65
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
65
1-Used All-Fill Powder Elevator Model: ISC
Serial Number: 300689C
Mode: ISC
MFG:2013
Electrical Requirements: 208/230/460v, 3-phase, 60 HZ.
Construction: Stainless steel contact parts
Even the most accurate of fillers can only operate with a reliable, regulated, consistent supply of product to the hopper. All-Fill complements its auger filling machines with a complete line of efficient, reliable delivery systems for free-flowing powders, non flowing products, and bulk solids. All-Fill offers both horizontal and inclined screwfeeder equipment for the bulk supply of product to your filling equipment. Model ISC can be used to refill filling machine hoppers and can also be useful in transferring product from different height levels
Auger screw conveyor dimensions: 5" diameter X 10' Length
Construction: Stainless Steel Frame – Welded and polished type-304 stainless steel product contact parts, Mounting frame with adjustable feet and
removable hopper cover
Sizes: 5.5” dia. X 10’ long ground and polished stainless steel screw with matching, pivoting housing, Adjustable discharge height, standard 74"
Features:
Includes ¼ hp, 1400 rpm drive and controls, 6 cu. ft. hopper with hinged cover, safety limit switches on hopper covers, delivery speeds up
to 150 cu. ft per hour, variable length (10'–12'), 5" inch pitch, 5.5 " diameter, stainless steel conveyor screw. Hopper Agitation, Separate
motor-controlled agitator blade to regulate product into flights of conveyor screw.
Machine Dimensions: 113" wide X 92" high
Controls: Forward/Reverse switch, Vibration & Agitation selector switches. Power Indicator, Emergency Stop, Reset switch, Screwfeeder Jog-Run-Off
selector,
Electrical Requirements: 208/230/460v, 3-phase, 60 HZ.
Construction: Stainless steel contact parts
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Texas
Skidding:$500
Load Out:$480
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
***Assets are located at multiple locations.***
AUCTION DATE: lots start closing on Tuesday, January 18th at 10:00 am PT
LOCATION: **Note** Assets located at multiple locations. PLEASE READ THE DESCRIPTIONS!
1310 Mountain View Circle, Azusa, California
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1-Used All-Fill Powder Elevator Model: ISC
Serial Number: 300689C
Mode: ISC
MFG:2013
Electrical Requirements: 208/230/460v, 3-phase, 60 HZ.
Construction: Stainless steel contact parts
Even the most accurate of fillers can only operate with a reliable, regulated, consistent supply of product to the hopper. All-Fill complements its auger filling machines with a complete line of efficient, reliable delivery systems for free-flowing powders, non flowing products, and bulk solids. All-Fill offers both horizontal and inclined screwfeeder equipment for the bulk supply of product to your filling equipment. Model ISC can be used to refill filling machine hoppers and can also be useful in transferring product from different height levels
Auger screw conveyor dimensions: 5" diameter X 10' Length
Construction: Stainless Steel Frame – Welded and polished type-304 stainless steel product contact parts, Mounting frame with adjustable feet and
removable hopper cover
Sizes: 5.5” dia. X 10’ long ground and polished stainless steel screw with matching, pivoting housing, Adjustable discharge height, standard 74"
Features:
Includes ¼ hp, 1400 rpm drive and controls, 6 cu. ft. hopper with hinged cover, safety limit switches on hopper covers, delivery speeds up
to 150 cu. ft per hour, variable length (10'–12'), 5" inch pitch, 5.5 " diameter, stainless steel conveyor screw. Hopper Agitation, Separate
motor-controlled agitator blade to regulate product into flights of conveyor screw.
Machine Dimensions: 113" wide X 92" high
Controls: Forward/Reverse switch, Vibration & Agitation selector switches. Power Indicator, Emergency Stop, Reset switch, Screwfeeder Jog-Run-Off
selector,
Electrical Requirements: 208/230/460v, 3-phase, 60 HZ.
Construction: Stainless steel contact parts
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Texas
Skidding:$500
Load Out:$480
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
***Assets are located at multiple locations.***
AUCTION DATE: lots start closing on Tuesday, January 18th at 10:00 am PT
LOCATION: **Note** Assets located at multiple locations. PLEASE READ THE DESCRIPTIONS!
1310 Mountain View Circle, Azusa, California
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com