6100
Ribbon Blender
1/7
20,000
USD
Gardena, California
0.00%
16.00%
Description
1-Used 150 CU FT HD RIBBON BLENDER 304 Stainless Sanitary Blender 150. Heavy duty,blending chamber measures 106” long x 53” wide x 58” deep.Trough thickness is approximately 8mm thick.Capacity of 178 cubic foot. “Certified Sanitary”. The legs, cross braces, and motor frame are all stainless steel construction. 3 stainless steel overlaping lids. Stainless steel handle, back rests, and hinges. The backrests allow the lid to rest in an open position at about 15 degrees past vertical in order to allow ease of loading the machine. Inside each lid is a lift out stainless steel grate. Every intersection of the cross bars in the grate is individually welded, ground, and polished so as to prevent contamination from harboring in the grate. Every grate location has an electrical safety sensor to insure that the grate is installed, or the lid closed, prior to operating the blender. Main Shaft And Ribbons: This machine has a 5-3/4” solid stainless steel main shaft which turns at 25 RPM’s. All welds are fully ground, buffed, then polished to a mirror finish. The inner ribbon is 75mm wide X 10mm thick. Center Bottom Discharge:10” diameter center bottom discharge. “Knife style” slide gate powered by an air cylinder which automatically opens and closes the slide gate upon command. The slide gate is mounted and runs on special UHMW tracks which are FDA and USDA approved. The discharge height from the floor to the bottom of the chute is 49-1/2". This chute is easily removable and contains a built-in sanitary safety grate and safety monitoring switches.Split Packing Glands: These blenders have solid stainless steel seals or packing glands located on each end of the blender. They are “split seals” for ease of cleaning and repairing. There is a special cut out in the bearing mounting plate to make maintenance of these packing glands fast, easy, sanitary, and efficient. Also, the glands have a built in “wheel puller” system to make their removal easier. Each gland is mounted with an air purge injection hole, pre-drilled then capped off with a sanitary plug should you wish to convert the machine to have air purged packing glands. Surface Finishes: All interior surfaces, including the walls of the blending chamber, lid, main shaft, spokes, ribbons, discharge gate, and discharge chute are polished to a “mirror finish” (over a 200 grit finish). This finish is two grades better than the standard “USDA Dairy” grade finish which is a standard in select industries. This is neither a glass bead nor electroplated finish which is not allowed in many USDA and pharmaceutical applications. This finish is applied by special grinding and buffing wheels to the bare stainless steel. All welded joints are equally well ground, buffed, and polished. This is the highest grade finish offered by any blender manufacturer known to us. Exterior finish on stainless steel surfaces is ground and buffed smooth to an attractive, professional finish. Drive Motor: This machine comes standard with a 50 HP washdown gear motor mounted on the machine which is on a stainless steel base. The motor is directly attached to the gearbox to insure a positive drive. The motor is rated for 50 HP, 220/440 volt, 1775 RPM, 3-phase, 60 cycle and runs through a 20:1 ratio gearbox. This assembly is very clean and sanitary as well as lower in maintenance costs as compared to a belt drive gearbox. The gearbox is then linked to the main blender shaft by way of a drive sprocket and chain. This direct drive system assures that virtually all of the horsepower from the motor is delivered to the mixing ribbon.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience. Location: 1185 Linda Vista Dr. San Marcos, CA 92078
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
1-Used 150 CU FT HD RIBBON BLENDER 304 Stainless Sanitary Blender 150. Heavy duty,blending chamber measures 106” long x 53” wide x 58” deep.Trough thickness is approximately 8mm thick.Capacity of 178 cubic foot. “Certified Sanitary”. The legs, cross braces, and motor frame are all stainless steel construction. 3 stainless steel overlaping lids. Stainless steel handle, back rests, and hinges. The backrests allow the lid to rest in an open position at about 15 degrees past vertical in order to allow ease of loading the machine. Inside each lid is a lift out stainless steel grate. Every intersection of the cross bars in the grate is individually welded, ground, and polished so as to prevent contamination from harboring in the grate. Every grate location has an electrical safety sensor to insure that the grate is installed, or the lid closed, prior to operating the blender. Main Shaft And Ribbons: This machine has a 5-3/4” solid stainless steel main shaft which turns at 25 RPM’s. All welds are fully ground, buffed, then polished to a mirror finish. The inner ribbon is 75mm wide X 10mm thick. Center Bottom Discharge:10” diameter center bottom discharge. “Knife style” slide gate powered by an air cylinder which automatically opens and closes the slide gate upon command. The slide gate is mounted and runs on special UHMW tracks which are FDA and USDA approved. The discharge height from the floor to the bottom of the chute is 