111
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
111
1- Used Anchor Hocking P Linear Capper Series 4-RH
Anchor Hocking, AHP Series 4-RH, Automatic, steam flow, lug capper with number of containers per minute – depending on materials and application Cap size range: 27mm to 110mm. Container OD size range: 1-1/2" to 6-5/8". Both cap and jar size ranges per application with proper change parts. Equipped with 132" long x 4-1/2" wide Delran stainless steel container conveyor with no-container / no-cap senser, 36" long x 16" deep cap hopper magnetic star, cap selector and adjustable cap chute with cap detector and 7" wide x 4-1/2" high aperture x 60" long steam cap closure chamber has 75 lbs per square inch dry steam requirements, 3/4 gallon per minute at 50 psi water requirements, with container stabilizing side belts. Control panel has speed, exhaust and hopper control switches with start, stop / reset / e-stop push buttons. Mounted on heavy duty frame with height adjustable leveling legs.
Operation:
Bottles or containers are stabilized through the capping machine by using side belts, simultaneously dual belts apply significant down pressure on the cap, these belts travel at different rates which is what actually applies torque to the lug cap from introduction of the cap to the discharge of the capped product, tunnel is consistently flooded with steam. upon discharge this steam condenses which pulls a vacuum in the head space of the container.
, AHP Series 4-RH, Automatic, steam flow, lug capper with number of containers per minute – depending on materials and application Cap size range: 27mm to 110mm. Container OD size range: 1-1/2" to 6-5/8". Both cap and jar size ranges per application with proper change parts. Equipped with 132" long x 4-1/2" wide Delran stainless steel container conveyor with no-container / no-cap senser, 36" long x 16" deep cap hopper magnetic star, cap selector and adjustable cap chute with cap detector and 7" wide x 4-1/2" high aperture x 60" long steam cap closure chamber has 75 lbs per square inch dry steam requirements, 3/4 gallon per minute at 50 psi water requirements, with container stabilizing side belts. Control panel has speed, exhaust and hopper control switches with start, stop / reset / e-stop push buttons. Mounted on heavy duty frame with height adjustable leveling legs.
Operation:
Bottles or containers are stabilized through the capping machine by using side belts, simultaneously dual belts apply significant down pressure on the cap, these belts travel at different rates which is what actually applies torque to the lug cap from introduction of the cap to the discharge of the capped product, tunnel is consistently flooded with steam. upon discharge this steam condenses which pulls a vacuum in the head space of the container.
Series: 4RH
Serial Number: 104R
Volts: 460
Phase: 3
38MM Lugg Cap. Linear
Overall Dimensions of machine: 4' x 8' x 9'
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Commerce, California
Skidding:
Loadout:
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: lots start closing on Thursday, May 12th, 2022 at 10:00 am PT
LOCATION: ***Mutliple Locations*** In Southern California.
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1- Used Anchor Hocking P Linear Capper Series 4-RH
Anchor Hocking, AHP Series 4-RH, Automatic, steam flow, lug capper with number of containers per minute – depending on materials and application Cap size range: 27mm to 110mm. Container OD size range: 1-1/2" to 6-5/8". Both cap and jar size ranges per application with proper change parts. Equipped with 132" long x 4-1/2" wide Delran stainless steel container conveyor with no-container / no-cap senser, 36" long x 16" deep cap hopper magnetic star, cap selector and adjustable cap chute with cap detector and 7" wide x 4-1/2" high aperture x 60" long steam cap closure chamber has 75 lbs per square inch dry steam requirements, 3/4 gallon per minute at 50 psi water requirements, with container stabilizing side belts. Control panel has speed, exhaust and hopper control switches with start, stop / reset / e-stop push buttons. Mounted on heavy duty frame with height adjustable leveling legs.
Operation:
Bottles or containers are stabilized through the capping machine by using side belts, simultaneously dual belts apply significant down pressure on the cap, these belts travel at different rates which is what actually applies torque to the lug cap from introduction of the cap to the discharge of the capped product, tunnel is consistently flooded with steam. upon discharge this steam condenses which pulls a vacuum in the head space of the container.
, AHP Series 4-RH, Automatic, steam flow, lug capper with number of containers per minute – depending on materials and application Cap size range: 27mm to 110mm. Container OD size range: 1-1/2" to 6-5/8". Both cap and jar size ranges per application with proper change parts. Equipped with 132" long x 4-1/2" wide Delran stainless steel container conveyor with no-container / no-cap senser, 36" long x 16" deep cap hopper magnetic star, cap selector and adjustable cap chute with cap detector and 7" wide x 4-1/2" high aperture x 60" long steam cap closure chamber has 75 lbs per square inch dry steam requirements, 3/4 gallon per minute at 50 psi water requirements, with container stabilizing side belts. Control panel has speed, exhaust and hopper control switches with start, stop / reset / e-stop push buttons. Mounted on heavy duty frame with height adjustable leveling legs.
Operation:
Bottles or containers are stabilized through the capping machine by using side belts, simultaneously dual belts apply significant down pressure on the cap, these belts travel at different rates which is what actually applies torque to the lug cap from introduction of the cap to the discharge of the capped product, tunnel is consistently flooded with steam. upon discharge this steam condenses which pulls a vacuum in the head space of the container.
Series: 4RH
Serial Number: 104R
Volts: 460
Phase: 3
38MM Lugg Cap. Linear
Overall Dimensions of machine: 4' x 8' x 9'
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Commerce, California
Skidding:
Loadout:
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: lots start closing on Thursday, May 12th, 2022 at 10:00 am PT
LOCATION: ***Mutliple Locations*** In Southern California.
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com