Viper VT-25BL CNC Lathe, in working condition, Any tooling, vices, tombstones, chucks, or accessories seen in photographs will be sold separately

Metal cart, on casters ...[more]

SPINDLE TUBE LINERS FOR VIPER TURNING CENTER VT25VL

CUTTER ARBOR HOLDERS FOR KNEE MILLS

LARGE DIAMETER LIVE CENTER

SMW Spacesaver 2100 Barfeed

Mori Seiki SL-4 CNC Lathe, THIS MACHINE DOES NEED SOME WORK. Any tooling, vices, tombstones, chucks, or accessories seen in photographs will be so...

{ Choice of lots: 52A, 52B (P) } } } } } } } } } } } Large group of CNC Lathe accessories, most are SL4

{ Choice of lots: 52A, 52B (P) } } } } } } } } } } } Large group of CNC Lathe accessories, most are SL4

{ Choice of lots: 52C (P) } } } } } } } } } } } Large Group of Collets

{ Group of lots: 52D, 52E, 52F, 52G, 52H, 52J, 52K (P) } } } } Large Group of risers and spacers

{ Group of lots: 52D, 52E, 52F, 52G, 52H, 52J, 52K (P) } } } } Large group of CNC Lathe accessories, most are SL4

{ Group of lots: 52D, 52E, 52F, 52G, 52H, 52J, 52K (P) } } } } Large group of CNC Lathe accessories, most are SL4

{ Group of lots: 52D, 52E, 52F, 52G, 52H, 52J, 52K (P) } } } } Drawer of Chuck Jaw Sets

{ Group of lots: 52D, 52E, 52F, 52G, 52H, 52J, 52K (P) } } } } Drawer Clean-out of misc hardware and tooling

{ Choice of lots: 52I (P) } } } } } } } } } } } Drawer Clean-out of misc hardware and tooling, some are SL4

{ Group of lots: 52D, 52E, 52F, 52G, 52H, 52J, 52K (P) } } } } Drawer Clean-out of misc hardware and tooling

{ Group of lots: 52D, 52E, 52F, 52G, 52H, 52J, 52K (P) } } } } Large group of CNC Lathe accessories, most are SL4

{ Choice of lots: 53 (P) } } } } } } } } } } } Leblond Makino MC65 Horizontal Mill, this machine is functional, but needs a lot of work to make i...

Leblond Makino MC65 Horizontal Mill PARTS MACHINE. Most of the technical parts have been removed and are included in lot 57. This machine was us...

Leblond Makino MC65 Horizontal Mill, readout screen, fits lots 53, and 54. Also will work on lot 52

Daewoo D-718454 LP Triple Mast Forklift 1058 Hours

2006 Chevy 2500 Panel van, 145,xxx miles. Some rust as pictured. Starts and drives around the lot.

Misc motors and parts for Leblond Makino MC65 Horizontal Mill

Set of 4 Machinery Casters, with crate

Columbiana Vise, workbench not included

Approx 70 gallon direct wire air compressor

Mr Goodaire Air Purifier on casters

Baldor 1 inch belt sander with metal bench

Lot of 12 USA made C Clamps

4 clamps, the ratchet clamp has been welded

{ Choice of lots: 62A, 62B, 62C, 62D, 62E, 62F, 62G, 62H (P) } } } } } } } } } } } T Groove Pallet for LeBlond Makino MC65 Horizontal mill, fits ...

{ Choice of lots: 62A, 62B, 62C, 62D, 62E, 62F, 62G, 62H (P) } } } } } } } } } } } T Groove Pallet for LeBlond Makino MC65 Horizontal mill, fits ...

{ Choice of lots: 62A, 62B, 62C, 62D, 62E, 62F, 62G, 62H (P) } } } } } } } } } } } T Groove Pallet for LeBlond Makino MC65 Horizontal mill, fits ...

{ Choice of lots: 62A, 62B, 62C, 62D, 62E, 62F, 62G, 62H (P) } } } } } } } } } } } T Groove Pallet for LeBlond Makino MC65 Horizontal mill, fits ...

{ Choice of lots: 62A, 62B, 62C, 62D, 62E, 62F, 62G, 62H (P) } } } } } } } } } } T Groove Pallet for LeBlond Makino MC65 Horizontal mill, fits lo...

{ Choice of lots: 62A, 62B, 62C, 62D, 62E, 62F, 62G, 62H (P) } } } } } } } } } } T Groove Pallet for LeBlond Makino MC65 Horizontal mill, fits lo...

{ Choice of lots: 62A, 62B, 62C, 62D, 62E, 62F, 62G, 62H (P) } } } } } } } } } } T Groove Pallet for LeBlond Makino MC65 Horizontal mill, fits lo...

{ Choice of lots: 62A, 62B, 62C, 62D, 62E, 62F, 62G, 62H (P) } } } } } } } } } } T Groove Pallet for LeBlond Makino MC65 Horizontal mill, fits lo...

Assorted Collets with wooden holder

Hartford 3 jaw chuck indexer

Chiandao 3 jaw chuck indexer

CNC Angle Plate, 12 x 16 x 19 inches

{ Choice of lots: 67, 68, 69, 70, 71, 72, 73 (P) } } } } } } } } } } CNC Angle Plate, 12 x 9 x 16 inches

{ Choice of lots: 67, 68, 69, 70, 71, 72, 73 (P) } } } } } } } } } } CNC Angle Plate, 12 x 12 x 12 inches

{ Choice of lots: 67, 68, 69, 70, 71, 72, 73 (P) } } } } } } } } } } CNC Angle Plate, 17 x 19 x 11 inches

{ Choice of lots: 67, 68, 69, 70, 71, 72, 73 (P) } } } } } } } } } } CNC Angle Plate, 12 x 8 x 8 inches

{ Choice of lots: 67, 68, 69, 70, 71, 72, 73 (P) } } } } } } } } } } CNC Angle Plate, 12 x 8 x 8 inches

{ Choice of lots: 67, 68, 69, 70, 71, 72, 73 (P) } } } } } } } } } } CNC Angle Plate, approx 19 x 7 x 10 inches

{ Choice of lots: 67, 68, 69, 70, 71, 72, 73 (P) } } } } } } } } } CNC Angle Plate, approx 19 x 7 x 10 inches

CNC Angle Plate, 17 x 17 x 11 inches, NOTE any accessories seen in pictures are not included. This is being sold as a blank angle plate

CNC Angle Plate, 24 x 10.5 x 12 inches, NOTE any accessories seen in pictures are not included. This is being sold as a blank angle plate

3 jaw chuck, 12 inches across

Walter Rotating Table Type RIS-320 ...[more]

Dr Johannes Heidenhain ROD 700 Encoder, ID Number 203 741 61, serial no. 1366344

Hardened Jig Plate approx 12 x 13

{ Choice of lots: 80A, 80B (P) } } } } } } } } } 4 jaw 15 inch chuck Serial No. 754408

{ Choice of lots: 80A, 80B (P) } } } } } } } } } Niiagawa 12 inch 4 jaw chuck

{ Group of lots: 80C, 80E, 80G, 80H, 80I, 80J } } } } 4 jaw 16 inch chuck

{ Choice of lots: 80D (P) } } } } } } } } } Kitigawa B-208 3 jaw chuck