stainless steel conveyor, 80 in. x 19 in. x 48 in., white belt, stainless steel wash down motor - Located in Dickson, TN { Rigging Fee: $500 } .....

Bridge stainless steel 400 lb. tote dump, model LL-96 on wheels (totes are sold separately in lot 65 )- Located in Dickson, TN { Rigging Fee: $500...

Bridge stainless steel conveyor, 90 in. x 19 in. x 40 in. - Located in Dickson, TN { Rigging Fee: $500 }

Ultra-freeze Cryogenic freeze tunnel, model 30-4-3T, sn 30-419, CO2 cooled, 27 ft. x 32 in., 4-zone, 3-pass - Located in Dickson, TN { Rigging Fee...

stainless steel rotary accumulation table, 42 in. diameter, 33 in. tall - Located in Dickson, TN { Rigging Fee: $150 }

stainless steel conveyor, 38 in. x 8 in., with stainless steel wash down motor - Located in Dickson, TN { Rigging Fee: $100 }

Best Flex conveyor - Located in Dickson, TN { Rigging Fee: $50 }

Strong Arm stainless steel wall cabinet, no HMI - Located in Dickson, TN { Rigging Fee: $50 }

Cozzini stainless steel tote dump, with hydraulic pump, 70 in. dump height - Located in Dickson, TN { Rigging Fee: $400 }

Cotterman aluminum narrow 5-step rolling ladder, 16 in. wide - Located in Dickson, TN { Rigging Fee: $25 } ...[more]

Cozzini stainless steel screw auger feeder model CSI2500, 88 in. long x 34 in. deep, with incline screw feeder 12 ft. x 18 in. - Located in Dickso...

stainless steel 5-step platform, 72 in. x 24 in. x 48 in. - Located in Dickson, TN { Rigging Fee: $150 }

Formax Magnum 700 patty former, model M-700, sn F6K790k, with (2) carts and dies - Located in Dickson, TN { Rigging Fee: $2000 }

Formax feed conveyor, shuttle end, 70 in. x 36 in. x 48 in. tall, stainless steel wire belt - Located in Dickson, TN { Rigging Fee: $500 }

white belt conveyor with wash down motor, goes through wall, 108 in. x 36 in. x 42 in., on wheels with track on floor - Located in Dickson, TN { R...

outfeed conveyor from oven to carmelizer, 72 in. x 39 in, washdown motor and drive - Located in Dickson, TN { Rigging Fee: $250 }

Caswell holding tank pump, with waterfall carmelizer, conveyor 36 in. x 39 in. - Located in Dickson, TN { Rigging Fee: $500 }

stainless steel spiral patty freezer with control panel, 33 ft. x 28 ft. 16 ft. tall overall, 40 in. wide plastic belt, 3 in. clear space, 21 tier...

Ecolab CIP sanitation controller for spiral, model 5600- Located in Dickson, TN { Rigging Fee: $500 } ...[more]

Fastback shaker conveyor outfeed, dimple stainless steel, 10 ft. x 24 in. - Located in Dickson, TN { Rigging Fee: $750 }

stainless steel incline conveyor, 8 ft. tall, blue belt, 30 in. width - Located in Dickson, TN { Rigging Fee: $1000 }

Fastback dimple stainless steel conveyor, 8 ft. x 16 in., into scale - Located in Dickson, TN { Rigging Fee: $750 }

2011 Heat and Control, 14-bucket scale, model CCW-R-214-W-1-S/70-WP-H, dimple buckets, with control panel - Located in Dickson, TN { Rigging Fee: ...

CEIA flow through metal detector - Located in Dickson, TN { Rigging Fee: $250 }

tub conveyor filler with bidirectional conveyor 8 ft. - Located in Dickson, TN { Rigging Fee: $500 }

stainless steel mezzanine for scale, 10 ft. x 10 ft., with L-shape 10 ft. x 20 ft. welded, Lapeyre stairs - Located in Dickson, TN { Rigging Fee: ...

