8046
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
8046
1- Used Aaron Process Equipment Company 150 Cu Ft Ribbon Blender with Mezzanine
Aaron Process Equipment Company
S/N: 101500401062IMB
150 Cubic Foot
40 HP
NEW IN 2010
Aaron Process model IMB150 double ribbon blender. Working capacity: 150 cubic feet Full capacity:175 cubic feet Trough: Constructed of T304 stainless steel material on all product contact areas, all external stiffeners, legs, ribs and supports. Inside trough measures 53" wide x 106" long x 58" deep. Flanged (ANSI 150 lbs.) 10" center bottom outlet. Mill finish exterior and mirror finish interior. Agitator: Double ribbon design constructed of T304 stainless steel material. Outer ribbon measures1/2" thick x 21/ 2" wide. Inner ribbon measures 3/8" thick x 2 1/2" wide. (9) diamond shaped support posts 3/4" thick. 51/ 2" diameter main shaft. Arranged for center bottom discharge. Removable
agitator. Mirror polish finish. Cover: Three (3)piece top cover with safety grates mounted beneath. Proximity switch furnished for customer hookup. Discharge: Pneumatically operated knife gate valve. 10" diameter opening. T304 stainless steel on all product contact areas. Furnished with discharge valve guard. Glands: Cast T304 stainless steel split housings supplied with Teflon rope packing. Complete with split T304 stainless steel pusher and T304 stainless steel backing plate Bearings: Heavy duty self-aligning outboard pillow block support bearings. Drive: 40 HP 3 PH/60Hz/230460 volt TEFC gear motor, chain driven to an agitator shaft, arranged for 25 RPM output agitator speed. Furnished with totally enclosed chain guard. All electrical supplies and ancillary components are to be furnished by the customer.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Chandler,Az
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
Nutritional Supplement Facility Equipment Auction
Auction Date: lots start closing on Thursday, April 23rd at 10:00 am PST
Please Note: the assets are located in multiple locations.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1- Used Aaron Process Equipment Company 150 Cu Ft Ribbon Blender with Mezzanine
Aaron Process Equipment Company
S/N: 101500401062IMB
150 Cubic Foot
40 HP
NEW IN 2010
Aaron Process model IMB150 double ribbon blender. Working capacity: 150 cubic feet Full capacity:175 cubic feet Trough: Constructed of T304 stainless steel material on all product contact areas, all external stiffeners, legs, ribs and supports. Inside trough measures 53" wide x 106" long x 58" deep. Flanged (ANSI 150 lbs.) 10" center bottom outlet. Mill finish exterior and mirror finish interior. Agitator: Double ribbon design constructed of T304 stainless steel material. Outer ribbon measures1/2" thick x 21/ 2" wide. Inner ribbon measures 3/8" thick x 2 1/2" wide. (9) diamond shaped support posts 3/4" thick. 51/ 2" diameter main shaft. Arranged for center bottom discharge. Removable
agitator. Mirror polish finish. Cover: Three (3)piece top cover with safety grates mounted beneath. Proximity switch furnished for customer hookup. Discharge: Pneumatically operated knife gate valve. 10" diameter opening. T304 stainless steel on all product contact areas. Furnished with discharge valve guard. Glands: Cast T304 stainless steel split housings supplied with Teflon rope packing. Complete with split T304 stainless steel pusher and T304 stainless steel backing plate Bearings: Heavy duty self-aligning outboard pillow block support bearings. Drive: 40 HP 3 PH/60Hz/230460 volt TEFC gear motor, chain driven to an agitator shaft, arranged for 25 RPM output agitator speed. Furnished with totally enclosed chain guard. All electrical supplies and ancillary components are to be furnished by the customer.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Chandler,Az
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
Nutritional Supplement Facility Equipment Auction
Auction Date: lots start closing on Thursday, April 23rd at 10:00 am PST
Please Note: the assets are located in multiple locations.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com