71
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
71
1-Used All-Fill Dual Head Powder Filler Model DHA 600
Model: DHA-sv- 600
Serial:95296
MFG:2013
Electrical Requirements Fill Motor Input: 208/230/460V; 3-Phase; 60HZ. Standard Controls: 115V 50-60 HZ. Other ratings available upon request.
Pneumatic Requirements 4 SCFM @ 60 PSI
All-Fill’s Model DHA automatic auger filler is a complete, economical solution to your filling production requirements. It consists of the industry-proven All Fill filling heads, conveyor mounted on a sturdy frame, and container indexing controls that reliably move and position for filling. This auger filler also includes an Allen Bradley PLC control system with a touchscreen that provides precise selection and adjustment of fill amounts and machine functioning. Providing easy setup, operation, and monitoring of the filling operation.
Construction Painted aluminum base. Anodized aluminum. Stainless steel contact parts. Sturdy tubular steel frame to support filling head and conveyor. Includes mechanical jack to raise/lower fill head. Aluminum head castings with one-piece stainless steel covers. Heavy-duty clutch-brakes or servo direct drives.
Production Rates Speeds ranging up to 180 CPM, application dependent
Control Features 7" color touchscreen HMI. A speed adjustable belt drive and continuously-operating fill motor provides the torque and high cycle rates necessary for production filling. Product level control. Slow speed agitation. Motor starters and transformer. Adjustable frequency vibration to settle product in container. Accepts standard All-Fill accessories. In line All-Fill Checkweigher with feedback to filling heads for instantaneous adjustment of filled amounts. Adjustable guide rails. Variable speed.
Storage 100 product memory
Hopper Capacity 16 gal. hoppers with dustproof cover and 6" infeed duct
Conveyor Standard 10 ft. stainless steel conveyor channel with dual-strand stainless steel block conveyor chain or plastic tabletop conveyor. Adjustable guide rails and variable speed conveyor drive. Pneumatic container indexing with round end, cone point, wedge stop, or pressure stop adjustable indexing pins, additional lengths are available
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Texas
Skidding:$575
Load Out:$480
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
***Assets are located at multiple locations.***
AUCTION DATE: lots start closing on Tuesday, January 18th at 10:00 am PT
LOCATION: **Note** Assets located at multiple locations. PLEASE READ THE DESCRIPTIONS!
1310 Mountain View Circle, Azusa, California
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1-Used All-Fill Dual Head Powder Filler Model DHA 600
Model: DHA-sv- 600
Serial:95296
MFG:2013
Electrical Requirements Fill Motor Input: 208/230/460V; 3-Phase; 60HZ. Standard Controls: 115V 50-60 HZ. Other ratings available upon request.
Pneumatic Requirements 4 SCFM @ 60 PSI
All-Fill’s Model DHA automatic auger filler is a complete, economical solution to your filling production requirements. It consists of the industry-proven All Fill filling heads, conveyor mounted on a sturdy frame, and container indexing controls that reliably move and position for filling. This auger filler also includes an Allen Bradley PLC control system with a touchscreen that provides precise selection and adjustment of fill amounts and machine functioning. Providing easy setup, operation, and monitoring of the filling operation.
Construction Painted aluminum base. Anodized aluminum. Stainless steel contact parts. Sturdy tubular steel frame to support filling head and conveyor. Includes mechanical jack to raise/lower fill head. Aluminum head castings with one-piece stainless steel covers. Heavy-duty clutch-brakes or servo direct drives.
Production Rates Speeds ranging up to 180 CPM, application dependent
Control Features 7" color touchscreen HMI. A speed adjustable belt drive and continuously-operating fill motor provides the torque and high cycle rates necessary for production filling. Product level control. Slow speed agitation. Motor starters and transformer. Adjustable frequency vibration to settle product in container. Accepts standard All-Fill accessories. In line All-Fill Checkweigher with feedback to filling heads for instantaneous adjustment of filled amounts. Adjustable guide rails. Variable speed.
Storage 100 product memory
Hopper Capacity 16 gal. hoppers with dustproof cover and 6" infeed duct
Conveyor Standard 10 ft. stainless steel conveyor channel with dual-strand stainless steel block conveyor chain or plastic tabletop conveyor. Adjustable guide rails and variable speed conveyor drive. Pneumatic container indexing with round end, cone point, wedge stop, or pressure stop adjustable indexing pins, additional lengths are available
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Texas
Skidding:$575
Load Out:$480
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
***Assets are located at multiple locations.***
AUCTION DATE: lots start closing on Tuesday, January 18th at 10:00 am PT
LOCATION: **Note** Assets located at multiple locations. PLEASE READ THE DESCRIPTIONS!
1310 Mountain View Circle, Azusa, California
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com