433
Lot
433
1- Used Cassel Shark 2 Metal Check.
Sum of lots 431-440 must exceed the price of lot 430 in order for individual items to sell.
Outstanding performance even for foods with strong product effect
The METAL SHARK® 2A controller sets a new industry benchmark for performance, user-friendliness and ease of data storage.
Improved performance results from Cassel?s exclusive Four-Quadrant technology, which allows for a 360 degree freestyle teach area around the product effect, significantly increasing sensitivity. Cassel equipment readily adjusts settings to detect metals even in such products as cheese and high-salt content foods, where detection can be a challenge.
Setting standards for testing is simple. Users are guided through a series of easy-to-understand, high-color screens. An on-board “teaching assistant” offers help, if needed. Password protection ensures that only authorized users can operate the equipment.
Documentation of data required by HACCP, IFS, BRC and GMP is automatically recorded by METAL SHARK 2A. Metal contaminant detections, changes in parameter settings or other data is logged, along with the time and date. Reports can be downloaded to a Windows-based PC for permanent storage and record-keeping. Cassel Metal Detectors can also be programmed to automatically remind the operator to test equipment performance at pre-set intervals.
Digital Balance Control adjusts for temperature and humidity fluctuations by monitoring coil balance more than 200 times per second.
Digital Frequency Control utilizes synthesizer technology to generate a constant and stable frequency and phase during extended use.
Digital Dynamic Noise Filter reduces or eliminates electronic and vibration signals in the environment, creating a more reliable signal.
Quick teach with graphic assist allows the Metal Detector to be operational in less than 10 passes.
Intuitive operation: A full-color 5.4? display panel shows only the information needed to operate the detector. Easy-to-follow software and a simple teaching menu allows set up and use by non-technical personnel. Over 120 products can be stored and recalled. A four-level password protection system ensures that only authorized users can operate the equipment. Operators can easily call up histograms, reports, diagrams or help screens. Performance Validation Software (PVS test) automatically notifies the operator when testing is required.
No maintenance electronics: Automatic balance and calibration of electronics ensures many years of reliable performance. After initial set up, no further adjustment of electronics is needed. Single frequency is standard. Multi-frequency is an available option.
Sensitivity + Stability = Satisfaction: New “recipes” or changes to current data are easily programmed. Digital noise filters eliminate any undesired signals, while multichannel technology provides optimum detection of ferrous, nonferrous or stainless steel contaminants. The integrated sensor is built to withstand the rigors of harsh production settings. Key internal electronics are fully protected and reliably perform in even the most challenging wet or dry environments.
HACCP and IFS compliance: HACCP and IFS compliance: Per HACCP principles, Metal Detectors are considered a critical control point and require continuous checking to meet standards. Metal contaminant detections, changes in parameter settings, etc., are logged with both the date and time. Users can easily view reports and download information to a Windows-based PC. Ethernet option is included.
Compatible Windows software: SHARKNET® 2A
Stainless steel enclosure: Module is housed inside a stainless steel enclosure, fabricated up to IP69K. Other optional enclosures are available for wet or wash-down environments.
Remote support via Internet: With the METAL SHARK® 2A Controller and an optional Ethernet module it is possible that a Cassel Service engineer can perform remote support on the metal detector. This can save high traveling costs for service engineers.
Rigging and Load Out: $400
Location: Oxnard, California 93030
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
Supreme Formulation Facility Auction
Auction Date: lots start closing on Thursday, November 21st, 2019 at 10:00 am PST
Location: Oxnard, California
Machine will be available for Pickup Starting the first week of December
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Financing Contacts:
Jupitor Financial Services Inc.
Paul Natale
561 301 0448
CIT Group
https://apply.directcapital.com/referral/tmirolla
Scott Soslow
Marlin Finance
SSoslow@marlinfinance.com
856-359-9111
Transportation Contacts:
Dunkel Logistics
Machinery Moving & Rigging
Jeff Dunkel
510 520.7842 cell
44850 Industrial Drive Unit D
Fremont, CA 94538
email dunkellogistics@att.net
John Cunningham
Logistics Consultant
Unishippers
Office:321-733-6682
John.Cunningham@Unishippers.com
Eric McMillan
Freightquote.com
Office: 800.323.5441 x1097
Fax: 913.850.7785
Email: emcmillan@freightquote.com
JOHNNY BARACEWICZ
ADCOM WORLDWIDE
Transportation Services
Toll Free – 800-370-7700
auctionquote@adcomworldwide.com
Andrew Starling
UTi
Email: astarling@go2uti.com
Office: 866.469.5846 or 541.773.3993 x 21571
Fax:541.227.0108
Admiral Merchants ( Flat bed service.
Jerry Sakowski <jerrysakowski@hotmail.com>
P: 716-240-8424
C: 716-870-2860
F: 516-740-3898
Flat bed service.
Tandi Newman
JB Hunt
Tandi_Newman@jbhunt.com
Office:479.820.7489
Cell: 479.366.7976
Fax: 479.820.2828
Joshua N. Oswald
Total Quality Logistics
Office: 513-831-2600 x 57232
Fax: 513-947-3760
Cell: 419-357-9607
Email: JOswald@tql.com
Colton Scott
Echo Global Logistics
Office 312-784-4261
FAX: 312-784-4262
Email: coscott@echo.com
Jamie Bennett
Pioneer Transfer
Main:(402)564-3390 ext.224
Fax: (402)564-3050
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Randy Aguilar at (818)495-3038 randy@hillseth.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1- Used Cassel Shark 2 Metal Check.
