16 hp Vanguard gas engine, includes bagger system, in working condition

Needs drive motor repaired, 60" deck, Kawosaki FX80 gas motor, 2287 hours

includes 54" front blade and 60" belly mowing deck, Kohler 22 hp gas engine, hydrostatic drive, hydraulic lift and power angle on blade, 1110 hour...

Motor needs replaced, 60" cutting deck, meter reads 982 hours, 24 x 12 x 12, air tires on rear

Hydrostatic drive, 468 hours, Kohler 17.5hp gas motor, runs and works well, air tires

461 hours, Kohler 725cc gas engine, air tires, runs and works well

13hp Intek gas engine, includes bagger, air tires on rear, in perfect running condition, brand new belts, blades sharpened, 3 speed, 100% serviced...

52" cut new intake, exhaust, valve, carberator, battery, throttle, and chock cables

Runs but does not drive, 7 speed 52" cut

Both run and operate

Lincoln Ranger 9 welder with a Onan Performer 18 Engine has 1561 Hrs Approx. 40' Electro lead and 30' Ground lead.Can do wire or stick NO WIRE LEA...

Miller Deltaweld 450 Constant Potential DC ARC Welding Power Source S/N JB564767 With a Millermatic S-52E Wire controller Welding circuit Rating 1...

Torch Cart and Hoses with One Tank*

Miller ShopMaster CC/CV AC/DC Welding Power, With a Miller S-22A 24V Wire Feeder. With Leads. Good Working Unit ...[more]

Torch set on Dolly with approx. 40' of hose with gauges and torches.

Torch set on Dolly with approx. 30' of hose with gauges and torches.

MN 4212 3/4 HP 1PH 1160 RPM Table Size: 9" x 42" with power feed. ...[more]

MN80608 S/N L - 2184 Table size: 10" x 42" Condition Unknown

with Enco Platinum Plus control panel, Model 100-1599 S/N 441450 Date 94 12 Very good condition, Table size: 9" x 48" with power feed ...[more]

36" Vertical Bandsaw Working condition S/N 3

South Bend Workshop Precision Lathe, 9" swing 4' bed S/N58762, Working Condition   ...[more]

9" swing 4' Bed Serial # 42380 A, Working Condition

7" x 12" cutting capacity, with 1 HP JUI CHUN 1 PH Electric Motor and oiler setup MN 4YG30A S/N 200107 Good Condition ...[more]

6" x 12" cutting capacity with a Dayton Industrial 1 PH Motor  ...[more]

65" W 140" L 32" H with a 2" thick top VERY VERY Strong built table

51" W 155" L 32" H

2, 8" Bench Grinders and box of misc. grinder wheels. 1HP 3 PH and 3/4 HP 3 PH

Wellsaw Metal cutting Bandsaw Model 1000A S/N 61992 With a Baldor 1 HP, Single PH motor. Good Working Condition. ...[more]

24 Drawer Metal Cabinet with misc.

2, 36 Hole Metal Bolt Bins With Misc. nuts, Bolts and Washers

36 Drawer Metal Cabinet With Misc.

includes lathe parts and tooling and drill bits and taps

cabinet sand blaster

Model: DC-225/3-AS,   ...[more]

1/4" thick, 60" x 144" x 36" with steel angle frame

SN: 10172-41940910554, 24 x 36 x 36 welding table with weld Pak100, electric welder 1ph, 115 V wire feed

SN: 7533-703, 225 AMP AC stik welder with leads, 230 V 1 phase

2 tanks with cart, gauges, hoses, oxweld torch, condition is unknown

1 15/16 max width 5/16 max thickeners 5/8 max rod, with 7 dies, floor model, like new

SN: H106035, Model: 410, drive all, belt drive unit

16" x 60" x 63" 2 blue carts on wheels

Model: CGH-25, Clark 2500 Kg, 27" w x 48" l, works

Model: ISO 9002, TUV 2500 Kg, 27" w x 48" l, works

Model: 300-T2, Rigid 300 on tri stand with both threaders, cutter, and new reamer, 115 V,  ...[more]

2 Rigid 450 tri pod stand for 1/8"-6" pipe with soil pipe cutter

(23) 1/2" - 12" core drills Hilti, in good condition, new 12" cost over 500.00 ...[more]

5hp Honda, runs good

Does need some attention

Model: SA-200-F-163, pulls with 2" ball, 4-cylinder gas engine, 3" bench vise, welding clamp, mounted on tongue

SN: 11325, 18" swing x 102" bed, 3" chuck 3 ph, nice clean unit, look good, has tail stock at steady rest, 30" deep 11" overall length, hardened a...

Model: D-150-HD1 1/2 yard blue bump/lever, 7 1/2 x 2 3/4 fork pockets, 5000 lbs cap

Model: D-200-MD, 2 yard blue bump/lever, 3" x 7 1/2 fork pockets, 4000 lbs cap

Serial No: MA210027N, Factory Surplus, Condition Unknown "was lot #2493 in the Bid Book"   ...[more]

Serial No: MJ300172N, Factory Surplus, Condition Unknown "was lot #2494 in the Bid Book"   ...[more]

Serial No: MF063110N , Factory Surplus, Condition Unknown "was lot #2495 in the Bid Book"   ...[more]

Serial No: MC230202L, Factory Surplus, Condition Unknown "was lot #2496 in the Bid Book"   ...[more]

Serial No: 200-002742, Factory Surplus, Condition Unknown "was lot #2497 in the Bid Book"   ...[more]

Serial No: LG290068U, Factory Surplus, Condition Unknown "was lot #2498 in the Bid Book"   ...[more]

Serial No: MB450797U, Factory Surplus, Condition Unknown "was lot #2499 in the Bid Book" ...[more]

Serial No: MA470184A, Factory Surplus, Condition Unknown "was lot #2500 in the Bid Book"   ...[more]