Lot

80

1999 Hurco #BMC3017 CNC Vertical Machining Center

In Monthly Machinery Auction - Surplus from Manuf...

Please log in or sign up to place a bid.
This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 616-272-6236 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/4
1999 Hurco #BMC3017 CNC Vertical Machining Center - Image 1 of 4
1999 Hurco #BMC3017 CNC Vertical Machining Center - Image 2 of 4
1999 Hurco #BMC3017 CNC Vertical Machining Center - Image 3 of 4
1999 Hurco #BMC3017 CNC Vertical Machining Center - Image 4 of 4
1999 Hurco #BMC3017 CNC Vertical Machining Center - Image 1 of 4
1999 Hurco #BMC3017 CNC Vertical Machining Center - Image 2 of 4
1999 Hurco #BMC3017 CNC Vertical Machining Center - Image 3 of 4
1999 Hurco #BMC3017 CNC Vertical Machining Center - Image 4 of 4
Current bid
bids
Reserve not yet met
Your max bid
USD
Please enter your maximum bid
Place Bid
USD

Your bid is pending
6.00%
18.50%
Register to bid online Register to bid online
You're registered for this auction
Waiting for registration approval
Registration has been declined
Fort Wayne , Indiana
Payment Option
Payment Option
Payment Option
Payment Option
Payment Option
Passed USD
Fort Wayne , Indiana
6.00%
18.50%

Location: Fort Wayne, IN

Loading Fee $ 300

 

1999 Hurco #BMC3017 CNC Vertical Machining Center

 

SPECIFICATIONS (online source - please verify):

Control Ultimax Dual

Table Size  40" x 16"

Max Table Load  1,100 lbs

X Axis Travel  30"

Y Axis Travel  18"

Z Axis Travel  24"

Spindle Nose to Table 7.8" –28.6"

Spindle Speed        RPM

Spindle Motor  15 HP

Spindle Taper  CAT40

Rapid Traverse Rate  945 IPM

Tool Stations  24 ATC Carousel

 

EQUIPPED WITH:

Hurco Ultimax Dual Control

Auctioneer:

BTM Industrial Auctions & Liquidations

Location: Fort Wayne, IN

Loading Fee $ 300

 

1999 Hurco #BMC3017 CNC Vertical Machining Center

 

SPECIFICATIONS (online source - please verify):

Control Ultimax Dual

Table Size  40" x 16"

Max Table Load  1,100 lbs

X Axis Travel  30"

Y Axis Travel  18"

Z Axis Travel  24"

Spindle Nose to Table 7.8" –28.6"

Spindle Speed        RPM

Spindle Motor  15 HP

Spindle Taper  CAT40

Rapid Traverse Rate  945 IPM

Tool Stations  24 ATC Carousel

 

EQUIPPED WITH:

Hurco Ultimax Dual Control

Monthly Machinery Auction - Surplus from Manufacturers Plants!

Ends from
Venue Address
**Multiple Locations**
2051 Harvey St
Muskegon
Michigan
49442
United States

 

 
 
 
 
 
 
 
 
 
 
 
 

Important Information

 

Surplus Metalworking Machinery to Ongoing Operations: Multi-Location Sale

Auction Date & Time: lots start closing on Thursday Dec 9th @ 11:00 AM ET

Locations:**Note assets located in multiple locations**  

Inspections: By appointment only upon request.

Please call 616-745-5953 or email sales@btmindustrial.com

Removals: Please see "Shipping/Removals" for each lot for removal dates, instructions, and loading costs. 

 

 

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Friday, 8:00 AM EST – 8:00 PM EST

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

 
 
 
 
 
 
 
 
 
 
 
 

Terms and Conditions

Sale subject to additions AND deletions. 


Property listed in the auction sale catalog shall be offered for sale or sold by BTM Industrial, and any consignor of such property for whom BTM acts as agent. BTM Industrial strongly recommends to all bidders to thoroughly inspect all items before the auction. 

All Items are listed to the best of our ability, but are sold AS-IS with no warranty expressed or implied!

Under these Terms and Conditions, the term “Bidder” and “Purchaser” shall be used interchangeable and be one of the same. 

1. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and electric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against BTM Industrial, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever. 

2. As used herein, the term “Bid Price” means the price at which a lot is knocked down to the Purchaser, and the term “Purchase Price” means the aggregate of (a) the Bid Price, (b) the Buyer’s Premium and other surcharges, if any, and (c) unless Purchaser is exempt by law from the payment thereof, any Federal, Provincial, State or local sales taxes (or compensating use tax of another State), and any other applicable taxes. Unless exemption from such taxes is established to the satisfaction of BTM Industrial, any Purchaser claiming an exemption will be required to pay the tax to BTM Industrial and seek a refund directly from the taxing authorities. 

