number
Serial Number
UHM-P-C00419-00000-20-
02
Kettle Size 15,000 L
Kettle Diameter Φ2700x3400H mm
Minimum Outer Sweep Speed 2 RPM
Maximum Outer Sweep Speed 20 RPM
Minimum Inner Sweep Speed 4 RPM
Maximum Inner Sweep Speed 43 RPM
Minimum Homogenizer Speed 200 RPM
Maximum Homogenizer Speed 1750 RPM
Minimum Volume to run homo at max speed L/min
Heating Media (Steam / Liquid) Steam
Cooing Media (Chilled / City Water)
Both Okay. It is up to site
condition, But as I know
you are using chiller now,
so we are using it.
Controlled Cooling (i.e. ramp cooling)
Maxium Pressure Jacket 2.2kg, Inner N/A psig
Maximum Vacuum -760 mbar
Minimum Volume to Cover Temperature Probe 150 L
Number of Induction Ports
4EA, 2" - TOP / 1EA, 3" -
BOTTOM
Liquid Induction Capability (Y/N) Y
Powder Induction Capability (Y/N) Y
Location of Additional Inductions (Top, Recycle Loop,
Homogenizer, etc)
4EA, 2" - TOP / 1EA, 3" -
BOTTOM
Induction Type (Auto/Manual)
Manual - TOP / AUTO -
BOTTOM
Minimum Transfer Rate
1 (Depending on control
the manual valve) L/min
Maximum Transfer Rate
about 100~150 (Depending
on product viscosity,
density) L/min
Support Kettle(Paddle Mixer)
Kettle Number
Serial Number AGI-P-C00419-00000-20-03
Kettle Size 8000 L
Kettle Diameter Φ2100x2870H mm
Minimum Outer Sweep Speed N/A RPM
Maximum Outer Sweep Speed N/A RPM
Minimum Inner Sweep Speed 5 RPM
Maximum Inner Sweep Speed 58 RPM
Minimum Homogenizer Speed N/A RPM
Maximum Homogenizer Speed N/A RPM
Minimum Volume to run homo at max speed N/A L
Heating Media (Steam / Liquid) Steam
Cooing Media (Chilled / City Water) N/A
Controlled Cooling (i.e. ramp cooling)
Maxium Pressure Jacket 2.2kg, Inner N/A psig
Maxium Vacuum N/A mbar
Minimum Volume to Cover Temperature Probe 120 L
Number of Induction Ports 1EA, 2" - TOP
Liquid Induction Capability (Y/N) Y
Powder Induction Capability (Y/N) N
Location of Additional Inductions (Top, Recycle Loop,
Homogenizer, etc) 1EA, 2" - TOP
Induction Type (Auto/Manual) Manual
Support Kettle(Paddle Mixer)
Kettle Number
Serial Number AGI-P-C00419-00000-20-03
Kettle Size 8000 L
Kettle Diameter Φ2100x2870H mm
Minimum Outer Sweep Speed N/A RPM
Maximum Outer Sweep Speed N/A RPM
Minimum Inner Sweep Speed 5 RPM
Maximum Inner Sweep Speed 58 RPM
Minimum Homogenizer Speed N/A RPM
Maximum Homogenizer Speed N/A RPM
Minimum Volume to run homo at max speed N/A L
Heating Media (Steam / Liquid) Steam
Cooing Media (Chilled / City Water) N/A
Controlled Cooling (i.e. ramp cooling)
Maxium Pressure Jacket 2.2kg, Inner N/A psig
Maxium Vacuum N/A mbar
Minimum Volume to Cover Temperature Probe 120 L
Number of Induction Ports 1EA, 2" - TOP
Liquid Induction Capability (Y/N) Y
Powder Induction Capability (Y/N) N
Location of Additional Inductions (Top, Recycle Loop,
Homogenizer, etc) 1EA, 2" - TOP
Induction Type (Auto/Manual) Manual
Support Kettle (Gum Mixer) x 2
Kettle Number
Serial Number AGI-P-C00419-00000-20-04
Kettle Size 8000 L
Kettle Diameter Φ2100x2870H mm
Minimum Outer Sweep Speed N/A RPM
Maximum Outer Sweep Speed N/A RPM
Minimum Inner Sweep Speed 300 RPM
Maximum Inner Sweep Speed 1750 RPM
Minimum Homogenizer Speed N/A RPM
Maximum Homogenizer Speed N/A RPM
Minimum Volume to run homo at max speed N/A L
Heating Media (Steam / Liquid) Steam
Cooing Media (Chilled / City Water) N/A
Controlled Cooling (i.e. ramp cooling)
Maxium Pressure Jacket 2.2kg, Inner N/A psig
Maxium Vacuum N/A mbar
Minimum Volume to Cover Temperature Probe 120 L
Number of Induction Ports 1EA, 2" - TOP
Liquid Induction Capability (Y/N) Y
Powder Induction Capability (Y/N) N
Location of Additional Inductions (Top, Recycle Loop,
Homogenizer, etc) 1EA, 2" - TOP
Induction Type (Auto/Manual) Manual
Skidding and Load out charges: Loading and skidding charges will be added to your purchase at market rates for your convenience.
Location: Solon, Ohio
Skidding:$TBD
Loadout:$227,500
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: Lots start closing 9/19//23 10 am PST
LOCATION: Solon, Ohio
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: Final Loadout is October 27th, 2023.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com