20" 4-Jaw Chuck (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 69, 70, 71 } 12" 3-Jaw Chuck (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 69, 70, 71 } 15" 3-Jaw Chuck (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 69, 70, 71 } 20" Faceplate and Misc Adaptors (SOLD AS-IS - NO WARRANTY)

10" Pedestal Grinder (SOLD AS-IS - NO WARRANTY)

HES 24” x 108” Geared Head Gap Bed Lathe s/n 15239 w/ Newall C80 Programmable DRO, 24-960 RPM, Inch/mm Threading, Tailstock, (2) Steady Rests, 16”...

Tool Post and Tool Holder (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 77, 79, 80 } Dead Centers (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 77, 79, 80 } Quick-Change Tooling (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 77, 79, 80 } KDK Tool Post (SOLD AS-IS - NO WARRANTY)

10" Magnetic Chuck (SOLD AS-IS - NO WARRANTY)

5-Drawer Work Bench (SOLD AS-IS - NO WARRANTY)

Vidmar 10-Drawer Tooling Cabinet w/ Endmills, Taps, Reamers, Key-S Cutters and Misc (SOLD AS-IS - NO WARRANTY)

15-Drawer Tooling Cabinet w/ Taper-Shank Drills and Misc (SOLD AS-IS - NO WARRANTY)

16" 3-Jaw Chuck (SOLD AS-IS - NO WARRANTY)

Osama 14” x 40” Geared Head Gap Bed Lathe s/n 80110 w/ Newall C80 Programmable DRO, Inch/mm Threading, Tailstock, 8” 3-Jaw Chuck (SOLD AS-IS - NO ...

Aloris Tool Post and Tool Holders (SOLD AS-IS - NO WARRANTY)

Steel Work Benches (2) (NO CONTENTS) (SOLD AS-IS - NO WARRANTY)

Schenck Trebel mdl. FC 8D-XN Dynamic Turbine Balancing Machine s/n 4072/KOM.25903/260175 w/ 1500-100,000 Lb Cap, 100” Max Diameter, 3”-25” Shaft D...

Hofmann HD-23.1D 10-5000 Lb Cap Dynamic Turbine Balancing Machine s/n 98-4-301 w/ Hofmann Polar Graphics Controls, 16’ 9” Bed, 10Hp Motor (SOLD AS...

Schenck Trebel HA5B Dynamic Turbine Balancing Machine s/n AHG0132 (SOLD AS-IS - NO WARRANTY) ...[more]

39" x 90" x 1 1/2" Steel Table (SOLD AS-IS - NO WARRANTY)

Welding Torch (NO TANKS) and Propane Heating Torch (SOLD AS-IS - NO WARRANTY)

Carlton 6’ Arm x 19” Column Radial Arm Drill w/ 15-1500 RPM, Power Head Travel, Power Column and Feeds, 18” x 24” x 12” Tooling Block (SOLD AS-IS ...

Chevalier Vertical Mill s/n 828286 w/ Newall DP700 Programmable DRO, 60-4500 Dial Change RPM, Chrome Ways, Power Feed, 9” x 42” Table (SOLD AS-IS ...

{ Group of lots: 101, 101A } 7" Machine Vise (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 101, 101A } R8 Tooling (8) (SOLD AS-IS - NO WARRANTY) ...[more]

R8 Collets and Tooling (11) (SOLD AS-IS - NO WARRANTY) ...[more]

Electric Hydraulic H-Frame Press w/ Rolling Stand (SOLD AS-IS - NO WARRANTY) ...[more]

Morrison Broaching Machine s/n K145646 w/ 24” x 27” Table (SOLD AS-IS - NO WARRANTY) ...[more]

DoAll 8” x 24” Automatic Hydraulic Surface Grinder w/ Coolant (SOLD AS-IS - NO WARRANTY)

King 62” Vertical Boring Mill w/ 1.8-38.4 RPM, (2) Turning/Facing Heads, 69” Swing, Power Feeds, 62” 4-Jaw Chuck (SOLD AS-IS - NO WARRANTY) ...[m...

Bullard 54” Vertical Boring Mill w/ 4.3-160 RPM, 63” Swing, Hydraulic Tracer Head, Turning/Facing Head, Power Feeds, 54” 4-Jaw Chuck (SOLD AS-IS -...

Pedestal Buffer (SOLD AS-IS - NO WARRANTY)

Scharmann Horizontal Boring Mill s/n 6652 w/ 3.4-650 RPM, 50-Taper Spindle, 6” Spindle. 55 ½” x 64” Table (SOLD AS-IS - NO WARRANTY)

Scharmann “Opticut FB 90” Horizontal Boring Mill s/n 79-142-145 w/ Acu-Rite “Master-MP” 3-Axis Programmable DRO, 10-1525 RPM, 4” Spindle, Tailstoc...

{ Group of lots: 115, 116 } Criterion Boring Heads (2) (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 115, 116 } NTMB-50 Taper Tooling (13) (SOLD AS-IS - NO WARRANTY) ...[more]

{ Group of lots: 118, 119 } Hold-Downa w/ Rack (SOLD AS-IS - NO WARRANTY) ...[more]

{ Group of lots: 118, 119 } Boring Mill Boring Bars w/ Rack (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 121, 122 } 18" x 18" x 18" Angle Plates (2) (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 121, 122 } 10" and 6" Riser Blocks (4) (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 123, 124 } CAT-50 Taper Tooling (4) (SOLD AS-IS - NO WARRANTY) ...[more]

{ Group of lots: 123, 124 } NTMB-50 Taper Tooling (5) (SOLD AS-IS - NO WARRANTY) ...[more]

Hold-Down Risers (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 127, 128 } Drill Chuck and Boring Bars (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 127, 128 } Tooling Extensions (SOLD AS-IS - NO WARRANTY)

Drawered Work Bench w/ Misc (SOLD AS-IS - NO WARRANTY)

Storage Cabinet w/ Misc Tooling (SOLD AS-IS - NO WARRANTY)

Rotex mdl. 10 10-Station Hole Punch w/ 18” Throat, Rolling Stand (SOLD AS-IS - NO WARRANTY) ...[more]

Arbor Press w/ Speed Wheel and Stand (SOLD AS-IS - NO WARRANTY)

Liang Yu 12” Rotary Table (SOLD AS-IS - NO WARRANTY) ...[more]

Yuasa 12” Rotary Table w/ 11” 3-Jaw Chuck (SOLD AS-IS - NO WARRANTY)

8” Rotary Table (SOLD AS-IS - NO WARRANTY)

Cincinnati 8” 4-Jaw Compound Sine Chuck (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 138, 139 } Mill Centers (2) (SOLD AS-IS - NO WARRANTY) ...[more]

{ Group of lots: 138, 139 } Mill Centers (3) (SOLD AS-IS - NO WARRANTY)

10” x 15” Adjustable Angle Plate (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 141, 142, 143 } 6" x 7" Sine Table (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 141, 142, 143 } 22" x 18" x 12" Angle Fixture Table (SOLD AS-IS - NO WARRANTY)