G&H 1.5” stainless steel positive displacement pump, 3hp gearhead drive, stainless steel base. ...[more]

108" wide x 14' long I & H bi-directional table, all stainless steel, 2HP gear head drive. ...[more]

Posimat model Giramat-B bottle orienter, set up for 1 gallon F style jugs, serial number OC9524, 1998. ...[more]

30” wide x 9’ long stainless steel sorting conveyor, sloped sides, 1.5hp gearhead drive, with overhead sorting light, 33” high infeed, 40” high di...

Multi-Vac single pouch sealer, model KM100-3M, serial number 10223, for sealing 6" by 10" by 3" deep pouches, product is placed in vacuum chamber,...

Zig Zag continues blender, model 8", serial number C176590, 150 pounds per cubic feet maximum density, all stainless steel construction, 18" by 18...

CE Bauer 36" wide parabolic waste water screen (hydrasieve), 30" tall screen on a 42" tall deck, .060 flat wire screen, 4" inlet, 6" discharge, st...

CE Bauer 36" wide parabolic waste water screen (hydrasieve), 30" tall screen on a 42" tall deck, .060 flat wire screen, 4" inlet, 6" discharge, st...

18" wide x 11' long stainless steel case conveyor, 36" high, 23.75" wide sides, with drive. ...[more]

Mueller model AT40 B-20 plate and frame heat exchanger, (64) 18" x 56" plates for 450 square feet of surface area, 125PSI, National Board number 1...

Waukesha model 2105 stainless steel centrifugal pump, 4" ports, 25hp 1765rpm C-Face coupled drive, serial number 202875-97, 1997. ...[more]

Vertiflo model 1420 mild steel centrfugal pump, 5" x 4" with an 8" impellar, 7.5hp 1760rpm direct drive, 575v, 350gpm@45' head, serial number 88-7...

200 gallon liquifier, 24”x 24” opening, 35” x 35” x 45” deep, CIP header, requires drive motor, 3” flanged discharge, requires lid. ...[more]

Syntron shaker table, model number SFH 22DT, 30” wide x 82” long split in the two pans with 24” of screen area with 1/16” perforations, stainless ...

Trey Food spiral lowervator, 20” wide open grid Thermo plastic chain, 80” infeed, 6 foot long infeed, 8 ½” wide product lane, 4 turns, discharge p...

United Can Systems conveyor, 36" wide by 7 ft long with 15" wide 90 degree turn and 3 ft of straight. ...[more]

United Can Systems conveyor, 36" wide by 6 ft long, gear head motor drive. ...[more]

United Can Systems conveyor, for 71/2" wide thermoplastic flat top chain, 15" wide by 7 ft long, one gear head drive. ...[more]

Icore Autocheck 8000 check weigher, all stainless steel construction, with conveyor frame, missing load cell, control panel, and conveyor belting....

Ramsey timing worm, D/C drive, 4” diameter containers. ...[more]

34” wide x 118” long sorting belt conveyor, includes a 7” x 29 ½” magnet over belt discharge, food grade belt, hopper infeed at 78”, hopper measur...

500 gallon stainless steel tank, 72” diameter x 30” tall, covered top, with manhole, top mounted Lightnin’ mixer, 3” side bottom discharge. ...[m...

550 gallon stainless steel tank, 56” diameter, sloped bottom, 42” tall short side and 60” tall long side, 4” Tri-Clover discharge, open top. ...[...

Approximately 175 gallon stainless steel tank, 35” diameter, sloped bottom 39” and 49”, mezzanine mount, 4.5” flanged discharge. ...[more]

Crepaco model 6V2 stainless steel centrifugal pump, serial number 0018315, 2” x 1 ½” I-line fittings, 7 ½ HP, 3520 RPM, direct coupled motor. ......

34” wide x 118” long sorting belt conveyor, food grade belt, all stainless steel construction. ...[more]

34” wide x 118” long sorting belt conveyor, food grade belt, all stainless steel construction. ...[more]

Stainless steel riffle pan, 24” wide x 36” long, side cleanout. ...[more]

Lyco hopper, serial number MH030123664, all stainless steel construction, 5' x 5' opening, 3" x 3" square tube frame, 55" overall height, 30" x 30...

Abel case taper, top only, can handle up to 19" wide cases, currently set on 11", duel 2" wide by 24" long gripper belts, 110v electric motor driv...

