Lot

37

FES International Spray Dryer

In Multi-Industry Manufacturing & Packaging Equip...

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 818-495-3038 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/28
FES International Spray Dryer - Image 1 of 28
FES International Spray Dryer - Image 2 of 28
FES International Spray Dryer - Image 3 of 28
FES International Spray Dryer - Image 4 of 28
FES International Spray Dryer - Image 5 of 28
FES International Spray Dryer - Image 6 of 28
FES International Spray Dryer - Image 7 of 28
FES International Spray Dryer - Image 8 of 28
FES International Spray Dryer - Image 9 of 28
FES International Spray Dryer - Image 10 of 28
FES International Spray Dryer - Image 11 of 28
FES International Spray Dryer - Image 12 of 28
FES International Spray Dryer - Image 13 of 28
FES International Spray Dryer - Image 14 of 28
FES International Spray Dryer - Image 15 of 28
FES International Spray Dryer - Image 16 of 28
FES International Spray Dryer - Image 17 of 28
FES International Spray Dryer - Image 18 of 28
FES International Spray Dryer - Image 19 of 28
FES International Spray Dryer - Image 20 of 28
FES International Spray Dryer - Image 21 of 28
FES International Spray Dryer - Image 22 of 28
FES International Spray Dryer - Image 23 of 28
FES International Spray Dryer - Image 24 of 28
FES International Spray Dryer - Image 25 of 28
FES International Spray Dryer - Image 26 of 28
FES International Spray Dryer - Image 27 of 28
FES International Spray Dryer - Image 28 of 28
FES International Spray Dryer - Image 1 of 28
FES International Spray Dryer - Image 2 of 28
FES International Spray Dryer - Image 3 of 28
FES International Spray Dryer - Image 4 of 28
FES International Spray Dryer - Image 5 of 28
FES International Spray Dryer - Image 6 of 28
FES International Spray Dryer - Image 7 of 28
FES International Spray Dryer - Image 8 of 28
FES International Spray Dryer - Image 9 of 28
FES International Spray Dryer - Image 10 of 28
FES International Spray Dryer - Image 11 of 28
FES International Spray Dryer - Image 12 of 28
FES International Spray Dryer - Image 13 of 28
FES International Spray Dryer - Image 14 of 28
FES International Spray Dryer - Image 15 of 28
FES International Spray Dryer - Image 16 of 28
FES International Spray Dryer - Image 17 of 28
FES International Spray Dryer - Image 18 of 28
FES International Spray Dryer - Image 19 of 28
FES International Spray Dryer - Image 20 of 28
FES International Spray Dryer - Image 21 of 28
FES International Spray Dryer - Image 22 of 28
FES International Spray Dryer - Image 23 of 28
FES International Spray Dryer - Image 24 of 28
FES International Spray Dryer - Image 25 of 28
FES International Spray Dryer - Image 26 of 28
FES International Spray Dryer - Image 27 of 28
FES International Spray Dryer - Image 28 of 28
Auctioneer has chosen not to publish the price of this lot
Multiple Locations Read The Description, California
10.25%
18.00%

1 Used FES International Spray Dryer with High-Pressure Pump and Blower Fan

Spray Dryer
Model
: NC-10-8-3-1-160-B
S/N: D-15888-4099
Power: 460 V AC, 3 Phase, 60 Hz
Natural Gas: 3500cfm
Water: 50-60 Psi, 3 gpm/min
Compressed Air: 100psi, 30 scfm, clean and dry air

High-Pressure Pump
Model
: HP-700-1.25-3-P-20-3K
S/N: D-16309-4099

Feed Pump
WAUKESHA Universal model 15 [ump with double "o" - ring seal and water coolantconnections for feeding product to the high pressure pump and circulating CIP solutions.
SUMITOMO .75kVa (1.0 hp) gear drive motor; Power: 460 VAC, 60Hz, 3 phase.
WEG Inverter speed control for varying flow rated to the pump.

In-line Filters
A Dual Filter-Strainer is installed immediately shead of the product feed tank to strain the fluid product to be dried. Two strainers are furnished, so that one may be cleaned while the other is operating.
This assembly is a model M-4 screen unit with 0.8 mm (.030") unless specified otherwise by the Purchaser. Each strainer has 0.19 m² (2.0 ft²) of perforated metal.
Unit is completely piped with four (4) manually-operated butterfly valves and fittings.

