Lot

1461

2008 Mori Seiki NL2000/500 CNC Turning Center

In Surplus Machinery - Major Forklift Gear Manufa...

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 616-745-5953 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/8
Bidding has ended
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 1 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 2 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 3 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 4 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 5 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 6 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 7 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 8 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 1 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 2 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 3 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 4 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 5 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 6 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 7 of 8
2008 Mori Seiki NL2000/500 CNC Turning Center - Image 8 of 8
Auctioneer has chosen not to publish the price of this lot
Sulligent, Alabama
6.00%
18.50%

BTM Industrial Auctions & Liquidations

Loading Fee $1,100

2008 Mori Seiki NL2000/500 CNC Turning Center

 

Auctioneer:

BTM Industrial Auctions & Liquidations

Loading Fee $1,100

2008 Mori Seiki NL2000/500 CNC Turning Center

 

Surplus Machinery - Major Forklift Gear Manufacturer

Ends from
Venue Address
7711 US-278
Sulligent
Alabama
35586
United States

Removal Costs:

  • Loading Fees are posted on each lots description area. This is to disconnect, drain fluids, and load ontop an open trailer.
  • You will receive a SEPERATE invoice for loading/removal charges from the rigger Midway Machinery Movers.
  • ***NOTE - INTERNATIONAL BUYERS***  (UPDATE 5/17/21) If you require a sea container, THERE IS NO CONTAINER LOADING AVAILABLE ONSITE DUE TO A CHANGE IN POLICY FROM THE PLANT.

  • Rigger for Container Loading Quotes: NEXGEN CRANE & RIGGING HAMILTON, MS 39746 Contact: Justin Baulch 662-231-9585 ***MUST BE SHIPPED TO THIS RIGGER, THEY CANT COME ONSITE TO LOAD***

Rigger:

  • Midway Machinery Movers (Grand Rapids, MI) (Phone) 616-608-7606 - Only approved rigger onsite, no other riggers will be allowed to remove equipment.
  • If your lot has a load out fee on it, that means it MUST be removed by Midway Machinery Movers due to liability and the agreement we have with the owner. 

Removal Dates:

  • June 2nd - June 9th 2021 (Subject to change if needed)
  • We do NOT provide shipping. See below for suggested freight brokers:

BTM Industrial Suggested Freight Brokers:

  • ATS Logistics Services (St. Cloud, MN) - Craig Lanker 320-248-8536 or craigru@atsinc.com 
  • Tortorigi Transport & Hauling (Birmingham, AL) - Jason Self 205-438-7300 or jason@tortorigi.com

Important Information

This event is now in May. Thank you for your understanding. 

Surplus Machinery - Major Forklift Gear Manufacturer 

INTERNATIONAL BUYERS (CANADA AND MEXICO EXCLUDED) - A $3,000 DEPOSIT IS REQUIRED FOR ALL INTERNATIONAL BIDDERS BEFORE THEY CAN PARTICIPATE IN THE AUCTION, IF YOU WIN ITEMS THIS WILL BE PUT TOWARDS YOUR FINAL INVOICE. IF YOU DO NOT WIN ANY ITEMS, IT WILL BE REFUNDED TO YOUR CARD. THIS WILL NEED TO BE COLLECTED BY CREDIT CARD AS INTERNATIONAL WIRE TRANSFERS TAKE 5-7 BUSINESS DAYS. WHEN YOU SIGN UP FOR THE SALE, YOU WILL THEN BE SENT A REQUEST FOR DEPOSIT. ONCE CONFIRMED, YOU WILL BE APPROVED TO BID.

****INTERNATIONAL WINNING BIDDERS - YOU WILL HAVE (10) BUSINESS DAYS TO HAVE YOUR INVOICE PAID IN FULL EITHER BY WIRE TRANSFER OR CREDIT CARDS. YOUR DEPOSIT WILL BE APPLIED TO YOUR FINAL INVOICE. IF YOU DO NOT COMPLETE PAYMENT BY THIS TIME, YOU RISK LOOSING YOUR DEPOSIT.

****UPDATE (5/17/21): DUE TO A CHANGE IN POLICY FROM THE PLANT, LOADING OF CONTAINERS ONSITE WILL NOT BE ALLOWED. ITEMS WILL HAVE TO BE SHIPPED SOMEHWERE ELSE IF CONTAINER LOADING IS NEEDED.******

Rigger for Container Loading Quotes: NEXGEN CRANE & RIGGING HAMILTON, MS 39746 Contact: Justin Baulch 662-231-9585 ***MUST BE SHIPPED TO THIS RIGGER, THEY CANT COME ONSITE TO LOAD***

 

***NOTE*** POSTED LOADING FEES ARE FOR LOADING ONTO AN OPEN TRAILER. 

Auction Date & Time: Lots start closing on Thursday May 20th at 10:00AM EST

Location: 7711 US-278, Sulligent, AL 35586

Inspection Date and Time: By appointment for machinery/equipment. Please contact Jeff Orlowski 616-204-0936 or jorlowski@btmindustrial.com to schedule appointment. 

