120
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
120
1 - Used R. A. Jones PK-4000 Pouch / Sachet Filling Machine with CTC Splicer and Knife Cutoff Station
Speed: 4000-5000 Inches per min, 1600 Pouches per min at 3" cutoff at 5000
Materials: 1.5 to 5 mil, including retortable and oriented poly propylene
Size Range: Width and Length can be changed depending on the tucking mechanism of the machine
Model: PK-4000
Serial Number: S5301
Volts: 240
Hz: 60
Phase: 3
1 - Used EV 037 Eccentric Lap Slicer / Crimper Machine with Pick in Place
Model: HD-ALRS-900M
Serial Number:
Volts: 115
Hz: 50/60
Phase: 0
Amps: 9
Pressure: 80PSI
Quality: Clean Nonlubricated. Dry to dew point of 40 degrees.
This machine is tooled and set to run a packet that is 5’’Length x 3''1/4'' Wide
CTC Splicer
The CTC splicer unit dispenses web material to create the pouches, and features automatic splicing to provide a continuous supply of web stock.
Edge Guide System
The web passes between the edge of the guide sensors which monitor the position of the web. The correction roller swivels to keep the web aligned with the plow.
Plow
The web is horizontally over the Plow, forming a lengthwise fold near the centerline of the web. The web is folded slight off- center to leave a small “lip” used to open pouches. The folded web is vertical as it leaves the Plow and passes between the Former Blades to complete the fold. The Web then Passes through the creasing roller assembly where the fold is creased into the web.
Vertical Sealer
The web wraps around the Vertical Sealer unit that forms the vertical pouch seals. While moving around the sealer, the web rides on heated “lands” that fuse the sealant lining of the web. The web between the lands receives no direct heat and does not seal. A pressure roller lightly presses the web against the lands jut before the web leaves the Vertical Sealer to aid seal formation.
Tear Notcher
As the web is pulled between the Tear Notcher and its back-up roller, a notch is created in the top edge of the web. The phasing of the Tear Notcher can be adjusted. To allow placement of the notch anywhere along the web’s top edge.
Tucking Rollers
The three Tucking Rollers guide the web onto the vacuum lands of the filler wheel. The rollers are arranged so that the web winds through them in an S-shaped path to maintain proper tension.
Top Sealer
The pouches cloys as the web is pulled from the Filler Wheel. As the web of closed pouches passes through the Top Sealer, the top seal area is heated by hot air to seal the pouches.
Second Feed Rollers
The Second Feed Rollers, located just downstream from the top sealer, pull the web from the filler wheel and compress the top seal.
Knife and Transfer Section
The Knife operates independently from the rest of the Pouch King to receive pouches that are completely formed, filled, and sealed but still strung together. The Knife cuts the pouches apart and passes them to the Transfer.
General Info:
R.A Jones created and patented the Pouch King® , a high performance pouch-filling machine more than 30 years ago. This improved, high-end system employs printed circuit heating technology, which provides a precise temperature profile across the vertical seal bars of the machinery, making a virtually flawless laminated seal. The Pouch King® has a wide range of feeding systems for both individual and multi-component blends, enabling the customer to have optimal filling and accuracy control. After filling the pouches, R.A Jones has a variety of transfers available, from multi-lane discharge to fully automated cartoning. The Pouch King® can run over 4000 linear inch minutes in standard format and over 7000 linear inches of web per minute for ultra high speed applications.
Pouch Size Range:
Linear Speed - Over 7,000 linear inches per minute
Pouch Width - 2” (51 mm) to 8” (203 mm)
Pouch Height - 2” (51 mm) to 7.5” (190 mm)
Optional Height Range - Up to 10” (254 mm)
General Info:
R.A Jones created and patented the Pouch King® , a high performance pouch-filling machine more than 30 years ago. This improved, high-end system employs printed circuit heating technology, which provides a precise temperature profile across the vertical seal bars of the machinery, making a virtually flawless laminated seal. The Pouch King® has a wide range of feeding systems for both individual and multi-component blends, enabling the customer to have optimal filling and accuracy control. After filling the pouches, R.A Jones has a variety of transfers available, from multi-lane discharge to fully automated cartoning. The Pouch King® can run over 4000 linear inch minutes in standard format and over 7000 linear inches of web per minute for ultra high speed applications
Pouch Size Range:
Linear Speed - Over 7,000 linear inches per minute
Pouch Width - 2” (51 mm) to 8” (203 mm)
Pouch Height - 2” (51 mm) to 7.5” (190 mm)
Optional Height Range - Up to 10” (254 mm)
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Torrance, CA
Load Out:
Skidding:
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: lots start closing on Thursday, May 12th, 2022 at 10:00 am PT
LOCATION: ***Mutliple Locations*** In Southern California.