High Pressure Pump

  • One Model HP-700 high pressure pump with a flow rate capacity of 1350 litres per hour of liquid seaweed slurry (standard and concentrated up to 23%). Temperature to be 37F (3C). Pressure to be 3000 psi (200 bar).
  • Type 17-4 stainless steel plungers. 29 mm (1.125") diameter hardened to Rockwell 44.
  • Field replaceble seats of Rexalloy number 35.
  • Ball style Valves.
  • USDA approved plunger seals.
  • Fluid Cylinder, type 15-5 PH stainless steel hardened to Rockwell number 33.
  • 5:1 gear reduction. 100 RPM output speed at capacity.
  • 15 horsepower 460 / 3 / 60 SUMITOMO gearmotor drive system.
  • Block mounted pressure Transmitter gauge 0-5,000 psig (0-300 bar).
  • Stainless steel adjustable legs.
  • Stainless steel type 304SS shroud covers all sides and top of pump assembly.
  • Drive components are fusion powder coated epoxy finished for long maintenance-free service.
  • Plunger solenoid water service valve.
  • Inlet water filter.
  • Plexiglas view port for plunger area.
  • View port for crankcase oil.
  • View portfor gearpak oil.

Variable Speed Control

  • A variable speed drive is provided as part of the control for operation of the high-pressure pump. The high pressure pump speed is controlled by a temperature controller that controls the spray drying chamber to an exact temperature by chaging the speed of the pumo to correct variations in inlet temperature, product feed temperature and product feed solids.
  • The variable speed controller allows for minimal use of the Bypass Relief Valve thus protecting product quality by passing it through the high pressure pump only one time.
  • The use of the variable speed drive assures close moisture control in the final dried product, which usually is physically monitored. 

Inlet Air Filter

  • The 3 x 3 Inlet Air Filter unit includes a galvanized steel frame that holds nine (9) prefilters and nine (9) high effeciency final filters. There is an access door on both sides of the frame for inspeting and replacing filter elements.
  • The prefilters are a disposable media which serve to remove coarse particles from the process air stream and protect the final filters from premature fouling.
  • The final filters are disposable high efficiency modules having a minimum average efficiency of 90 - 95% when tested in accordance with ASHRAE Synthetic Dust Arrestance test procedure. They are designed to remove particles down to 5u

Blower Fan
Model: Inlet Fan
Type: BC-SW
S/N: 07-229172-1-1
Size: 300
ARR: 9R
Class: 3

Operation:
Product:
Seaweed 
Liquid Feed: KG/HR 2326 LBS/ HR
Feed Solids: 5%
Feed Temp: 37.4F
Inlet Temp: 32F
Exhause Temp: 140F
Evaporation Capacity: 2204 lbs/hr
Powder Rate(kg/hr): 122lbs hr
Powder Moisture: 5%

Water Make Up Tank:
FES 120L Tank

General Info:
Spray drying calculations take the ambient conditions such as humidity and temperature as well as ground-level into consideration. These parameters have a huge influence on the air amount required to dry the feed into powder. The main air system consists of air filters, pre-heating systems, air heater, supply fan and from time to time dehumidification system. The main air system is constructed according to the actual requirements of the product and the ambient conditions.



Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Springville, UT

Load Out: TBD
Skidding: TBD

1 Used FES International Spray Dryer with High-Pressure Pump and Blower Fan

Spray Dryer
Model
: NC-10-8-3-1-160-B
S/N: D-15888-4099
Power: 460 V AC, 3 Phase, 60 Hz
Natural Gas: 3500cfm
Water: 50-60 Psi, 3 gpm/min
Compressed Air: 100psi, 30 scfm, clean and dry air

High-Pressure Pump
Model
: HP-700-1.25-3-P-20-3K
S/N: D-16309-4099

Feed Pump
WAUKESHA Universal model 15 [ump with double "o" - ring seal and water coolantconnections for feeding product to the high pressure pump and circulating CIP solutions.
SUMITOMO .75kVa (1.0 hp) gear drive motor; Power: 460 VAC, 60Hz, 3 phase.
WEG Inverter speed control for varying flow rated to the pump.

In-line Filters
A Dual Filter-Strainer is installed immediately shead of the product feed tank to strain the fluid product to be dried. Two strainers are furnished, so that one may be cleaned while the other is operating.
This assembly is a model M-4 screen unit with 0.8 mm (.030") unless specified otherwise by the Purchaser. Each strainer has 0.19 m² (2.0 ft²) of perforated metal.
Unit is completely piped with four (4) manually-operated butterfly valves and fittings.