Collamat model 9100 pressure sensitive labeler, can handle up to 10" wide label rolls, dual units were doing the tops of boxes, 2nd head allowed l...

Cantrell model MTO tote dumper, serial number ACH-0207-14, all stainless steel construction, can handle up to 48” x 40” totes, floor level infeed,...

Brabender model 8030 lab autoclave, serial number 970055, 6 bar or 87 PSI working pressure. ...[more]

Groen model CC20-E convection combo, serial number 06844 MS, 240 volt, built 1997, touchpad controls, 28” x 24” x 21” chamber. ...[more]

18” wide x 10’ long case conveyor, mild steel, gearhead chain drive. ...[more]

One lot of lab equipment, 3 bench top mixers, various whisks, 2 pots, International Equipment centrifuge. ...[more]

550 gallon stainless steel mix tank, 60” diameter x 46” tall, covered top, flat bottom, 4 paddle agitator requires drive, 2 hinged top covers, 6” ...

550 gallon stainless steel mix tank, 60” diameter x 46” tall, covered top, flat bottom, 4 paddle agitator requires drive, 2 hinged top covers, 6” ...

Cantrell model MTO tote dumper, serial number ACH-0207-16, all stainless steel construction, can handle up to 48” x 40” totes, floor level infeed,...

Stainless steel barrel dumper, 10” infeed elevator, 24” diameter barrel, 7’ discharge height, electrical drive, requires motor. ...[more]

Bran-Luebbe 3 head proportioning pump, 1 ½” I-line fittings, 2 HP drive, with actuators. ...[more]

1600 gallon stainless steel tank, 80” diameter, 75” tall, covered top, cone bottom, 18” man hole with cover, 3” tangential bottom discharge. ...[...

Cantrell stainless steel tote dumper, 40” x 48” totes or bins, 12” high infeed, 12’ discharge, with electric drive motor. ...[more]

Cantrell stainless steel tote dumper, 40” x 48” totes or bins, 12” high infeed, 12’ discharge, with electric drive motor. ...[more]

Cantrell stainless steel tote dumper, 40” x 48” totes or bins, 12” high infeed, 12’ discharge, with electric drive motor. ...[more]

MTC tote dumper, 40” x 48” bins or totes, floor level infeed, 13’ high lift, hydraulic lift and pivot, requires powerpack. ...[more]

24” wide x 45' long sorting belt conveyor, 64” of the ground, 6” tall sides, hydraulic drive, all stainless steel construction, requires belt. .....

Stainless steel merry-go-round conveyor, 2 each lane 14” wide, approximately 30' long, water trough for sort out discharge, belt 50” off the groun...

Stainless steel merry-go-round conveyor, 2 each 14” wide lanes, 24' long, water trough for sort out both sides, all stainless steel construction, ...

30” wide x 61' long distribution conveyor, belt is 142” off the ground, 8 hand operated gates on top and bottom, all stainless steel construction,...

20 gallon stainless steel slurry tank with Lightnin mixer, I.D. number A79R7857M, 2” Tri-Clover discharge, ½ HP, 1725 RPM, 230/460 volt, 3 phase, ...

Reliance Electronic easy clean plus model FB56C mixer, serial number P56X4506N, 28” long shaft, ½ HP, 1725 RPM, 60 HZ, 3 phase, 460 volts, 3 each ...

Videojet Excel 2000, serial number 051011050WD, 120/240 volt, on stand, with casters. ...[more]

Krones Autocol, left to right feed, timing screw to star infeed to turrets to discharge, 15 station turret, 2 label application sites, 30 station ...

Krones Solomatic, left to right feed, double high timing screw to infeed star to clockwise rotating turret to discharge star, 20 station, 3-3/4” c...

Stainless steel barrel dumper, can handle 22” wide x 38” tall bins, 9” infeed height, maximum dumping height of 55”, all stainless steel construct...

Stainless steel barrel dumper, can handle up to 36” wide x 40” tall barrels, 12” infeed height, maximum dumping height of 80”, 2 HP chain drive, a...

Stainless steel barrel dumper, can handle up to 36” wide x 40” tall barrels, 12” infeed height, maximum dumping height of 80”, 2 HP chain drive, a...

36” wide x 7.6' long stainless steel product conveyor, 36” wide x 92” long, sloped sides to help seal, 1 HP gearhead drive, all stainless steel co...

1 lot of 15-1/2" wide case conveyor, includes one 6' long straight section with drive, one 10-1/2' long straight section, one 11' long straight be...