49-1/2". This chute is easily removable and contains a built-in sanitary safety grate and safety monitoring switches.Split Packing Glands: These blenders have solid stainless steel seals or packing glands located on each end of the blender. They are “split seals” for ease of cleaning and repairing. There is a special cut out in the bearing mounting plate to make maintenance of these packing glands fast, easy, sanitary, and efficient. Also, the glands have a built in “wheel puller” system to make their removal easier. Each gland is mounted with an air purge injection hole, pre-drilled then capped off with a sanitary plug should you wish to convert the machine to have air purged packing glands. Surface Finishes: All interior surfaces, including the walls of the blending chamber, lid, main shaft, spokes, ribbons, discharge gate, and discharge chute are polished to a “mirror finish” (over a 200 grit finish). This finish is two grades better than the standard “USDA Dairy” grade finish which is a standard in select industries. This is neither a glass bead nor electroplated finish which is not allowed in many USDA and pharmaceutical applications. This finish is applied by special grinding and buffing wheels to the bare stainless steel. All welded joints are equally well ground, buffed, and polished. This is the highest grade finish offered by any blender manufacturer known to us. Exterior finish on stainless steel surfaces is ground and buffed smooth to an attractive, professional finish. Drive Motor: This machine comes standard with a 50 HP washdown gear motor mounted on the machine which is on a stainless steel base. The motor is directly attached to the gearbox to insure a positive drive. The motor is rated for 50 HP, 220/440 volt, 1775 RPM, 3-phase, 60 cycle and runs through a 20:1 ratio gearbox. This assembly is very clean and sanitary as well as lower in maintenance costs as compared to a belt drive gearbox. The gearbox is then linked to the main blender shaft by way of a drive sprocket and chain. This direct drive system assures that virtually all of the horsepower from the motor is delivered to the mixing ribbon.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience. Location: 1185 Linda Vista Dr. San Marcos, CA 92078
Industrial, Pharmaceutical & Manufacturing Equipment - ONLINE ONLY AUCTION
Ends from
Venue Address
16415 Ishida Ave
Gardena
California
90248
United States
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
Important Information
EQUIPMENT AUCTION OPEN NOW!
Processing, Packaging, Material Handling, Laboratory,
Bio-Pharma...and More
Featuring Biomedical Equipment From Baxter Labs
****NEW EQUIPMENT ADDED DAILY****
ABOUT US:
Chris Hillseth Enterprises is a leading supplier of new and used equipment and facilities for Pharmaceutical, Nutraceutical, Cosmetic, Battery and related industries.
Equipment includes:
Manufacturing
Packaging
Warehousing
Laboratory
For more information on Chris Hillseth Enterprises Click here to visit our web site.
Sign up here to keep up with all the latest auctions and new equipment arrivals:
Email: becky@hillseth.com
Phone: 818-495-3038
BidSpotter Customer Service Support Department
To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone, email or LiveChat
- Available Monday – Friday, 8:00am – 12:00am ET.
- Email: Support@bidspotter.com
- Office: 253-858-6777
- Frequently Asked Questions
Terms and Conditions
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
1. Only Checks, Wire Transfers or Cashiers Checks payable
to Chris Hillseth Enterprises will be accepted for payment. No
equipment will
be removed from the sale site until payment is received by Chris
Hillseth Enterprises.
NO EXCEPTIONS!
2. While descriptions are believed to be correct, the
sellers agent or the owners make no warranties or
guarantees expressed or implied, as to the genuineness,
authenticity of, or defect in any lot and will not be held
responsible for advertising discrepancies or inaccuracies.
Everything sold AS IS and WHERE IS except as expressly
made in writing. No warranties are made as to the
merchantability of any items or their fitness for any
purpose.
3. Purchaser hereby agrees to defend, indemnify and hold
harmless Seller its directors, officers, employees and
other agents and representatives from and against any and
all liabilities, judgments, claims, settlements, losses,
damages, penalties, obligations and expenses, including
attorney`s fees and expenses and other professional
fees and expenses, incurred or suffered by such person
arising from, by reason of, or in connection with any
loss, damage or injury to person or property arising from,
by reason of or in connection with the Goods sold
hereunder. This indemnification shall survive delivery of
the Goods to Purchaser and any subsequent sale or
other transfer of the Goods to a third party.
4. It is the buyers’ responsibility to secure all safety
equipment to meet all applicable government safety
standards in using or removing items purchased.
5. Sales Tax will be added to the purchase of all taxable
items. Dealers who purchase for resale must file their
resale permit numbers. If sales tax is not collected at the
time of sale and is deemed “needed to be paid” at a
later date, buyer agrees to pay all required taxes.