High Pressure Pump

  • One Model HP-700 high pressure pump with a flow rate capacity of 1350 litres per hour of liquid seaweed slurry (standard and concentrated up to 23%). Temperature to be 37F (3C). Pressure to be 3000 psi (200 bar).
  • Type 17-4 stainless steel plungers. 29 mm (1.125") diameter hardened to Rockwell 44.
  • Field replaceble seats of Rexalloy number 35.
  • Ball style Valves.
  • USDA approved plunger seals.
  • Fluid Cylinder, type 15-5 PH stainless steel hardened to Rockwell number 33.
  • 5:1 gear reduction. 100 RPM output speed at capacity.
  • 15 horsepower 460 / 3 / 60 SUMITOMO gearmotor drive system.
  • Block mounted pressure Transmitter gauge 0-5,000 psig (0-300 bar).
  • Stainless steel adjustable legs.
  • Stainless steel type 304SS shroud covers all sides and top of pump assembly.
  • Drive components are fusion powder coated epoxy finished for long maintenance-free service.
  • Plunger solenoid water service valve.
  • Inlet water filter.
  • Plexiglas view port for plunger area.
  • View port for crankcase oil.
  • View portfor gearpak oil.

Variable Speed Control

  • A variable speed drive is provided as part of the control for operation of the high-pressure pump. The high pressure pump speed is controlled by a temperature controller that controls the spray drying chamber to an exact temperature by chaging the speed of the pumo to correct variations in inlet temperature, product feed temperature and product feed solids.
  • The variable speed controller allows for minimal use of the Bypass Relief Valve thus protecting product quality by passing it through the high pressure pump only one time.
  • The use of the variable speed drive assures close moisture control in the final dried product, which usually is physically monitored. 

Inlet Air Filter

  • The 3 x 3 Inlet Air Filter unit includes a galvanized steel frame that holds nine (9) prefilters and nine (9) high effeciency final filters. There is an access door on both sides of the frame for inspeting and replacing filter elements.
  • The prefilters are a disposable media which serve to remove coarse particles from the process air stream and protect the final filters from premature fouling.
  • The final filters are disposable high efficiency modules having a minimum average efficiency of 90 - 95% when tested in accordance with ASHRAE Synthetic Dust Arrestance test procedure. They are designed to remove particles down to 5u

Blower Fan
Model: Inlet Fan
Type: BC-SW
S/N: 07-229172-1-1
Size: 300
ARR: 9R
Class: 3

Operation:
Product:
Seaweed 
Liquid Feed: KG/HR 2326 LBS/ HR
Feed Solids: 5%
Feed Temp: 37.4F
Inlet Temp: 32F
Exhause Temp: 140F
Evaporation Capacity: 2204 lbs/hr
Powder Rate(kg/hr): 122lbs hr
Powder Moisture: 5%

Water Make Up Tank:
FES 120L Tank

General Info:
Spray drying calculations take the ambient conditions such as humidity and temperature as well as ground-level into consideration. These parameters have a huge influence on the air amount required to dry the feed into powder. The main air system consists of air filters, pre-heating systems, air heater, supply fan and from time to time dehumidification system. The main air system is constructed according to the actual requirements of the product and the ambient conditions.



Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Springville, UT

Load Out: TBD
Skidding: TBD

Multi-Industry Manufacturing & Packaging Equipment

Ends from

General delivery information available from the auctioneer

Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.

Important Information

***Assets are located at multiple locations.*** 

AUCTION DATE: lots start closing on Tuesday, December 14th at 10:00 am PT

LOCATION: **Note** Assets located at multiple locations. PLEASE READ THE DESCRIPTIONS!

1310 Mountain View Circle, Azusa, California

INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038

PICKUP: TBD

RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger. 

18% Buyers Premium applies on all online purchases.  