3. A sale to the highest Bidder shall be complete upon the auctioneer’s call, with the highest Bidder purchasing the offered lot, in accordance with all the conditions set forth herein, including Purchaser (a) assuming full risk of loss and responsibility thereof, see Point 8 below, (b) immediately making a deposit of not less than twenty-five percent (25%) of the Purchase Price, and (c) paying to BTM the balance of the Purchase Price in full within forty- eight (48) hours after the auction sale for all lots purchased. No lot may be removed until the Purchase Price is paid in full for all lots purchased. To prevent miss-delivery and inconvenience in settlement of a purchase, no lot may be transferred prior to removal by the Purchaser. 

4. If the conditions herein or any other applicable condition(s) are not complied with, in addition to other remedies available by law to BTM Industrial and/or its consignors, including but without limitation, the right to hold the Purchaser liable for the Purchase Price, BTM may, at its option, either (a) cancel the sale in part or in full, retaining as liquidated damages all payments made by Purchaser or (b) resell the property, either publicly or privately, after three (3) days notice to the Purchaser and for the account and risk of the Purchaser, and in such event the Purchaser shall be liable to BTM for any deficiency if the resale is less than the Purchase Price, plus all costs, including warehousing, the pro-rate share of expenses of both sales including reasonable attorneys fees, BTMs’ commission, plus all other charges due here under and incidental damages suffered by 
BTM or its consignor. 

5. Only cash, wire transfer, bank draft or certified check will be accepted as payment of the Purchase Price. Personal or company checks may be accepted by BTM, at its sole option, on the condition that they must be accompanied by a letter from the Purchaser’s bank unconditionally guaranteeing payment of the Purchase Price in full of items purchased. 

6. BTM reserves the right to withdraw any property at any time before actual sale closes. Unless otherwise announced by the auctioneer at the time of sale, all bids are per lot as numbered in the catalog. Lots may be combined or divided at the auctioneer’s choice. 

7. BTM Industrial reserves the right to reject a bid from any Bidder. The highest Bidder as acknowledged by the auctioneer shall be the Purchaser. In the event of any dispute between bidders, or in the event of doubt on the part of BTM as to the validity of any bid, the auctioneer shall have the sole discretion either to determine the successful bidder or to re-offer and resell the lot in dispute. If any dispute arises after the sale, BTM`s sales record shall be conclusive in all respects. 

8. Purchase of any lot is at the Purchaser’s risk with risk of loss immediately passing to Purchaser upon the auctioneer’s call. Neither BTM, nor its consignors, have any liability of any nature whatsoever to Purchaser if the lot is not delivered to Purchaser due to fire, theft, damage, or any other cause. 

9. All lots purchased shall be removed in their entirety from the site at Purchaser’s sole cost and responsibility and by the date as specified in the auction catalog or as posted or announced at the sale. No items may be removed before termination of the sale. Removal shall be at the sole risk and liability of the Purchaser or Purchaser’s agent, and only after Purchaser has provided BTM satisfactory proof of insurance by Certificate of Insurance or otherwise. Purchaser shall fully indemnify BTM and its consignors for any loss arising from damage to any person or property caused to any extent by Purchaser’s removal of the lots purchased. 

10. Purchaser is solely responsible to secure all safety equipment as may be necessary and prudent to meet all government safety standards in using, operating or removing lots purchased.

 
11. If BTM or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, their sole and exclusive liability shall be the return of any monies paid on such lot. 


12. Absolutely no warranty or representation, written or oral, is given with any lot. All statements contained in BTM’s catalog, website, marketing material or by the auctioneers, or in any bill of sale, invoice or elsewhere as to description, size, quantity, quality, capacity, model, serial number, measurements or condition, are approximated statements and shall not be deemed to be representations or warranties, oral or written, with respect to any lot. No sale is invalid or made void by reason of any flaw in a lot or by reason of a lot being incorrectly described, and BTM will not be liable and no compensation will be paid for any such fault or error of description. 

13. All property is sold “AS IS, WHERE IS”. Neither BTM nor the consignor makes any representation or warranty, oral or written expressed or implied, as to the merchant-ability, fitness for a particular purpose, condition of the property, correctness of the description, condition, capacity, age or any other details used to describe the property. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted. 

14. Owners of the machinery have the right to add or remove lots as needed. If item has been paid for, a full refund will be given if lot is deemed not available anymore.

 
 
 
 
 
 
 
 
 
 
 
 
See Full Terms And Conditions

Tags: Hurco, Rapid, Machining Center, Spindle, Taper