6. Purchaser does hereby indemnify and hold harmless
auctioneer and seller from any and all damages, claims
or liabilities from injuries to persons or property of any
type whatsoever caused during the sale or by the removal
of items purchased.
7. Sellers agent and Seller shall have no liability to the
purchaser due to non-delivery of any item for any reason
other than to return to the Purchaser the monies deposited
for non-delivered items.
8. In the event the purchaser fails to pay the whole of the
purchase within the time set forth by the auctioneers
and/or fails to comply with any of the conditions or terms
of sale, the seller may retain and/or recover the
deposit specified as liquidated damages and, in addition
thereto, items that are not paid for can be resold at
public or private sale without further notice. Any
deficiency resulting from such resale shall be paid to the
auctioneers by the defaulting purchaser together with all
charges, fees, and expenses incurred by such resale and
enforcement of the obligation hereunder.
9. The Bidder becomes solely responsible for all items
purchased by him immediately following his winning bid
at the auction. Therefore, he is advised to further guard
and insure his items at his own discretion.
10. No item can, on any account, be removed before buyer
receives payment in full. Removal shall be at the expense,
risk and liability of the purchaser. Auctioneers shall not
be responsible for items not removed within the time
allowed. If equipment is not removed within specified
removal time, purchaser shall be liable for any moving and
storage costs incurred and, if not so removed, the
items shall be deemed abandoned.
11. If any shortage exists on estimated counts, an
adjustment will be made if claims are made at time of
removal. No adjustment will be allowed after items are removed from
the premises.
12. If any dispute arises between two or more bidders, the
sellers’ agent may or may not put the lot up again at
once, and resell.
13. The sellers’ agent, when acting as agent only, is not
responsible for acts of its principals.
14. A 16% Buyers premium will be applied to all sales in
Addition to Applicable Local and State Sales Tax.
15. By accepting a sale listing catalog and signing this
form the buyer agrees to these terms and any announced
terms at the sale.
16.You will receive notifications from us regarding your
purchases.
17. Seller reserves the right to accept or reject any and all
bids.
18. All Bills must be completed on Day of Sale unless
arrangements are made with Auction House prior to bidding.
19.Full Payment at Termination of Sale.
20. A 3% fee will be applied to all CC orders.
21. Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates.
Inspection date (2 days only) is:
Inspection locations:
47444 Kato Rd
Fremont, CA 94538
1464 W 40 S#100
Lindon, UT 84042
16415 Ishida Ave
Gardena, CA 90248
Inspection by appointment only. Call or email Chris Hillseth at (626) 688-9578 / or Alex Garza at 626-340-7690 alex@hillseth.com
Finance Contact:
Scott Soslow
Marlin Finance
Transportation Contacts:
Dunkel Logistics
Machinery Moving & Rigging
Jeff Dunkel
510 520.7842 cell
44850 Industrial Drive Unit D
Fremont, CA 94538
email dunkellogistics@att.net
John Cunningham
Logistics Consultant
Unishippers
Office:321-733-6682
John.Cunningham@Unishippers.com
Eric McMillan
Freightquote.com
Office: 800.323.5441 x1097
Fax: 913.850.7785
Email: emcmillan@freightquote.com
JOHNNY BARACEWICZ
ADCOM WORLDWIDE
Transportation Services
Toll Free – 800-370-7700
auctionquote@adcomworldwide.com
Andrew Starling
UTi
Email: astarling@go2uti.com
Office: 866.469.5846 or 541.773.3993 x 21571
Fax:541.227.0108
Admiral Merchants ( Flat bed service.
Jerry Sakowski <jerrysakowski@hotmail.com>
P: 716-240-8424
C: 716-870-2860
F: 516-740-3898
Flat bed service.
Tandi Newman
JB Hunt
Tandi_Newman@jbhunt.com
Office:479.820.7489
Cell: 479.366.7976
Fax: 479.820.2828
Joshua N. Oswald
Total Quality Logistics
Office: 513-831-2600 x 57232
Fax: 513-947-3760
Cell: 419-357-9607
Email: JOswald@tql.com
Colton Scott
Echo Global Logistics
Office 312-784-4261
FAX: 312-784-4262
Email: coscott@echo.com
Jamie Bennett
Pioneer Transfer
Main:(402)564-3390 ext.224
Fax: (402)564-3050
Cell:(402)910-8016
Email:jbennett@pioneertransfer.com
Danna Creal (import and export)
ETC Int`l Freight System
Main: 310.632.2555 x101
Fax 310.632.3044
danna@etcinternational.com
Karen Oh (Korea import and export)
IREH LOGISTIC SERVICES, INC
T 562.590.6424 (EXT. 2)
F 562.590.6428 M. 310-995-2360
e-mail: ireh@irehusa.com