Reitz stainless steel twin screw blender, 2-drive, jacketed, 64 in. x 46 in. x 32 in. - Located in Dickson, TN { Rigging Fee: $750 }

stainless steel platform on blender, 3-step, 48 in. x 36 in. x 30 in. - Located in Dickson, TN { Rigging Fee: $150 }

(8) 400 lb. stainless steel carts, 24 in. x 24 in. x 24 in. - Located in Dickson, TN { Rigging Fee: $200 } ...[more]

galvanized drive in style pallet rack, 42 in. wide opening, 6-bays, 3-deep, 4-tall - Located in Dickson, TN { Rigging Fee: $1500 }

galvanized drive in style pallet rack, 42 in. wide opening, 6-bays, 2-deep, 4-tall - Located in Dickson, TN { Rigging Fee: $1500 }

Urschel slicer, model J-A, sn 634, with shields, on wheels - Located in Dickson, TN { Rigging Fee: $250 }

stainless steel spiral gravy in bag freezer with control panel, 21 ft. x 31 ft. 16 ft. tall overall, 34 in. wide plastic belt, 3 in. clear space, ...

Ecolab CIP controller for freezer, model S-6000- Located in Dickson, TN { Rigging Fee: $500 } ...[more]

stainless steel conveyor, 17 ft. x 12 in., stainless steel wash down motor, suspended from ceiling - Located in Dickson, TN { Rigging Fee: $750 }

stainless steel spiral decline outfeed conveyor, 8 ft. top, x 5 ft. decline, 30 in. wide white plastic flighted belt - Located in Dickson, TN { Ri...

stainless steel decline conveyor, 4 ft. x 4 ft. x 12 in. wide - Located in Dickson, TN { Rigging Fee: $750 }

7-step stainless steel platform, green poly deck - Located in Dickson, TN { Rigging Fee: $250 }

stainless steel table, 42 in. x 24 in. x 29 in. tall - Located in Dickson, TN { Rigging Fee: $20 }

stainless steel Strong Arm pedestal - HMI NOT INCLUDED - Located in Dickson, TN { Rigging Fee: $50 }

stainless steel table, 42 in. x 24 in. x 36 in. tall, on wheels - Located in Dickson, TN { Rigging Fee: $20 }

stainless steel table, 36 in. x 36 in. x 35 in. tall - Located in Dickson, TN { Rigging Fee: $20 }

stainless steel table, 42 in. x 24 in. x 30 in. tall, adjustable legs - Located in Dickson, TN { Rigging Fee: $20 }

stainless steel Strong Arm pedestal - HMI NOT INCLUDED - Located in Dickson, TN { Rigging Fee: $50 }

Cotterman stainless steel 3-step rolling ladder - Located in Dickson, TN { Rigging Fee: $10 }

(1) stainless steel table 72 in. x 24 in. x 30 in. tall; (1) stainless steel table 48 in. x 24 in. x 28 in. tall - EACH - Located in Dickson, TN {...

stainless steel Strong Arm pedestal - HMI NOT INCLUDED - Located in Dickson, TN { Rigging Fee: $50 }

2005 Deville stainless steel chopper, model Flexifam, sn 5103-6265, was chopping sausage patties into crumbles, with stainless steel incline conve...

(2) gearboxes for patty or gravy freezers - Located in Dickson, TN { Rigging Fee: $50 }

Strong Arm pedestal, no HMI- Located in Dickson, TN { Rigging Fee: $100 }

stainless steel deaerator tank, 60 in. dia. X 96 in tall, dish bottom, on legs., #27- Located in Newport, TN { Rigging Fee: $1500 }

stainless steel deaerator tank, 60 in. dia. X 96 in tall, dish bottom, on legs., #28 - Located in Newport, TN { Rigging Fee: $1500 }

2010 Lee steam jacketed 3,000 gallon ketchup 316L stainless steel mix tank, model 3000U9MS, sn 62232-1-2, NB 11834, MAWP jacket 125 psi @ 353 deg....

2010 Lee steam jacketed 3,000 gallon ketchup 316L stainless steel mix tank, model 3000U9MS, sn 62232-1-1, NB 11834, MAWP jacket 125 psi @ 353 deg....

2016 centrifugal pump model WS+44/50 and motor - Located in Newport, TN { Rigging Fee: $150 }

hot water skid condensate tank - Located in Newport, TN { Rigging Fee: $300 }

2016 SPX positive displacement pump, model 220-U2, drive, 20 hp motor, 4 in flange - Located in Newport, TN { Rigging Fee: $200 }

2017 centrifugal pump model WS+44/50 and 25 hp motor - Located in Newport, TN { Rigging Fee: $150 }

(2) stainless steel strainers, 8 in. x 36 in. long, 4 in. sanitary fittings - EACH - Located in Newport, TN { Rigging Fee: $200 }

CIP diverter manifold - Located in Newport, TN { Rigging Fee: $150 }