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1 - Used R. A. Jones PK-4000 Pouch / Sachet Filling Machine with CTC Splicer and Knife Cutoff Station
Speed: 4000-5000 Inches per min, 1600 Pouches per min at 3" cutoff at 5000
Materials: 1.5 to 5 mil, including retortable and oriented poly propylene
Size Range: Width and Length can be changed depending on the tucking mechanism of the machine
Model: PK-4000
Serial Number: S5301
Volts: 240
Hz: 60
Phase: 3
1 - Used EV 037 Eccentric Lap Slicer / Crimper Machine with Pick in Place
Model: HD-ALRS-900M
Serial Number:
Volts: 115
Hz: 50/60
Phase: 0
Amps: 9
Pressure: 80PSI
Quality: Clean Nonlubricated. Dry to dew point of 40 degrees.
This machine is tooled and set to run a packet that is 5’’Length x 3''1/4'' Wide
CTC Splicer
The CTC splicer unit dispenses web material to create the pouches, and features automatic splicing to provide a continuous supply of web stock.
Edge Guide System
The web passes between the edge of the guide sensors which monitor the position of the web. The correction roller swivels to keep the web aligned with the plow.
Plow
The web is horizontally over the Plow, forming a lengthwise fold near the centerline of the web. The web is folded slight off- center to leave a small “lip” used to open pouches. The folded web is vertical as it leaves the Plow and passes between the Former Blades to complete the fold. The Web then Passes through the creasing roller assembly where the fold is creased into the web.
Vertical Sealer
The web wraps around the Vertical Sealer unit that forms the vertical pouch seals. While moving around the sealer, the web rides on heated “lands” that fuse the sealant lining of the web. The web between the lands receives no direct heat and does not seal. A pressure roller lightly presses the web against the lands jut before the web leaves the Vertical Sealer to aid seal formation.
Tear Notcher
As the web is pulled between the Tear Notcher and its back-up roller, a notch is created in the top edge of the web. The phasing of the Tear Notcher can be adjusted. To allow placement of the notch anywhere along the web’s top edge.
Tucking Rollers
The three Tucking Rollers guide the web onto the vacuum lands of the filler wheel. The rollers are arranged so that the web winds through them in an S-shaped path to maintain proper tension.
Top Sealer
The pouches cloys as the web is pulled from the Filler Wheel. As the web of closed pouches passes through the Top Sealer, the top seal area is heated by hot air to seal the pouches.
Second Feed Rollers
The Second Feed Rollers, located just downstream from the top sealer, pull the web from the filler wheel and compress the top seal.
Knife and Transfer Section
The Knife operates independently from the rest of the Pouch King to receive pouches that are completely formed, filled, and sealed but still strung together. The Knife cuts the pouches apart and passes them to the Transfer.
General Info:
R.A Jones created and patented the Pouch King® , a high performance pouch-filling machine more than 30 years ago. This improved, high-end system employs printed circuit heating technology, which provides a precise temperature profile across the vertical seal bars of the machinery, making a virtually flawless laminated seal. The Pouch King® has a wide range of feeding systems for both individual and multi-component blends, enabling the customer to have optimal filling and accuracy control. After filling the pouches, R.A Jones has a variety of transfers available, from multi-lane discharge to fully automated cartoning. The Pouch King® can run over 4000 linear inch minutes in standard format and over 7000 linear inches of web per minute for ultra high speed applications.
Pouch Size Range:
Linear Speed - Over 7,000 linear inches per minute
Pouch Width - 2” (51 mm) to 8” (203 mm)
Pouch Height - 2” (51 mm) to 7.5” (190 mm)
Optional Height Range - Up to 10” (254 mm)
General Info:
R.A Jones created and patented the Pouch King® , a high performance pouch-filling machine more than 30 years ago. This improved, high-end system employs printed circuit heating technology, which provides a precise temperature profile across the vertical seal bars of the machinery, making a virtually flawless laminated seal. The Pouch King® has a wide range of feeding systems for both individual and multi-component blends, enabling the customer to have optimal filling and accuracy control. After filling the pouches, R.A Jones has a variety of transfers available, from multi-lane discharge to fully automated cartoning. The Pouch King® can run over 4000 linear inch minutes in standard format and over 7000 linear inches of web per minute for ultra high speed applications
Pouch Size Range:
Linear Speed - Over 7,000 linear inches per minute
Pouch Width - 2” (51 mm) to 8” (203 mm)
Pouch Height - 2” (51 mm) to 7.5” (190 mm)
Optional Height Range - Up to 10” (254 mm)
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Torrance, CA
Load Out:
Skidding:
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
AUCTION DATE: lots start closing on Thursday, May 12th, 2022 at 10:00 am PT
LOCATION: ***Mutliple Locations*** In Southern California.
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com