Removal: June 2nd to June 9th by appointment (Subject to Change if needed)

Midway Machinery Movers ONLY approved rigger for removals that require a forklift. Posted load out fees are on each lot.

 

We do NOT provide shipping for this auction, ONLY loading. For a quote see below BTM Inudstrial suggested freight brokers, and you will work/pay them directly. 

BTM Industrial Suggested Freight Brokers:

  • ATS Logistics Services (St. Cloud, MN) - Craig Lanker 320-248-8536 or craigru@atsinc.com 
  • Tortorigi Transport & Hauling (Birmingham, AL) - Jason Self 205-438-7300 or jason@tortorigi.com 

18.5% Buyers Premium applies on all online purchases. (3.5% Fee Additional for Credit Card/PayPal Payments)

Payments: Cash, Wire Transfer, Certified Bank Funds Check,  Credit Card (3.5%), PayPal (3.5%), 

 

 

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Thursday, 8:00 AM EST – 10:00 PM EST
  • Friday, 8:00 AM EST – 6:30 PM EST 

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

Terms and Conditions

Sale subject to additions AND deletions (Pre and Post Auction)


Property listed in the auction sale catalog shall be offered for sale or sold by BTM Industrial, and any consignor of such property for whom BTM acts as agent. BTM Industrial strongly recommends to all bidders to thoroughly inspect all items before the auction. 

All Items are listed to the best of our ability, but are sold AS-IS with no warranty expressed or implied!

Under these Terms and Conditions, the term “Bidder” and “Purchaser” shall be used interchangeable and be one of the same. 

1. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and electric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against BTM Industrial, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever. 

2. As used herein, the term “Bid Price” means the price at which a lot is knocked down to the Purchaser, and the term “Purchase Price” means the aggregate of (a) the Bid Price, (b) the Buyer’s Premium and other surcharges, if any, and (c) unless Purchaser is exempt by law from the payment thereof, any Federal, Provincial, State or local sales taxes (or compensating use tax of another State), and any other applicable taxes. Unless exemption from such taxes is established to the satisfaction of BTM Industrial, any Purchaser claiming an exemption will be required to pay the tax to BTM Industrial and seek a refund directly from the taxing authorities. 

3. A sale to the highest Bidder shall be complete upon the auctioneer’s call, with the highest Bidder purchasing the offered lot, in accordance with all the conditions set forth herein, including Purchaser (a) assuming full risk of loss and responsibility thereof, see Point 8 below, (b) immediately making a deposit of not less than twenty-five percent (25%) of the Purchase Price, and (c) paying to BTM the balance of the Purchase Price in full within forty- eight (48) hours after the auction sale for all lots purchased. No lot may be removed until the Purchase Price is paid in full for all lots purchased. To prevent miss-delivery and inconvenience in settlement of a purchase, no lot may be transferred prior to removal by the Purchaser. 

4. If the conditions herein or any other applicable condition(s) are not complied with, in addition to other remedies available by law to BTM Industrial and/or its consignors, including but without limitation, the right to hold the Purchaser liable for the Purchase Price, BTM may, at its option, either (a) cancel the sale in part or in full, retaining as liquidated damages all payments made by Purchaser or (b) resell the property, either publicly or privately, after three (3) days notice to the Purchaser and for the account and risk of the Purchaser, and in such event the Purchaser shall be liable to BTM for any deficiency if the resale is less than the Purchase Price, plus all costs, including warehousing, the pro-rate share of expenses of both sales including reasonable attorneys fees, BTMs’ commission, plus all other charges due here under and incidental damages suffered by 
BTM or its consignor. 

5. Only cash, wire transfer, bank draft, certified check, credit card/PaPal (3.5% additional fee for these types of payments on final invoice amount) will be accepted as payment of the Purchase Price. Personal or company checks may be accepted by BTM, at its sole option, on the condition that they must be accompanied by a letter from the Purchaser’s bank unconditionally guaranteeing payment of the Purchase Price in full of items purchased. 

6. BTM reserves the right to withdraw any property at any time before actual sale closes. Unless otherwise announced by the auctioneer at the time of sale, all bids are per lot as numbered in the catalog. Lots may be combined or divided at the auctioneer’s choice. 