Sum of lots 431-440 must exceed the price of lot 430 in order for individual items to sell.
Outstanding performance even for foods with strong product effect
The METAL SHARK® 2A controller sets a new industry benchmark for performance, user-friendliness and ease of data storage.
Improved performance results from Cassel?s exclusive Four-Quadrant technology, which allows for a 360 degree freestyle teach area around the product effect, significantly increasing sensitivity. Cassel equipment readily adjusts settings to detect metals even in such products as cheese and high-salt content foods, where detection can be a challenge.
Setting standards for testing is simple. Users are guided through a series of easy-to-understand, high-color screens. An on-board “teaching assistant” offers help, if needed. Password protection ensures that only authorized users can operate the equipment.
Documentation of data required by HACCP, IFS, BRC and GMP is automatically recorded by METAL SHARK 2A. Metal contaminant detections, changes in parameter settings or other data is logged, along with the time and date. Reports can be downloaded to a Windows-based PC for permanent storage and record-keeping. Cassel Metal Detectors can also be programmed to automatically remind the operator to test equipment performance at pre-set intervals.
Digital Balance Control adjusts for temperature and humidity fluctuations by monitoring coil balance more than 200 times per second.
Digital Frequency Control utilizes synthesizer technology to generate a constant and stable frequency and phase during extended use.
Digital Dynamic Noise Filter reduces or eliminates electronic and vibration signals in the environment, creating a more reliable signal.
Quick teach with graphic assist allows the Metal Detector to be operational in less than 10 passes.
Intuitive operation: A full-color 5.4? display panel shows only the information needed to operate the detector. Easy-to-follow software and a simple teaching menu allows set up and use by non-technical personnel. Over 120 products can be stored and recalled. A four-level password protection system ensures that only authorized users can operate the equipment. Operators can easily call up histograms, reports, diagrams or help screens. Performance Validation Software (PVS test) automatically notifies the operator when testing is required.
No maintenance electronics: Automatic balance and calibration of electronics ensures many years of reliable performance. After initial set up, no further adjustment of electronics is needed. Single frequency is standard. Multi-frequency is an available option.
Sensitivity + Stability = Satisfaction: New “recipes” or changes to current data are easily programmed. Digital noise filters eliminate any undesired signals, while multichannel technology provides optimum detection of ferrous, nonferrous or stainless steel contaminants. The integrated sensor is built to withstand the rigors of harsh production settings. Key internal electronics are fully protected and reliably perform in even the most challenging wet or dry environments.
HACCP and IFS compliance: HACCP and IFS compliance: Per HACCP principles, Metal Detectors are considered a critical control point and require continuous checking to meet standards. Metal contaminant detections, changes in parameter settings, etc., are logged with both the date and time. Users can easily view reports and download information to a Windows-based PC. Ethernet option is included.
Compatible Windows software: SHARKNET® 2A
Stainless steel enclosure: Module is housed inside a stainless steel enclosure, fabricated up to IP69K. Other optional enclosures are available for wet or wash-down environments.
Remote support via Internet: With the METAL SHARK® 2A Controller and an optional Ethernet module it is possible that a Cassel Service engineer can perform remote support on the metal detector. This can save high traveling costs for service engineers.
Rigging and Load Out: $400
Location: Oxnard, California 93030
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
Supreme Formulation Facility Auction
Auction Date: lots start closing on Thursday, November 21st, 2019 at 10:00 am PST
Location: Oxnard, California
Machine will be available for Pickup Starting the first week of December
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Financing Contacts:
Jupitor Financial Services Inc.
Paul Natale
561 301 0448
CIT Group
https://apply.directcapital.com/referral/tmirolla
Scott Soslow
Marlin Finance
SSoslow@marlinfinance.com
856-359-9111
Transportation Contacts:
Dunkel Logistics
Machinery Moving & Rigging
Jeff Dunkel
510 520.7842 cell
44850 Industrial Drive Unit D
Fremont, CA 94538
email dunkellogistics@att.net
John Cunningham
Logistics Consultant
Unishippers
Office:321-733-6682
John.Cunningham@Unishippers.com
Eric McMillan
Freightquote.com
Office: 800.323.5441 x1097
Fax: 913.850.7785
Email: emcmillan@freightquote.com
JOHNNY BARACEWICZ
ADCOM WORLDWIDE
Transportation Services
Toll Free – 800-370-7700
auctionquote@adcomworldwide.com
Andrew Starling
UTi
Email: astarling@go2uti.com
Office: 866.469.5846 or 541.773.3993 x 21571
Fax:541.227.0108
Admiral Merchants ( Flat bed service.
Jerry Sakowski <jerrysakowski@hotmail.com>
P: 716-240-8424
C: 716-870-2860
F: 516-740-3898
Flat bed service.
Tandi Newman
JB Hunt
Tandi_Newman@jbhunt.com
Office:479.820.7489
Cell: 479.366.7976
Fax: 479.820.2828
Joshua N. Oswald
Total Quality Logistics
Office: 513-831-2600 x 57232
Fax: 513-947-3760
Cell: 419-357-9607
Email: JOswald@tql.com
Colton Scott
Echo Global Logistics
Office 312-784-4261
FAX: 312-784-4262
Email: coscott@echo.com
Jamie Bennett
Pioneer Transfer
Main:(402)564-3390 ext.224
Fax: (402)564-3050
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Randy Aguilar at (818)495-3038 randy@hillseth.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com