  

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Friday, 8:00 AM EST – 8:00 PM EST

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

 

 

 

 

Terms and Conditions

Terms of Sale Agreement:

SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS

  1. Only Credit Card, Wire Transfers or Cashier’s Checks payable to Chris Hillseth Enterprises will be accepted for payment. No equipment will be removed from the sale site until payment is received by Chris Hillseth Enterprises. NO EXCEPTIONS! NO PAYMENT TAKEN ON SITE.
  2. While descriptions are believed to be correct, the seller’s agent or the owners make no warranties or guarantees expressed or implied, as to the genuineness, authenticity of, or defect in any lot and will not be held responsible for advertising discrepancies or inaccuracies. Everything sold AS IS and WHERE IS except as expressly made in writing. No warranties are made as to the merchantability of any items or their fitness for any purpose. Inspect before you bid, absolutely no warranty or guarantee of any kind, either written or implied.
  3. For bidding approval, at its discretion, Chris Hillseth Enterprises Corp may contact Bidders via email or telephone before to provide a deposit. Require a deposit of up to $10,000.00 USD (refundable without purchase) for lack of sufficient Bidspotter history e.g. first time Bidspotter registrant or negative Bidspotter history. Bidder will be notified if it is determined a deposit must be made. If Chris Hillseth Enterprises does not receive a response from its attempts to contact Buyer or if the Buyer does not provide a deposit, Chris Hillseth Enterprises reserves the right to refuse or cancel Buyer’s bids and re-sell Goods.
  4. Some items may have minimums or reserves. Therefore, bidder acknowledges they have been informed that Auctioneer may bid at the auction for its own account or on behalf of a third party or the seller.
  5. Purchaser hereby agrees to defend, indemnify and hold harmless Seller its directors, officers, employees and other agents and representatives from and against any and all liabilities, judgments, claims, settlements, losses, damages, penalties, obligations and expenses, including attorney`s fees and expenses and other professional fees and expenses, incurred or suffered by such person arising from, by reason of, or in connection with any loss, damage or injury to person or property arising from, by reason of or in connection with the Goods sold hereunder. This indemnification shall survive delivery of the Goods to Purchaser and any subsequent sale or other transfer of the Goods to a third party.
  6. It is the buyers’ responsibility to secure all safety equipment to meet all applicable government safety standards in using or removing items purchased.
  7. Sales Tax will be added to the purchase of all taxable items. Dealers who purchase for resale must file their resale permit numbers. If sales tax is not collected at the time of sale and is deemed “needed to be paid” at a later date, buyer agrees to pay all required taxes.
  8. Purchaser does hereby indemnify and hold harmless auctioneer and seller from any and all damages, claims or liabilities from injuries to persons or property of any type whatsoever caused during the sale or by the removal of items purchased.
  9. Sellers agent and Seller shall have no liability to the purchaser due to non-delivery of any item for any reason other than to return to the Purchaser the monies deposited for non-delivered items.
  10. In the event the purchaser fails to pay the whole of the purchase within the time set forth by the auctioneers and/or fails to comply with any of the conditions or terms of sale, the seller may retain and/or recover the deposit specified as liquidated damages and, in addition thereto, items that are not paid for can be resold at public or private sale without further notice. Any deficiency resulting from such resale shall be paid to the auctioneers by the defaulting purchaser together with all charges, fees, and expenses incurred by such resale and enforcement of the obligation hereunder.
  11. The Bidder becomes solely responsible for all items purchased by him immediately following his winning bid at the auction. Therefore, he is advised to further guard and insure his items at his own discretion.
  12. No item can, on any account, be removed before buyer receives payment in full. Removal shall be at the expense, risk and liability of the purchaser. Auctioneers shall not be responsible for items not removed within the time allowed. If equipment is not removed within specified removal time, purchaser shall be liable for any moving and storage costs incurred and, if not so removed, the items shall be deemed abandoned.
  13. If any shortage exists on estimated counts, an adjustment will be made if claims are made at time of removal. No adjustment will be allowed after items are removed from the premises.
  14. If any dispute arises between two or more bidders, the sellers’ agent may or may not put the lot up again at once, and resell.
  15. The sellers’ agent, when acting as agent only, is not responsible for acts of its principals.
  16. A 18% Buyers premium will be applied to all sales in Addition to Applicable Local and State Sales Tax.
  17. By accepting a sale listing catalog and signing this form the buyer agrees to these terms and any announced terms at the sale.
  18. You will receive notifications from us regarding your purchases.
  19. Seller reserves the right to accept or reject any and all bids.
  20. All Bills must be completed on Day of Sale unless arrangements are made with Auction House prior to bidding.
  21. Full Payment at Termination of Sale.
  22. A 3% fee will be applied to all CC orders.
  23. Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates.

 

Inspection date (day only) is:  

By Appointment Only. Call 818 495 3038 to Schedule.

Inspection locations:

Various Locations, call for specific item.

Inspection by appointment only. 

Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com

See Full Terms And Conditions