7. BTM Industrial reserves the right to reject a bid from any Bidder. The highest Bidder as acknowledged by the auctioneer shall be the Purchaser. In the event of any dispute between bidders, or in the event of doubt on the part of BTM as to the validity of any bid, the auctioneer shall have the sole discretion either to determine the successful bidder or to re-offer and resell the lot in dispute. If any dispute arises after the sale, BTM`s sales record shall be conclusive in all respects. 

8. Purchase of any lot is at the Purchaser’s risk with risk of loss immediately passing to Purchaser upon the auctioneer’s call. Neither BTM, nor its consignors, have any liability of any nature whatsoever to Purchaser if the lot is not delivered to Purchaser due to fire, theft, damage, or any other cause. 

9. All lots purchased shall be removed in their entirety from the site at Purchaser’s sole cost and responsibility and by the date as specified in the auction catalog or as posted or announced at the sale. No items may be removed before termination of the sale. Removal shall be at the sole risk and liability of the Purchaser or Purchaser’s agent, and only after Purchaser has provided BTM satisfactory proof of insurance by Certificate of Insurance or otherwise. Purchaser shall fully indemnify BTM and its consignors for any loss arising from damage to any person or property caused to any extent by Purchaser’s removal of the lots purchased. 

10. Purchaser is solely responsible to secure all safety equipment as may be necessary and prudent to meet all government safety standards in using, operating or removing lots purchased.

 
11. If BTM or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, their sole and exclusive liability shall be the return of any monies paid on such lot. 


12. Absolutely no warranty or representation, written or oral, is given with any lot. All statements contained in BTM’s catalog, website, marketing material or by the auctioneers, or in any bill of sale, invoice or elsewhere as to description, size, quantity, quality, capacity, model, serial number, measurements or condition, are approximated statements and shall not be deemed to be representations or warranties, oral or written, with respect to any lot. No sale is invalid or made void by reason of any flaw in a lot or by reason of a lot being incorrectly described, and BTM will not be liable and no compensation will be paid for any such fault or error of description. 

13. All property is sold “AS IS, WHERE IS”. Neither BTM nor the consignor makes any representation or warranty, oral or written expressed or implied, as to the merchant-ability, fitness for a particular purpose, condition of the property, correctness of the description, condition, capacity, age or any other details used to describe the property. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted. 

14. 

INTERNATIONAL BUYERS (CANADA AND MEXICO EXCLUDED) - A $3,000 DEPOSIT IS REQUIRED FOR ALL INTERNATIONAL BIDDERS BEFORE THEY CAN PARTICIPATE IN THE AUCTION, IF YOU WIN ITEMS THIS WILL BE PUT TOWARDS YOUR FINAL INVOICE. IF YOU DO NOT WIN ANY ITEMS, IT WILL BE REFUNDED TO YOUR CARD. THIS WILL NEED TO BE COLLECTED BY CREDIT CARD AS INTERNATIONAL WIRE TRANSFERS TAKE 5-7 BUSINESS DAYS. WHEN YOU SIGN UP FOR THE SALE, YOU WILL THEN BE SENT A REQUEST FOR DEPOSIT. ONCE CONFIRMED, YOU WILL BE APPROVED TO BID.

****INTERNATIONAL WINNING BIDDERS - YOU WILL HAVE (10) BUSINESS DAYS TO HAVE YOUR INVOICE PAID IN FULL EITHER BY WIRE TRANSFER OR CREDIT CARDS. YOUR DEPOSIT WILL BE APPLIED TO YOUR FINAL INVOICE. IF YOU DO NOT COMPLETE PAYMENT BY THIS TIME, YOU RISK LOOSING YOUR DEPOSIT.

15. Removal Agreement to bidding in the sale: 

Rigger:

  • Midway Machinery Movers (Grand Rapids, MI) - Only approved rigger onsite, no other riggers will be allowed to remove equipment.
  • If your lot has a load out fee on it, that means it MUST be removed by Midway Machinery Movers due to liability and the agreement we have with the owner. 

Removal Dates:

  • May 3rd to May 21st 2021 by appointment
  • All smaller equipment, tooling, and machinery MUST be picked up between these scheduled dates
  • *NOTE: The larger machinery such as the CNC Machines, Presses, Ovens, etc will have some availbitily to load later than these dates but load out charges may increase if you can't get your machinery picked up by these dates. Please contact auction house with questions. Best to try and plan to get items picked up within the scheduled load out dates.
See Full Terms And Conditions

Tags: MORI, Mori Seiki, Turning Center