The American Tool Works Company engine lathe, 25" x 144", 2 5/8" work capacity through spindle, 24" 4 jaw chuck, tool post on 35" cross table with...

Dresser Electric Loadlifter, 1-ton chain hoist with trolley, with forward and back, 3 phase

Steel shelf with lathe tools and parts

Steel bench with Craftsman 1/4 HP bench grinder and Black & Decker 8" 1 HP bench grinder ...[more]

(2) bags of Black Beauty blasting abrasive

Lot of UHMW 2", 2.5" and 1" plastic

Single bed frame, dresser, and mirror

Delta 10" chop and miter saw (SN 39-6629)

Bridgeport vertical mill (SN 82911), 9" x 36" table, 1 HP, 3-phase, 220V

Millport 3KVH vertical mill (SN 4765), 10" x 50" table, 3 HP, 3-phase, 230-460V

{ Choice of lots: 68, 69 } Bridgeport vertical mill (SN 114116), 9" x 42" table, 1 HP, 3-phase, 230-460V

{ Choice of lots: 68, 69 } Bridgeport vertical mill (SN 75678), 9" x 42" table, 1 HP, 3-phase, 230-460V

{ Choice of lots: 70, 71 } Bridgeport vertical mill (SN 104282), 9" x 42" table, 1 HP, 3-phase, 230-460V, with AL-500S power feed

{ Choice of lots: 70, 71 } Bridgeport vertical mill (SN 104956), 9" x 32" table, 1HP, 3-phase, 220-440V, with AL-500S power feed

Bridgeport vertical mill (SN 57137), 9" x 42" table, 1HP, 3-phase, 220-440V, with AL-500S power feed

Lot of taper adaptors, hold down rods, taps

Lot of 5-gallon pails of lubricants

Hardware: steel-drawer cabinet and table with miscellaneous hardware, hole saws, counter bores, Woodruff cutters, taps and dies

Miscellaneous drills, cutters, tools, Bridgeport adaptors and parts, with cabinet, 36" x 78" x 18"

Miscellaneous tools, drills, indicators with cabinet, 24" x 78" x 18"

Miscellaneous tools on pegboard, wrenches, hacksaws, vise grips, threading tools, pliers

Miscellaneous hold downs and calipers on peg board

Miscellaneous C-clamps on wall rack

Large cable cutter

82" x 36" x 35" wood-top workbench with miscellaneous chuck jaws, blocks, cutters, taper chucks, and measuring

16" x 22" steel surface plate

24" x 36" stone surface plate and stand

Monarch model K lathe, 16" x 54", 1.5" through spindle, tool post with 20" cross, and tail stock, 10" 2-jaw chuck and steady rest, (SN 44905)

Okuma model LS geared head engine lathe, 22" x 62", 15.5" x 76" bed size, 1-3/4" through spindle, 12" 3-jaw chuck, tool rest on 24" cross with tai...

{ Choice of lots: 84 } Okuma model LS geared head engine lathe, 22" x 62", 15.5" x 76" bed size, 1-3/4" through spindle, 16" 3-jaw chuck, tool re...

Victor 1640D gap bed engine lathe, 16" x 40", 22 3/4" swing in gap, 12.5" x 54" bed size, 16 speed (22-1600 RPM), 2" through spindle, tool post an...

Wooden workbench with sanding belts and discs, grinding discs

{ Choice of lots: 87 } 16" 4-jaw chuck

{ Choice of lots: 88, 89, 90 } 16" 4-jaw chuck

{ Choice of lots: 88, 89, 90 } 14" 4-jaw chuck

{ Choice of lots: 88, 89, 90 } 12" Cushinaw 4-jaw chuck

Lot of (2) racks of hold-downs

Box of hold-downs

{ Group of lots: 93, 94, 95, 96 } Box of mill end cutters

{ Group of lots: 93, 94, 95, 96 } Box of taps

{ Group of lots: 93, 94, 95, 96 } (3) Boxes of miscellaneous drills

{ Group of lots: 93, 94, 95, 96 } Box of cutters and drill centers

{ Group of lots: 97, 98 } Lot of (1) 8" x 8" x 8" angle plate and (1) 3" x 4" x 4" angle plate and blocks

{ Group of lots: 97, 98 } Lot of (3) 4" x 5" x 4" angle plates

Lot of taper drill chucks

Lot of collets

Lot of hold-down plates on bottom shelf

Wilton 4" jaw bullet vise with 82" x 35" x 35" wooden top workbench

Setup block, 14" x 9" x 11"

CM Lodestar 1/4 ton electric chain hoist

Lot of 12.5", 8.5", 7" burnouts

Box of files

{ Choice of lots: 107, 108 } Quickchange toolpost

{ Choice of lots: 107, 108 } Quickchange toolpost

Lot of (3) D50DA-1 tool holders

Lot of (14) Tool holders

Box of tool holders

{ Group of lots: 112, 113 } Box of insert cutters

{ Group of lots: 112, 113 } Box of hold down bolts

96" x 25" x 33" All steel workbench